如果你能够对于近未来避免恐惧的想法，你将能够以最小的努力通过改变，并且任何较低的振动都不能接触到你。
If you can avoid fearful thoughts about the immediate future, you can move through the changes with little effort and nothing of the lower vibrations will be able to touch you.
随着终结时刻的接近，为了唤醒那些仍然住在低振动中的人，这种接触方式是如此的必要。
With the nearness of the end times, such contacts are so necessary to awaken those who still live in the lower vibrations.
根据接触悬挂系统中的接触线振动方程，推导了接触线应力的均值和方差的计算公式。
Vibration equations of contact wires were used to derive the formulae for calculation of mean and standard deviations of stresses.
这意谓着为了使第一次接触的发生，有个“你们集体潜意识的振动水平”的先在要求。
This implies that in order for First Contact to take place, there is a pre-required level of vibrations from you as Collective Consciousness.
可采用多种钢轨廓形，使每种廓形与车轮均有一定数量的接触点，可以提高导向性能和总体的车辆运行质量，从而减少噪声和振动。
Use of a variety of rail profiles with a range of contact points improves steering and overall ride quality, and thereby reduces noise and vibration.
将曲线通过车辆和曲线连续梁桥分为两个由非线性轮轨接触力联系的振动子系统。
Take the curve negotiating vehicle and curve continuous beam bridge as two vibration subsystems connected by nonlinear contact force between wheel and track.
相反，机车车辆构架蛇行波反映了引起此系统横向振动所有因素的影响，同时还反映了轮轨实际接触状态。
On the contrary, the hunting wave of car bogie frame covers the influence of all factors causing transverse vibration of the system and reflects the action of different wheel-rail contact conditions.
滚动轴承零件各接触表面的波纹度是引起轴承振动的主要原因。
The waviness of each contact surface of a ball bearing is the main reason which causes the ball bearing vibration.
根据桥梁挠度检测的工作特点及要求，采用线阵CCD实现对桥梁振动挠度的远距离、非接触性、动态自动化检测。
According to the characteristic and demand of the bridge vibration measurement, the linear CCD detect technology is chosen t to realize the non-contact and mobile automatic measurement.
本文首先介绍了列车振动荷载产生和作用的机理，轮轨耦合动力学分析模型，轮轨接触模型和轮轨不平顺模型。
This paper introduces the producing and acting mechanics of the train vibration loads, wheel-rail couple dynamic model, wheel-rail contact model and irregularity model.
如果在此生你接触了大量较低的振动，它的目的也是为了支持你去前进。
If in this lifetime you have had much contact with the lower vibrations, it is for the purpose of assisting you to progress.
研究CMG中角接触球轴承在随机振动下的安全性。
The safety of angular contact ball bearing in CMG under random vibration is investigated.
采用系统的方法研究了活塞-连杆-曲轴三者在相互接触条件时，在不同转角下的固有振动特性。
Have studied the natural vibration characteristic of the piston - connecting rod - crankshaft while keeping in touch with the condition each other adopting systematic methods.
高速旋转叶片振动的非接触测量是叶片振动测量中极具发展前景的技术。
Noncontact measuring of high speed rotating blade vibration is the most promising technology in the blade vibration measuring.
本系统的研制为动态接触问题的研究及振动测试开发了新的研究工具。
The development of this system will offer a new research tool for dynamic test of contacting problem and vibration test.
本文利用实验和有限元法相结合对接触系统的非线性振动特性进行研究。
In this paper, the nonlinear vibration characteristic of contact system was studied by using the experimental method and the finite element method.
目的探讨手传振动对接触者早期职业损害的指标，避免发生手传振动导致的不可逆改变。
Objective to study the early indicator of hand arm vibration damage and avoid irreversible changes of hand arm vibration disease.
预紧接触式垫层结构中的预紧力是随系统的状态而改变的，在一定的振动环境下，会产生滑移、接触分离等现象。
The prepressing-force is changed by the state of the prepressing-contact cushion structure, and the slip phenomenon is appeared in the vibration environment.
建立刚性悬挂接触网的自由振动有限元模型，计算其固有频率和振型。
The finite element model of the free vibration for the rigid suspension catenary and pantograph is set up.
在温度和振动等综合应力的作用下，航天电连接器的主要失效形式为接触失效。
Under the action of multiple stresses, contact failure is the main failure mode of aerospace electrical connectors.
针对以往研究齿轮系统拍击振动方法存在的不足，提出了齿轮系统拍击振动中高速碰撞和低速接触的概念。
The concepts of high speed impact and low speed contact in gear rattling were proposed firstly in accordance with the disadvantages of the present methods.
炮口振动速度测试可以采用激光测振仪，它是基于多普勒原理的激光非接触测振技术而研制的。
With the laser scanning vibrometer, based on the Doppler effect, the muzzle vibration velocity is measured.
论述了螺旋锥齿轮动力学研究的三种主要方法，即加载接触分析（LTCA）、解多维非线性方程组的方法，以及加载接触分析与周向振动模型结合的仿真分析方法。
The first method was loaded tooth contact analysis(LTCA), the second method was to solve nonlinear dynamics equation and the third method is to integrate torsional vibration model with LTCA.
第二，分析接触网的振动特性；
在此基础上，设计出利用无接触感应电能传输的超声振动刀柄集成系统。
The system integrated with Ultrasonic-vibration toolholder based on contactless inductive power transfer is designed.
本文用有限元法分析与舷外水相接触的船底板的自由振动。
In this paper the finite element method is used to analyse the free vibrations of the ship bottom plates contacting with surrounding water.
应用非接触式的电磁作动器，采用模拟器件设计了一整套圆盘横向振动的主动控制系统，并对圆盘进行了振动主动控制实验。
Non contact electromagnetic actuator was used in the active control system of transverse vibration of circular disk composed of analog circuits.
测量路基与铁轨的振动是铁道建设必不可少的仪器，采用线阵CCD测量系统能够实现对路基与铁轨的振动进行非接触同步测量。
The device of measuring the vibration of roadbed and rail is necessary when we build rail. The linear Array CCD can be used to automatic non-contact measurement of railway track vibration.
测量路基与铁轨的振动是铁道建设必不可少的仪器，采用线阵CCD测量系统能够实现对路基与铁轨的振动进行非接触同步测量。
The device of measuring the vibration of roadbed and rail is necessary when we build rail. The linear Array CCD can be used to automatic non-contact measurement of railway track vibration.
应用推荐