根据挤压铸造工艺特点，进行了分类。
According to the characteristics of the squeeze casting process, I had classified it.
本文重点介绍了一种新型挤压铸造工艺。
A newly developed novel squeeze casting technique is introduced.
研究了镁合金间接挤压铸造工艺及模具。
The indirect squeezing casting process and the die structure for the Mg alloy were investigated.
阐述了挤压铸造比压对形核率及成长线速度的影响。
Effects of the specific pressure on nucleation rate and linear growth velocity were expounded in squeeze casting.
可通过吹膜、挤压铸造、溶液铸造或轧光工艺制造。
It can be made by blowing, extrusion casting, solution casting, or by calendaring.
一模多件挤压铸造是一种高效的金属成型工艺方法。
Shaping multiple-part with one die by liquid forging as a high efficiency technology for metal shaping has been investigated in this paper.
浸渗的方法主要有压力铸造、挤压铸造及气压浸渗铸造。
Infiltration includes die casting, intrusion casting, gas infiltration casting and so on.
挤压铸造是一种节能、省力和材料利用率较高的成型工艺。
As one new molding process, Squeeze casting famous on the virtue of source saving and higher materials utilization.
研究了AZ91D镁合金在不同半固态温度下的挤压铸造。
The squeezed-casting formability of AZ91D magnesium alloy in semi-solid state was studied.
经试验，挤压铸造的球墨铸铁耙片力学性能好，生产成本低。
Experiments indicates that the harrow piece of nodular cast iron in squeezing casting has the features of excellent mechanical properties and low production cost.
这些界面反应物主要来自挤压铸造时粘结剂与熔融的镁反应。
These interfacial reaction products are mainly from the reaction between the binder and the melted magnesium.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
分析了挤压铸造工艺对棒状ZA27合金力学性能及组织的影响。
The influence of squeeze casting technique on mechanical properties and microstructure of bar-shaped ZA27 alloy was investigated.
试验证明，采用挤压铸造新工艺可以获得优质的铝合金泵体铸件。
It has been proved that to make use of squeeze casting to produce the body of gear pump can get good quality casting of aluminum alloy.
给出了直接式挤压铸造模具和双分型面挤压铸造模具设计技术要点；
The key design points of die for direct squeezing casting and the die with two-parting surface were introduced.
本文主要研究了大高径比ZA27合金铸件挤压铸造过程的若干基本问题。
The fundamental problems of ZA27 alloy squeeze casting with high ratio of height to thickness were studied in this paper.
本文研究了挤压铸造时不同加压压力对铝合金结晶组织和机械性能的影响。
In this paper, the effects of pressurizing value on aluminum alloy crystal structure and the mechanical properties in squeeze casting process have been studied.
其研究成果丰富了挤压铸造理论和工艺的应用范围，具有较大的实用意义。
The achievements have enlarged the application range of theory and technology of squeeze casting, with higher reality sense.
采用立式挤压铸造工艺，产品能以较高的质量、较低的成本满足使用要求。
The brake pump products of vertical squeeze casting were good in qualities and low in cost.
研究了挤压铸造中金属液流的充型特性，利用高速摄影观察溶体的充填状态。
This paper studies the filling type characteristics of the metal liquid flow in squeeze casting, and employs high-speed photography to examine the filled state of melting body.
论述了以低速、流量、稳充填铸型并在瞬间及时增压是挤压铸造的基本原理。
Mold filling smoothly with low speed and large flow rate as well as instant pressurization in time conformed to the basic principles of squeezing casting.
利用挤压铸造技术生产高铝锌基合金直齿圆锥齿轮，齿面精度能够得到保证。
The high al, Zn base alloy conical gear with straight tooth in squeezing casting can ensure an accuracy of tooth face.
利用挤压铸造制备了纤维增强铝合金复合材料，研究了复合材料的界面偏析。
Fiber reinforced aluminum alloy composites are manufactured by squeeze casting. Segregation at interface of the composites is studied.
用中断挤压铸造法研究了ZL 109合金液在莫来石纤维预制块中的流动状况。
The flow front of ZL109 melt in mullite chopped fibre preform during melt infiltration was investigated with a method called stopping squeeze casting.
介绍了铸铁锅挤压铸造的工艺过程、工艺控制、铸型制作及气动压锅机的结构等。
The technological process, technological control, mold making as well as the construction of pneumatic pot squeezing casting machine have been separately introduced.
对不连续碳纤维增强ZA - 12合金基复合材料的挤压铸造工艺进行了研究。
Fabrication technique of discontinuous carbon fibers reinforced ZA-12 alloy matrix composite was studied.
基于有限差分法，对大型铝合金支架间接挤压铸造充型和凝固过程进行了数值模拟。
Numerical simulation of filling and solidification of large aluminum alloy support frame in indirect casting was conducted based on FDM.
指出合理的挤压铸造工艺可细化合金显微组织，提高铸件致密性，改善合金力学性能。
It is pointed out that the rational squeezing casting technology can refine microstructure and improve the component compactness as well as the mechanical properties of alloy.
采用挤压铸造法制备出二维碳纤维织物增强镁基复合材料，并对其基本性能进行了研究。
Two dimensional carbon fiber fabric reinforced magnesium matrix composites were prepared by squeeze casting technology, and their basic properties were studied.
采用挤压铸造法制备出二维碳纤维织物增强镁基复合材料，并对其基本性能进行了研究。
Two dimensional carbon fiber fabric reinforced magnesium matrix composites were prepared by squeeze casting technology, and their basic properties were studied.
应用推荐