我在挤压管行业工作。
此外，挤压管建设，必须比其他气瓶少支持。
Additionally, the extruded tube construction requires fewer supports than other cylinders.
具有双孔截面的铝合金挤压管的断面形状满足几何相似定律。
The geometrical similarity law in cross section was satisfied for the aluminum extruded tubes with a double hollow section.
用化妆棉会有点复杂，最好还是用手指来用，如果它是挤压管的形状可能会更方便使用。
A bit tricky to apply with cotton wool, you have to use your fingers; might be easier if it was in squeezy tube.
介绍了挤压铸造制造铝合金自行车把立管的设备结构及工艺流程。
The equipment, mould structure and processing of manufacturing aluminum alloy handle stems of bicycle using extrusion casting method are presented.
研制出两套立式模具和一套卧式模具，实现了用工艺方法增加热挤压三通支管高度，缩小三通相贯区内拐角处圆弧半径的目的。
Developed excogitates of two decumbence and one hovizoutal molding die realized increasing height of branch pipe of heat pressure tee and reducing radius of synodical arc of tee.
根据生产经验，分析了D 97多孔扁管连续挤压时开裂的原因，并提出了改进措施。
According to production experience, the cracks reason of D97 multi-port tube during continuously extruding is analyzed. The improvement method is also presented.
对电站锅炉用热挤压合结管进行了系统的研制开发。
The article introduces the systematic research and development of hot extruded alloy structure tubes for power station boilers.
对镁合金管件挤压成形工艺进行了实验研究，确定了其成形工艺参数。
The forming process of magnesium alloy extrusion tubes was researched, the forming parameters were determined.
本文在研究国内外花键生产的基础上，对内外空心花键管的成形进行了工艺性分析，提出了花键管的冷挤压工艺。
Based on the analysis to the current spline forming process at home and abroad, the spline tube forming process was studied and the cold extrusion process was suggested.
介绍了一种新的奥氏体不锈钢无缝管材制备工艺，即对空心铸坯直接热挤压制备荒管。
A new processing technique for seamless tubes manufacture of austenitic stainless steel is introduced, in which hollow cast blank is directly used for hot extrusion.
螺旋焊管是以带钢卷板为原材料，经常温挤压成型，以自动双丝双面埋弧焊工艺焊接而成的螺旋缝钢管。
Spiral welded pipe is a strip coil as raw material, often warm extrusion molding, to automatically double-wire submerged arc welding process double-sided spiral welded pipe joints.
本文提出了一种用于行波管螺旋慢波组件的挤压新方法并自制了相应的冷挤压设备样机。
The equipment has been used to assemble helix-type slow-wave structure packages, and can meet the requirements of the manufacture of TWTs.
采用冷挤压成形工艺方法，能生产出各种尺寸、规格的深圆锥形管件。
In this paper, we study the technique of cold extruding forming, and produced all kinds of the long conical pipe in that way.
针对带孔深锥形管件的成形特点进行了工艺分析，确定了成形方案，设计了锥形管挤压模和冲孔模。
The extrusion and piercing die was developed based on the technical analysis on the shaping characteristics of deep taper pipe with hole.
传统的TP2铜管生产方法——挤压法是由连铸实心铸坯挤压成管坯，再经过拉拔加工成管材。
The extrusion process is a traditional method for the TP2 copper tubes, in which continuous casting solid billet is extruded to hollow tube billet firstly and then drawn to tube.
相反，这种材料可挤压的体积超过3英寸设计师有时渴望沿管长的具体形状。
Conversely, the material can be extruded to sizes exceeding 3 in. Designers sometimes desire a specific shape along the tube length.
[9]张宏亮。粉末冶金钼管热挤压工艺基础研究[D]。太原：太原理工大学，2010。
ZHANG Hong-liang. The fundamental research of hot extrusion process for powder metallurgy molybdenum tube[D]. Taiyuan: Taiyuan University of Technology, 2010.
介绍了一种新的奥氏体不锈钢无缝管材制备工艺，即对空心铸坯直接热挤压制备荒管。
A new processing technique for seamless tubes manufacture of austenitic stainless steel is introduced in the present work, in which die casted hollow blank is directly used for a hot extrusion.
主要用于PV C管、板、片、膜、型材、造粒等塑料制品的塑化和挤压成型。
It is mainly used in plasticizing, extruding and forming PVC pipe, plate, sheet, film, profile, and granulator etc.
液态挤压工艺是直接成形管、棒、型材的全新工艺。
Liquid extrusion is a new process for direct formation of tubes, rods and shape products.
采用注塑、吐料、挤压成型、焊合的方式，可为铝塑复合管、塑料管注上塑料肩部。
It operates by plastic injecting, spitting, squeezing and welding for making a plastic shoulder for plastic tubes and aluminum-plastic tubes.
此文介绍了连续挤压内凸筋口琴管模具的设计方法及其模具芯头的冷挤压加工。
This paper is about die tongue making: the design method and cold-press formation.
采用冷挤压成形工艺方法，能生产出各种尺寸、规格的深圆锥形管件。
Cold working strain phosphating includes drawbench phosphating, cold extrusion phosphating and cold stamping phosphating.
本文通过对花键筒的成形方式选择和成形过程分析得出对不规则截面管件挤压变形过程中力的分析和计算方法。
In this paper, over the analysis of forming mode selection and forming process of spline tube, the pressure analysis and calculating method during extr...
以6061t1(挤压态及退火态)铝合金为研究对象，探讨工艺参数对三维非轴对称管件缩径旋压成形的影响。
Investigating the tubes of 6061t1 aluminium treated by both the extrusion and anneal, the effects of forming parameters on neck-spinning process of 3d non-axisymmetric tubes are presented.
对紫铜长支管T型管复合胀形工艺进行了试验研究，介绍了包括冲头挤压力的公式与计算，试验中所用复合胀形模具结构和部分重要零件的设计与选取及试验结果。
A technology to form copper long-branch tee pipe directly in compound forming of bulging and extrusion is developed, the formula and calculation of the forming force are introduced.
随着积分手动装置，一管槽完全打开(不捏)，以及一个管槽挤压状态关闭断电。
With Integral Manual Override, one tube slot is fully opened (not pinched) and one tube slot is pinched closed in de-energized state.
随着积分手动装置，一管槽完全打开(不捏)，以及一个管槽挤压状态关闭断电。
With Integral Manual Override, one tube slot is fully opened (not pinched) and one tube slot is pinched closed in de-energized state.
应用推荐