采用热挤压法成型制备出卤化银多晶光纤。
The silver halide fibers were made by means of hot extrusion.
本文结合开展的试验，重点介绍了堆积法和挤压法。
With experiments, the stacking-capillary method and extruded method areintroduced.
方法应用挤压法与粘贴法对同一人群进行蠕形螨检查。
Methods Squeezing method and cellophane tape method were used to detect nasal Demodex infection in the same population.
比较了立式挤压和卧式挤压法生产中空刨花板的特点。
The article compared the characters of longitudinal and horizontal extrusion which are utilized in hollow particle board manufacture.
分析了传统拉拔退火法和连续挤压法生产铜扁线的组织。
The microstructure for copper strip produced by traditional drawing anneals method and continuous extrusion method are analyzed.
挤压法和乳化法是适用于发酵乳制品中益生菌包囊的两种技术。
There are two techniques, namely extrusion and emulsion to encapsulate the probiotic for fermented dairy products.
介绍了挤压法处理筛渣的主体设备工作原理、生产流程和经济效益。
Working principle of the extruding machine, production process and the profits from the use of extruding process are introduced.
综述等通道转角挤压法研究和应用现状，同时展望该方法的应用前景。
In the mean time, the research and application of ECAE technique are reviewed, and the perspectives of the technique are...
采用冷粘结挤压法，研制了一种工艺性能良好的烧结型耐磨耐热堆焊焊条。
A new kind of the sintered wear-resisting and heat-resisting deposit welding rod which has perfect processing property is produced and studied by cold-cementing extrusion process.
卧式挤压法压制中空刨花板在技术上是可行的，并能克服立式挤压法装置上的固有缺点。
Suppression of horizontal extrusion hollow particle board is technically feasible, it overcomes the vertical extrusion of the inherent shortcomings of the device.
以海藻酸钠为壁材、氯化钙为不变剂，应用挤压法胜利的制备出嗜酸乳杆菌-海藻酸钠微胶囊。
Sodium alginate as wall material, calcium chloride as the stabilizer, using successfully prepared by extrusion of Lactobacillus acidophilus - alginate microcapsules.
传统的TP2铜管生产方法——挤压法是由连铸实心铸坯挤压成管坯，再经过拉拔加工成管材。
The extrusion process is a traditional method for the TP2 copper tubes, in which continuous casting solid billet is extruded to hollow tube billet firstly and then drawn to tube.
介绍当今国外挤压法生产重质纯碱的四种工艺流程，并对其中两类流程加以技术经济分析和评价。
This work introduces four process for dense soda ash production by extruding process currently used in China and foreign countries and the technology comparison.
本文简要叙述国外有关挤压法研制葡萄糖糖果的试验情况，以及所使用的原辅材料和有关试验配方等。
In this paper, the studies on extruding glucose confections abroad was introduced, the raw material and ingredients used in processing and experimental formula were also discussed.
简要介绍等通道转角挤压法(ECAE)的基本原理及通过该方法得到的有效应变量的主要影响因素。
The mechanism of Equal Channel Angular Extrusion (ECAE) is briefly introduced, the influential factors on effect strain obtained by severe plastic deformation are also presented.
介绍了国内外主要开发应用的冷成型法、热挤压法、离心铸造法和焊接法等内复合双金属复合管制造技术。
This article introduces inner compound metal pipe manufacturing technology of the cold forming method, heat extrusion method and centrifugal foundry method as well as welding method.
并介绍腐植酸与肥料的作用机理，挤压法生产有机无机复混肥的流程、设备、工艺条件及产品的企业标准。
The interaction mechanism between humic acid and fertilizer is discussed, the flow sheet, equipment, process parameters of extrusion technology and enterprise standard of product are presented.
挤压法是益生菌微胶囊化运用最普遍的一种办法，具有制备前提暖和，不会严重影被包埋菌体活性等长处。
Extrusion is a probiotic micro-capsules of the most widely used method, with moderate preparation conditions, will not seriously affect the advantages of being embedded cell activity.
综述了熔融挤压法的设备、特点、工艺过程、常用辅料及影响因素，并对其在工业药剂学上的应用进行了概述。
The equipments, processes, excipients in common use and influence factors as well as applications in pharmaceutical fields of the hot-melt extrusion technology are reviewed.
通过本研究，得出以下几点主要结论：(1)立式挤压法用于压制中空刨花板存在设备高大、动力消耗大、静曲强度低等缺点。
Following main conclusions are obtained: (1) Vertical extrusion has some disadvantages in suppressing tubular particleboard, such as tall equipment, huge power consumption and lower MOE.
该建筑制品可以是由轧辊和滑块挤压法形成的混凝土屋面瓦，在泥质瓦挤压机中挤压制成的泥质瓦，或者浇铸而成的混凝土屋面瓦。
The building product may be a concrete roof tile formed by a roller and slipper extrusion method, a clay tile made by pressing in a clay tile press, or a cast concrete roof tile.
也就是说，它在Face对象的法向量方向上进行挤压，创建一个3 - D图形。
That is, it creates a 3-d figure by extruding in the direction of the Face object's normal vector.
这个值可以为负，从而在Face对象的法向量的反方向上挤压。
This value can be negative to extrude in the direction opposite the Face object's normal vector.
应用挤压刮取涂片法与透明胶纸粘贴法对同一人群进行蠕形螨检查。
Squeezing method and cellophane tape method were used to detect nasal Demodex infection in the same population.
模拟结果表明所用有限体积法是有效的，可以为铝型材挤压的模具设计与工艺参数的选择提供理论指导。
The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.
方法：采用挤压涂片法和透明胶纸法。
Methods: Cellophane tapes were adopted with squeezing and smearing method.
本文根据铅的刚塑性本构关系，利用均匀塑性变形能法，推导了铅挤压阻尼器的阻尼力滞回模型。
Based on the rigid plastic constitutive equation of lead, the damping force model of lead extrusion damper was deduced from the even plastic deformation energy method.
通过液淬法获得挤压比为40的AZ91D镁合金等温处理过程中的半固态组织，研究其球化机制。
Microstructural spheroidization of extruded AZ91D magnesium alloys with a high extrusion ratio of 40 was investigated at semisolid state.
通过液淬法获得挤压比为40的AZ91D镁合金等温处理过程中的半固态组织，研究其球化机制。
Microstructural spheroidization of extruded AZ91D magnesium alloys with a high extrusion ratio of 40 was investigated at semisolid state.
应用推荐