本文就双杯形件挤压成形工艺进行了研究。
The paper makes some studies on extrusion forming technology of two-cup part.
探讨自行车飞壳内棘齿的冷挤压成形问题。
The problem of cold extrusion for inner ratchets of bicycle's flywheel was discussed.
内螺纹冷挤压成形是提高内螺纹疲劳强度的有效方法。
Cold form tapping process is an effective method to enhance fatigue strength of internal thread.
黄铜合金连续挤压成形实验验证了数值模拟分析结果。
The numerical simulation analysis was verified by the continuous extrusion experiment.
对精密齿轮的冷挤压成形分析、成形方法进行了概述。
This paper studies and discusses the forming analysis and forming method of cold extrusion for precision gear.
采用冷挤压成形，可使成本降低、提高质量、使用可靠。
Using cold extruding technology can improve quality of spline shafts and decrease the production costs.
分析了偏心凸轮轴的成形特点，制定了零件挤压成形工序。
The forming characters of the eccentric camshaft was analyzed, the working procedures of extrusion for the part was provided.
秸秆螺旋挤压成形机理比较复杂，系统模型难以进行描述。
The spiral extrusion for corps straw is comparably complicated, and the modeling of system is very difficult to describe.
本文对径向挤压成形的汽轮机静叶片进行了精压工艺研究。
In this paper, the coining of turbine static-blade formed by lateral extrusion is researched.
生物杀灭剂是小球状或粉末状和其它成分混合，并挤压成形。
Biocides as pellets or powder are mixed with other ingredients, compounded, and extruded into shapes.
针对进行连续挤压成形系统有限元分析所需的理论基础做了说明。
Explain the basic theory that will be used in analyzing the continuous extrusion deformation system FEM method.
喷油器体因形状所致，其挤压成形无法采用传统的整体凹模结构。
The conventional structure of a entire concave die is not applicable for extrusion of fuel injector bodies because of shape of fuel injector bodies.
针对某异形轴结构特点，提出了一种新型多向加载挤压成形工艺。
In view of the construction feature of abnormal-axes, a kind of new multi-direction load press forming technology was proposed.
针对某异形轴结构特点，提出了一种新型多向加载挤压成形工艺。
The multi-direction load working procedure for abnormal-axes was optimized, the two sets of dies were designed and produced.
挤压后的零件不易脱模是多台阶空心零件在挤压成形工艺中的难点。
The forming of hollow steps shaped part by the extrusion forming process is a difficult problem.
对镁合金管件挤压成形工艺进行了实验研究，确定了其成形工艺参数。
The forming process of magnesium alloy extrusion tubes was researched, the forming parameters were determined.
采用冷挤压成形工艺方法，能生产出各种尺寸、规格的深圆锥形管件。
In this paper, we study the technique of cold extruding forming, and produced all kinds of the long conical pipe in that way.
结合非对称锥形壳体零件，研究了镁合金材料MB2的热挤压成形工艺。
The hot extrusion process of magnesium alloy MB2 material with the asymmetric casing forgings has been studied in the paper.
分析了亚共晶高铬铸铁半固态浆料进行流变挤压成形后挤压件的力学性能。
The mechanical property of the hypoeutectic high chromium cast iron extrusion samples was analyzed after extruded by semi-solid rheocasting forming.
介绍了用于金属冷挤压成形的三维操作机器人的工作过程、结构与控制系统。
The working process, structure and control system of a three-dimensional manipulating robot for cold extrusion forming of metal have been introduced.
采用包套挤压成形方法，成功地实现了不锈钢与半固态铝合金的连接与成形。
By using sheathed extrusion technique, the bonding and forming of stainless steel and semi solid aluminum alloy are successfully realized.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
锌基合金（ZA22，ZA27）可以挤压和轧制成形，但挤压成形塑性偏低。
Zinc-based alloys(ZA22, ZA27) may be formed by rolling and extrusion but with lower plasticity after extruding.
本文论述了锥台形空心件挤压成形工艺和模具设计要点，给出了实用的模具结构。
A dissertation is made on the process and main points of the die design for extruding the hollow parts of the frustum type.
当杆的断面收缩率比杯形部分断面收缩率大得较多时，不适合直接用复合挤压成形。
When the shrinkage of the rod fracture surface much more than that of the cup part fracture surface, its formation by compound extrusion is not applicable.
在半固态挤压成形过程中，随着成形温度的升高，镁合金半固态浆料的流变性改善。
With the rise of temperature in squeeze process, the Theological property of semi-solid magnesium alloy slurry was improved.
这个标准涵盖用于注模和挤压成形的PP(聚丙烯)塑料材料的聚合体含量和物理性能。
This standard covers the polymeric content and physical characteristics of PP (polypropylene) plastic materials for injection molding and extrusion.
分析了高压开关零件LW8 - 35sf 6铝合金拉杆的热挤压成形工艺及模具设计。
The hot extruding forming technology and die design of high-voltage switch component LW8-35SF6 aluminum alloy pull-rod are analyzed.
作为连续挤压成形零件的模具、挤压轮及堵头所受的成形力分析是其进行结构设计的关键。
As the important parts of continuous extrusion forming, validation of forming load on tool and die is the key of their design.
作为连续挤压成形零件的模具、挤压轮及堵头所受的成形力分析是其进行结构设计的关键。
As the important parts of continuous extrusion forming, validation of forming load on tool and die is the key of their design.
应用推荐