涂膜机采用平膜挤出法生产各种复合布。
Scribble membrane machine adopts flat membrane pushing out method to produce various compound cloths.
采用反应挤出法对EPDM进行动态硫化。
本工作研究了PFSIEM挤出加工技术:熔融挤出法和凝胶挤出法。
In this work, we researched extrusion processing technology of PFSIEMs, including melt-extrusion and gel-extrusion.
反应挤出法是物理改性一种,作为一种新技术,在淀粉改性中有很多优点。
The reactive extrusion is one of the physical modify, it has many merits as a new technology of starch modification.
结果表明,双螺杆挤出法制备的凝胶拉伸强度高于溶液浇铸法所得样品的拉伸强度。
It is obtained that, firstly, the PVA hydrogels by extrusion have higher tensile strength than PVA hydrogels by the solution casting method.
挤出法较压延生产的宽幅胶片既有致密性强、无气孔等优点,并可实现大规模连续化生产。
The wide range sheeting rubber made by extruder method has the advantage of high density and no air hole compared with calendaring method. It is suitable for large continuous process.
介绍了利用塑料挤出法生产人工滑草草坪的生产工艺,探讨了人工草皮和固定网的挤出模具设计。
The technological process of artificial skiing lawn by plastic extrusion method was introduced. The extrusion die design of artificial lawn was also discussed.
微孔发泡材料的制备大体上可分为间歇法、注射成型法和连续挤出法,各种方法各有其优点和适用的领域。
Microcellular foams can be produced by batch foaming, microcellular injection molding and microcellular continuous extrusion, each method has its advantages and scope of application.
通过反应挤出法对聚丙烯(PP)进行硅烷接枝交联改性获得高熔体强度PP(HMSPP),并对HMSPP的发泡性能及影响因素进行了研究。
The producing methods of HMSPP were discussed, including direct polymerization, radiation grafting and cross-linking, silane grafting and cross-linking, and so on.
通过凝胶含量测定、力学性能试验以及熔体流动性能测试等手段,研究了共混(反应)时间对密炼法和挤出法反应性PP/EPDM共混合金性能的影响及其机理。
The effect of blending time on the properties of reactive PP/EPDM alloy was studied via the analysis of gel content, mechanical properties, melt flow behaviour and morphology.
许多国家都对水力破裂法的安全性表示担心,这种技术是把高压液体注入页岩致岩石破裂从而挤出其中存储的天然气。
Concerns have been raised in many countries about the safety of fracking, a technique in which high-pressure fluids are pumped into shale to fracture the rock and force out natural gas.
以均聚pp为主要原料,共聚pp、HDPE、SBS为改性剂,用挤出共混法研制蓄电池用共混改性PP塑料。
Blending modified PP for accumulator was developed by extrusion blending, with PP homopolymer as basic material, PP copolymer, HDPE and SBS as modifiers.
挤出共混法通过熔融混炼聚合物和纳米微粒可加工成稳定的纳米复合材料。
Extrusion blending method can process a stable nanometer compounding material through melt-mixing polymer and nanometer particle.
介绍了以超有光聚酯切片为原料,采用熔体狭缝挤出成型技术和高速纺丝牵伸一步法工艺制取异形pet纤维的生产方法。
The bright profiled PET can be produced by the forming technology extruded from the spinneret slit and high-speed spinning-drawing with bright polyester chips.
膨胀挤出模塑,采用该法的挤出模塑装置,及用于制备压敏粘合剂片材的方法。
Expansion extrusion molding, extrusion molding apparatus therefor, and process for producing pressure-sensitive adhesive sheet.
本文首次成功地将压力不连续的非协调单元和罚函数法用于挤出胀大流动的有限元计算。
The problems of creeping flow of Newtonian fluid extruded from a plane slit or a circular pipe are simulated using several kinds of finite element method.
基于挤出-滚圆法研制了一种新型球形微丸造粒机,可广泛用于制药、化工、食品等行业。
Based on extrusion-spheronization method, a novel spherical pellet granulator widely used in pharmacy, chemical, food industry, etc. is developed.
基于挤出-滚圆法研制了一种新型球形微丸造粒机,可广泛用于制药、化工、食品等行业。
Based on extrusion-spheronization method, a novel spherical pellet granulator widely used in pharmacy, chemical, food industry, etc.
在单因素试验的基础上,利用响应面分析法对影响热塑性淀粉挤出膨胀率的因素进行优化。
The factors that affected extrusion swell of thermoplastic starch were optimized by response surface based on the single factor experiment.
本课题主要研究了用一步法化学交联挤出发泡工艺成型PP发泡材料的原理、配方、工艺条件及其成型装置的组合与优化。
In the study, the theory, formula, technology and combination and optimization of apparatus for the crosslinked pp extruding foam in one-step were discussed.
该法使用的挤出机,具有机头结构简单、价廉、占地面积小,挤出物质量好等优点。
The extruder used for this process features simple head structure, low price I less space and quality extrudate.
研究了采用挤出吹塑法成型聚氟乙烯薄膜的工艺;并结合制品性能,详细讨论了吹塑工艺参数的优化。
The processing technology of blow-molded PVF film was studied, and based on the property of the prepared product, the optimization of the processing parameters were discussed in detail.
将岩石力学中的研究方法———离散单元法引入塑料挤出固体输送研究中,并建立了固体输送段的离散输送模型。
This paper introduced the discrete Element Method which was used in rock mechanics into the research of polymer extruder's solid-conveying zone, and set up a discrete transport model.
本文利用有限元法对塑料管材的挤出进行模拟。主要讨论了影响塑料管材挤熔接痕形成的因素,以及管子冷却过程的热传递。
This essay described the FEM simulation of plastic pipe extrusion: the factors of melt line formation and heat transfer of cooling processing were mainly discussed.
本文介绍了生产塑料光导纤维的一种简单、易行、实用的挤出-涂复工艺法,并对该工艺中的技术关键一一作了说明。
A simple and convenient extrusion-coating process for producing plastic optical fibers and its know-how have been introduced in this paper.
高黏度物料在双螺杆挤出机中的流动情况非常复杂,很难用解析法求解。
The flow of high viscosity material is very complex, so it is difficult to be solved by the method of analysis.
在本研究中,我们提出了一种新颖的一步法:马来酸酐化和反应性掺混可以在一台双螺杆挤出机里同时进行。
In this study, we proposed a novel one step method in which maleation and reactive blending occur simultaneously in a twin screw extruder.
微孔塑料的成型方法主要包括间歇成型法、连续挤出成型法、注射成型法和相分离法等,并且各有优缺点。
The forming methods of microcellular plastics include batch microcellular foaming, continuous extrusion, injection molding and phase separation.
抗静电脚轮的制备方法可以采用挤出机挤出或注塑机注塑的方法。
The method for preparing the antistatic caster wheel can adopt an extruding method by an extruder or an injection molding method by an injection molding machine.
抗静电脚轮的制备方法可以采用挤出机挤出或注塑机注塑的方法。
The method for preparing the antistatic caster wheel can adopt an extruding method by an extruder or an injection molding method by an injection molding machine.
应用推荐