温度降低时，熔体黏度大，机头压力增加，挤出制品压的较密实，形状稳定性好。
The head pressure increases when the melt viscosity and temperature decreases, so the products will have good shape and favorable stability.
嘉善嘉旺塑料型材有限公司是一家专业从事塑料挤出制品的开发、生产与销售的综合性高新技术企业。
Jiashan Jiawang Plasitc Profile co., Ltd. is a professional new high-tech corporation dedicated in plastic extrusion development, production and sales.
聚合物精密挤出加工过程中，通常以在线检测的挤出流量为基准调节主机或牵引机转速等来提高挤出制品精度。
In polymer precise-extrusion, the on-line measured extrusion flux is often the basis to regulate screw-engine rotation or tractor speed to improve product-precision.
设置，操作，并看管用于混炼，压延，挤出，成型和硫化橡胶材料或橡胶制品的机械。
Set up, operate and tend machinery used for mixing, calendering, extruding, moulding and curing rubber materials or rubber products.
塑料加工机器操作员设置和操作塑炼，压延，挤出，用于制造塑料零件和塑料制品的成型加工机。
Plastics processing machine operators set up and operate plastic mixing, calendering, extruding and moulding processing machines used in the manufacture of plastic parts and plastic products.
结果表明为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。
The results showed to produce product with perfect appearance and property, modifications of screw, processing parameter, parison design and stretch ratio should be made.
应用它可以增加挤出机产量，提高制品精度，降低能耗和节约原材料。
It could increase the output, improve the accuracy of products, save energy and reduce the raw material.
综上，我们得出：选择较低的挤出温度及较高的螺杆转速有利于得到性能较好的低发泡制品。
Therefore, lower extrusion temperature and higher screw revolution speed will leads to low foamed HIPS products with good performance.
塑料异型材挤出模是塑料异型材生产的关键技术设备之一，直接决定着型材制品的质量和生产周期。
The extrusion die for plastic profile is the key equipment of its production, and has a great effect on the quality and the production circle.
挤出是聚合物加工的一种重要成型方法，塑料制品中40%是通过挤出加工成型。
Extrusion is one of the basic methods in polymer processing. More than 40% of plastic products are produced through extrusion.
研制了适于加工UHMWPE管材、棒材及异型材等制品的柱塞式挤出机。
The plunger extruder is developed for suiting to process UHMWPE pipes, rods and profiles, etc.
研究了采用挤出吹塑法成型聚氟乙烯薄膜的工艺；并结合制品性能，详细讨论了吹塑工艺参数的优化。
The processing technology of blow-molded PVF film was studied, and based on the property of the prepared product, the optimization of the processing parameters were discussed in detail.
本系列产品广泛应用与各种PVC发泡管、发泡板等挤出低发泡制品。
This series of products a re widely used for extrusion foam products, such as PVC foam pipes foaming board elc.
结果表明，为了得到理想的制品外观和性能，需要对挤出螺杆、加工工艺参数、型坯设计和拉伸比进行改进。
The results show that the optimal bottle performance requires modified screw, processing parameter, parison design and stretch ratio.
介绍使用小型挤出吹塑机生产改性PET医用吹塑瓶的工艺条件，列举并探讨了影响其制品质量的各种因素及采取的相应对策。
The process in the production of modified medical PET bottles by means of a small extrusion blow moulding machine was introduced.
主要和塑料挤出机配套，用于塑料pvc、PE、PC管材、异型材等各种塑料制品的自动生产线。
It is auxiliary to plastic extruder, used for automatic production line of all kinds of plastic products of plastic PVC, PE, PC tubular material, different shaped material.
在实验的基础上，探讨了成型工艺对挤出吹塑制品质量的影响。
The effect of the extrusion blow molding conditions on the part quality was summarized based on experiments.
在挤出吹塑过程中，冷却和固化是一个非常重要的阶段，它对挤出吹塑制品的性能及生产效率均有很大影响。
The cooling and solidification of part are very important steps in extrusion-blow molding, which affect greatly both the properties and productivity of the blown parts.
挤出成型在各种陶瓷成型工艺中被认为是最合适生产等截面制品的低成本工艺。
Out of many ceramic fabrication techniques, extrusion moulding is considered to be the most suitable method for producing a variety of shapes with constant cross-section.
作者认为螺旋芯棒机头是解决熔接线提高制品质量的较好办法，应推广到管材挤出生产中去。
The author holds that the use of spiral mandrel die is a good method to eliminate the fusion jointing line to improve the product quality, and it should be adopted in the p…
用于挤出生产各类耐热制品，如热水管材、耐腐蚀管材，电气管道等。
For various types of heat extrusion products, such as hot water pipes, corrosion-resistant pipes, electrical pipes and so on.
该谷类制品在溶液中所具有的粘度至少与挤出蒸煮前的谷类制品组分所具有的粘度一样大。
The cereal product in solution providing a viscosity at least as great as the viscosity provided by the components of the cereal product prior to being extrusion cooked.
论述聚碳酸酯挤出吹塑成型工艺控制及成型过程中制品产生缺陷的解决办法，介绍了挤出吹塑饮料瓶的成型工艺。
The paper relates to the extruding and blowing moulding technology of PC and the methods of solving problems arising during moulding. The technology of extruding and blowing PC bottle is introduced.
中心入料，多型式的挤出模头，彻底清除制品汇合线，满足各种结构制品的要求。
The centre enters the material, the pushing out of the mould head of many patterns, remove and make and converge the line completely, meet the demands of different structure products.
中心入料，多型式的挤出模头，彻底清除制品汇合线，满足各种结构制品的要求。
The centre enters the material, the pushing out of the mould head of many patterns, remove and make and converge the line completely, meet the demands of different structure products.
应用推荐