运行时间的不同,意味着纤维,进而是结构部件受到了拉伸或挤压。
Differences in travel time mean the fiber, and thus the structural element, is being stretched or compressed.
推挽式是一种有张力拉伸的环状结构。
在所有对身体柔韧性有制衡的结构部件中,筋膜是唯一可以放心去拉伸的。
Of all the structural components of your body which limit your flexibility, it is the only one that you can stretch safely.
在拉伸顺眼,同时增加了新的层面,您现有的结构创造这样的结果。
This results in a tensile creation pleasing to the eye whilst adding a new dimension to your existing structure.
蠕虫受刺激时,肌纤维结构蛋白被拉伸,其连接弹簧也被拉伸,蠕虫的荧光颜色发生改变。
When the worm is prodded, stretching the structural proteins in muscle fibers, the linking spring is stretched, and the worm fluoresces in a different color.
白色的拉伸织物覆盖了结构体,但是在下面留了巨大的开口,暴露出竹子的结构。
A white tensile fabric stretched over the structure, but left a large opening on the underside revealing the bamboo structure.
介绍无机填料结构形态对MPPO拉伸性能的影响并进行了理论分析。
The influence of the structural morphology of inorganic filler on MPPO tensile property is introduced and its theory analysis is made.
NOC通过用鼻腔调整压力,在喷气孔拉伸一对类唇结构而发出“人”声。
NOC made these 'human' sounds by tweaking the pressures in his nasal cavity, and stretching a pair of vibrating lip-like structures within his blowhole.
本文提出了拉伸煤盆地最一般的沉积—构造模式,并用以解释盆地结构的演化和泥炭聚积的条件。
A generalized sedimentary-tectonic model for extensional coal basin is presented, together with the explanation for the evolution of basin architecture and the conditions of peat accumulation.
纺丝过程中纤维皮层结构受到更大的拉伸取向作用,并在纤维表面出现一定游离原纤化结构。
A certain degree of free fibrillar structure was observed on the fiber surface due to the sheath structure of the fiber subjected to the greater drawing and orientation.
简单介绍了树脂拉伸模具的结构、材料和制造工艺。
The structure material and manufacture technology of resin drawing die are introduced?
采用显微观察、拉伸和弯曲等力学测试方法,研究了竹材的微观结构和力学特性的关系。
The microstructure of bamboo was investigated and correlated with the mechanical properties of this material under tensile and flexural stresses.
对壳体的冲压工艺进行了分析,介绍了拉伸、切边模具结构设计的要点。
Analyzed the pressing process of the shell part, introduced the structure design points of drawing-trimming die.
应用透射电子显微术研究低碳及中碳合金钢回火马氏体的形变位错结构随拉伸加载过程的演变。
The evolution of deformation dislocation structure during the tensile loading was examined by transmission electron microscopy in the tempered martensite of low and middle carbon alloy steels.
研究几种二元多相共混物的拉伸强度与组分的结构、界面区相容性、共混组成的关系。
The present investigation deals with the relationship of tensile strength with components structure, interfacial compatibility and blend composition.
测试了固化后的聚氨酯胶粘剂胶片的性能,讨论了分子结构对拉伸强度和伸长率的影响。
The effect of molecular structure of polyurethane on tensile strength and percentage elongation were evaluated by measuring the mechanical properties of the cured resin films.
对硬质合金拉伸凹模结构及设计要点作了详细介绍,对同类型模具设计提供了参考。
The structure and design points of hard alloy drawing combination concave die were introduced in detail and provided the reference to the similar die design.
狗股动脉拉伸后顺应性变化的出现较形态结构变化早。
The changes of compliance of canine femoral arteries after stretching occurred earlier than the changes of structures.
介绍了自行研制开发的液压拉伸矫直机的原理、结构特点及技术参数。
The principle, structure characteristic and technical parameters of the self-developed hydraulic stretching straightener have been described in this article in detail.
使用SEM、EDX分析了界面微观结构,通过拉伸试验对接头力学性能进行了评定。
The interface microstructure is analyzed by SEM and EDX. The mechanical properties of the joint is evaluated through tensile tests.
介绍了用于单动压力机的新型恒压边力落料拉伸复合模的结构及主要设计参数和模具工作过程。
The structure, main design parameters and work process of the compound die installed on single action press and working for blanking and drawing with constant blank holder pressure were presented.
探讨了拉伸工艺对高强PVA纤维结构和性能的影响。
The effect of drawing process on the structure and properties of high-strength PVA fiber was discussed.
利用虚功原理,建立了单面粘贴有压电致动器的梁结构的拉伸-弯曲耦合模型,在分析过程中,考虑了梁与致动器之间粘贴层的影响。
In this paper, the tension bending coupling model is presented by virtual work principle, the effect of the bonding layer between beam and piezoelectric actuator is considered in the analysis.
本文介绍纺织结构复合材料在剪切、压缩、拉伸和弯曲情况下的破坏机理,分析其特点和存在的问题,提出了发展趋向。
This paper describes the failure mechanisms based on shear, compression, tension and flexure, analyzes characteristics and problems of those models and then discusses the future trend.
采用低速纺丝高倍后拉伸的工艺路线可以得到具有较好结构的PGA纤维。
The fairly good structure of PGA fiber can be obtained at low spinning velocity and high after-drawing ratio.
本文对悬膜空间结构的一种破坏模式——膜的塑性拉伸失稳破坏进行探讨。
This paper investigates one of the failure modes of suspension membrane structures-plastic tensile collapse of the membrane.
利用小角X光散射(SAXS)、广角X射线衍射(WAXD)及拉曼光谱等测试手段,研究了拉伸过程中UHMWPE纤维的结晶结构变化。
The change of the crystalline structure of UHMWPE fiber was studied by small angle X-ray scattering (SAXS) , wide angle X-ray diffraction ( WAXD) and Raman spectroscopy.
通过改进拉伸凸模结构,提高球面轴承座模具加工质量。
Through improving the punch structure, improved the spherical surface bearing housing die machining quality.
主要介绍了不锈钢球形响壶盖的落料、拉伸、挤边复合模的详细结构、模具工作过程、工艺分析。
Mainly introduced the detailed structure and working process and the technology analysis of the blanking-drawing-extruding compound die for the stainless steel whistle pot cover.
分析喷丝头拉伸比对纤维的聚集态结构及性能的影响。
And also effect of spinneret draw-ratio on fibre aggregated structure and the properties was discussed.
应用推荐