白色的拉伸织物覆盖了结构体，但是在下面留了巨大的开口，暴露出竹子的结构。
A white tensile fabric stretched over the structure, but left a large opening on the underside revealing the bamboo structure.
织物传送带。全厚度拉伸试验。第1部分：拉伸强度、断裂伸长率和标准负荷下伸长率的测定。
Textile conveyor belts - Full thickness tensile testing - Part 1: determination of tensile strength, elongation at break and elongation at the reference load.
织物输送带是由不同的层，其中拉伸强度是由化纤织物铺层提供。
Fabric conveyor belts are made of various layers, where the tensile strength is provided by synthetic fabric plies.
测试和分析了这种织物的拉伸性能。
结果表明，复合材料的变形性能与增强纤维的含量，织物的组织结构及参数，拉伸方向等因素有关。
The experiment results indicate the deformation properties of composites are affected by fiber volume fraction, fabric structure and parameter, tensile direction etc.
选择适当的温度和拉伸比进行热定形，可提高PTT织物的断裂强力和弹性回复率，但其延伸性变差。
The breaking strength and resilient-elasticity recovery of PTT fabric can be increased under suitable temperature and drawing ratio during heat setting, but its dilatability took worse.
分析了增强织物的取向、组织结构、线圈形态、几何与结构参数等因素对拉伸与弯曲性能的影响。
The effects of fabric orientation, stitch structure, loop shape and geometrical parameters on the tensile and flexural properties are analyzed.
类似织物外观材料通过在框架的拉伸中创造出一种非常特别的效果。
Fabric has been stretched across the 'constructivpila' system from both sides to create a very special effect.
利用安装在拉伸试验机上的像框剪切装置，研究了平纹预浸碳纤维机织织物的剪切行为。
The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is (installed) on a mechanical test machine.
本文主要探讨了机织物在各个方向承受单向拉伸载荷、双向拉伸载荷及弯曲载荷时的力学性能。
This paper has mainly discussed the mechanical properties of woven fabrics in different directions under uniaxial stretching biaxial stretching and bending loads.
PTT与大豆蛋白纤维交织可以提高织物的断裂强力和拉伸回复率；
As to the fabric interlaced with PTT, it has less shrinkage, which decrease with the increasing of content of PTT.
根据针刺复合织物结构，分析其在拉伸过程中的内部应力场，说明拉伸应力应变预测计算的困难。
The stress field in the composite fabric which made by needle punching during tensile test, and the difficulty of calculating the stress - strain property are analyzed from the fabric structure.
第一章综合论述了大豆蛋白纤维研究的国内外状况，以及简要介绍了大豆蛋白纤维织物在尺寸稳定性、拉伸性能、弹性等方面的一些相关理论。
The first chapter summarizes the research condition at home and abroad, and introduces some theory correlation to the dimension property, stretching property, elasticity of spandex fabric etc.
研究了两种不同预混法对织物预型件和复合材料浸润效果、拉伸性能和剥离性能的影响；
The effects of different premix technique on the effective infiltration, tensile and peeling properties of thermoplastic performs and composites were investigated.
实验研究了不同铺层厚度的二维机织玻璃纤维织物/环氧胶膜基体复合材料层压板室温和湿热环境下的开孔拉伸和弯曲性能。
Flexural strength and open-hole tensile strength of glass-fiber woven reinforcement epoxy laminates is investigated experimentally at room temperature and hygrothermal environment.
得出了在不同拉伸速度和边框长度条件下装置处于准静态时的临界剪切角，并且分析了织物试样尺寸大小对准静态范围的影响。
The critical shear Angle of quasi-static state was given under different loading speeds and frame lengths condition, and the influence of specimen size on this shear Angle range is also discussed.
脆弱生丝经柔软剂处理后，能显著改善其表面结构与性能，并提高脆弱丝的织造性能和织物拉伸性能。
After softer treatment, the surface structure and properties of the brittle silk have been greatly improved, by which the weaving and tensile properties can be enhanced.
各种织物必须经过拉伸强力试验才能确定产品力学性能。
The mechanic property of fabric can only be determined by pulling strength test.
研究以涤纶经编多轴向织物为基布、表面复合聚氯乙烯压延薄膜制成的新型可作膜结构材料使用的织物增强柔性复合材料的拉伸性能。
This paper discussed a new coated fabric used for membrane, which is made by multi axial warp-knitted fabric of the PET fiber reinforcing PVC sheets.
着重讨论涂层工艺对织物拉伸和撕裂性能的影响，并优化了涂层工艺。
The emphasis is laid on the coating technology's effect upon the mechanical properties with the coating technology optimized.
研究得出，进口毛织物的手感特征依次为纬向拉伸弹性、厚实性、硬挺性、经向拉伸弹性和尺寸稳定性；
The evaluation index of foreign wool fabric in turn is weft tensile elastic, think and heavy performance, stiffness, warp tensile elastic, and size stability;
本文介绍了LFY-25型织物强力机自动控制织物断裂拉伸时间的方法。
The measures for controlling the breaking time on fabric strength. testing machine typeLFY-25 is introduced in this article.
在编织纱中掺入PGA纤维，可显著提高三维编织物的最大拉伸裁荷；
The ultimate tensile load of the 3D braid increases significantly by incorporating PGA fibers into the braiding yarn.
织物伸长计，用途：可简单、经济地检测针织及机织物的拉伸及回复性能。
To simply and economically determine the stretch and recovery of textile fabrics, both knitted and woven.
用于织物的抗拉伸断裂强力及断裂伸长的测定。
Model YG 026T Electronic Table Fabric Strength Tester is used for testing the breaking strength and breaking elongation.
用于织物的抗拉伸断裂强力及断裂伸长的测定。
Model YG 026T Electronic Table Fabric Strength Tester is used for testing the breaking strength and breaking elongation.
应用推荐