伊盟隆起地抽侧斜坡及中央古隆起四周斜坡地带,是寻找古生界天然气的有利场所;
The south slope of the northern Yimeng Uplift and the slope region around the central uplift are favorable for seeking Paleozoic natural gas.
本次设计的是DVD遥控器前盖塑料模具,制件的结构决定了该模具必须同时使用侧抽芯。
This remote controler front cover of DVD molding die must include special slide pull structure because the structure of the product.
将侧窗密封件放在定心孔上,然后用抽芯铆钉铆接侧窗密封件。
Position the side wind ow seal on the centering hole and rivet it down using the pop rivet.
我们经分析采用了斜导柱侧抽的方法,有效可靠的解决这个问题。
We analyzed the use of the oblique derivative method smoke side column, effective and reliable solution to this problem.
针对底层大开间组合墙房屋的特点,对模型房屋进行了子结构拟动力试验,测定其抗侧刚度,发现了抽柱对结构性能的重要影响。
In accordance with the characters of composite masonry structure building supported by frame shear wall with wide bay at bottom, a sub structure pseudo dynamic test was carried out.
论述了注射模具中薄型油压缸侧抽芯机构的特点以及可能发生的问题。
In this paper, the advantages and possible problems of the thin cylinder drawing core mechanism of injection moulds are discussed.
详细地叙述了模具成形零件的设计、液压侧抽芯机构、浇注系统和其他结构的设计过程,以及模具工作过程。
The design of its molding part was used in the mold, inject system and other make up, and working process of the mould are specified in detail.
细叶百合的鳞茎在生长发育过程中一年仅形成1个侧生小鳞茎,且此鳞茎是下一年唯一能抽生花茎、进行有性生殖的鳞茎。
The bulb only vegetate one little adnation bulb during growth in 1 year and the little adnation bulb is the only one which can flower.
在侧抽芯机构中设计出一种顶出机构,改善塑件的成型质量,防止塑件脱模时的变形。
An ejection system was designed in the side core_pulling mechanism to improve the moulding quality and avoid deformation of the plastic part during demoulding.
介绍大屏幕彩色电视机前壳注射模结构,重点介绍侧抽芯大滑块的设计, 顶出机构和进浇方法的改进。
The injection mold structure of the front shell of large screen color TV is introduced, and design of side core-pulling large slide, improvement of ejector mechanism and gating method are introduced.
本文对延时侧抽芯机构设计作了详细阐述,并模拟了模具的开合运动。
The design of the side core-pulling delay mechanism is stated in detail, The open-close action of the mould is simulated.
模具设计成斜导柱侧抽芯,利用复位杆复位,以顺利脱模。
The die with oblique side of guide pillar to take out core and release link was designed to take off mould smoothly.
该模具设计的难点是四个侧面都需要通过抽芯成型多个侧孔。
The difficulty in the mould design is how to form a number of apertures in four side face by side core-pulling mechanism.
模具设计的难点在于几个关键部位的抽芯,在此采用了斜导柱抽芯机构、和侧滑块抽芯机构等。
Difficulty lies in mold design several key parts of the core pulling, this USES a bevel pillar core-pulling mechanism, and side slider pulling mechanism and so on.
塑料制品的复杂化给成型模具的结构设计带来困难,对于特殊塑料制品采用原有的侧抽芯机构难以满足塑件的成型要求。
Designing injection moulds for complex construction of plastic parts is a challenge; here is an example where conventional side core-pulling mechanism is unable to meet the requirement of forming.
同时,在模具设计中,为增加适当的难度,选择了有侧抽心机构的产品下改进行模具设计制造。并且采用了活动镶件进行脱螺纹。
Its appropriate difficulty of increment to take off the thread organization to adopt the wheel gear and take off the thread method to give the realization.
在塑料模具设计中,设计一种延时脱开机构将机床动力由动模传递给定模,使定模顶出机构工作;在侧抽芯机构中设计出一种顶出机构,改善塑件的成型质量,防止塑件脱模时的变形。
In the design of the plastic mould, a latch_lock mechanism was designed to transfer the machine driving force from the moving half to the fixed half to make the ejection system of the fixed half work.
本设计为类似产品及侧抽芯塑料模具的设计提出了一条新思路。
A new way of the design for plastic mould with side core-pulling and the similar products I...
压铸件内凹处两侧采用液压抽芯机构抽芯,为防止滑块型芯与推杆发生干涉而设置了预复位机构;
Hydraulic drawing-core mechanism was adopted for two-side of inner-sinking in the die casting die, and pre-resetting mechanism was set to avoid the interference of core slide with ejector pin.
压铸件内凹处两侧采用液压抽芯机构抽芯,为防止滑块型芯与推杆发生干涉而设置了预复位机构;
Hydraulic drawing-core mechanism was adopted for two-side of inner-sinking in the die casting die, and pre-resetting mechanism was set to avoid the interference of core slide with ejector pin.
应用推荐