所提出抗震设计方法，更加准确地考虑了储罐的提离问题。
The seismic design method given in this paper truly takes into account the uplifting of the standing steel storage tanks.
最后提出了延性约束钢筋混凝土短梁的抗震设计方法建议。
Finally, some recommendations on aseismic design of short ductile restrained reinforced concrete beam have been put forward.
研究型钢混凝土节点的抗剪受力机理和节点抗震设计方法；
The shear mechanisms of SRC joints and seismic design method are studied;
对地下铁道开展建立抗震设计方法的研究正逐渐得到人们的关注。
To set up an. aseismic design method and its research for Metro project has won many concerns day by day .
桩基是处理液化地基的常用方法，但在抗震设计方法上尚未统一。
Pile foundation is an important measurement for improving liquefiable subsoils. Rainily the design methods in this field, published in seismic regulation and codes, are various.
直接基于位移的抗震设计方法是对基于力的抗震设计方法的重大改进。
The method of direct displacement-based seismic design is an important improvement on force-based seismic design.
相对于传统的抗震设计方法来说，它是一个全新概念的抗震设计方法。
It is a new concept method of seismic design according to traditional method.
提出了基于压杆模型和软化桁架模型的钢筋混凝土梁柱节点抗震设计方法。
A seismic resistant design method of reinforced concrete beam-column connections based on compression strut and softened truss models was proposed.
在建筑结构基于性能要求的抗震设计方法中，抗震措施是一个重要的组成部分。
The seismic measure is one major part of the seismic design based on the performance requirements of buileing structures.
结合我国抗震设计规范，提出被动耗能减震结构基于能力谱法的抗震设计方法。
A seismic design procedure for energy dissipation systems is proposed by using the capacity spectrum method in combination with Chinese seismic design code.
在建筑结构基于性能要求的抗震设计方法中，抗震措施是一个重要的组成部分。
The seismic measure is one major part of the seismic design based on the performance requirements of building structures.
传统的桥梁抗震设计方法，是依靠增加结构构件自身的强度、变形能力来抗震的。
The traditional method of the aseismic bridge design is to ensure the structure to have enough intensity and ductility to resist earthquake.
基于能量概念的抗震设计方法是改进目前常用结构抗震设计方法的重要途径之一。
The structural seismic design on energy concept is one of the important approaches to improve usual method.
从以上结果出发，本文提出了一个考虑地震中不同持续时间影响的抗震设计方法。
Then, a seismic design method considering the effect of strong ground motion duration is presented.
从以上结果出发，本文提出了一个考虑地震中不同持续时间影响的抗震设计方法。
Then, a seismic design method considering the effect of strong ground motion duration is pr…
在此基础上，根据我国现行的两阶段抗震设计方法，对结构进行罕遇地震下的性能分析。
On the basis, according to China's present two stages of seismic design method, the structure of the performance under severe earthquake is analyzed.
作为商住楼的底部二层框架—剪力墙、上部砌体结构的抗震设计方法，在规范中并无涉及。
As two bottom stories of frame shear wall in commercial building, the methods of anti earthquake design of upper laying structure were not dealed with in code.
介绍了结构抗震性能水准的划分、抗震性能目标的确定以及常用的基于性能的抗震设计方法。
Structural performance levels, performance objectives, and usual performance-based seismic design methods are introduced in this paper.
本文结合抗震设计规范反应谱，给出了一个附加非线性流体粘滞阻尼器结构的抗震设计方法。
This paper presents a seismic design method for existing buildings equipped with nonlinear fluid viscous dampers (FVD).
研究结果将为该类结构构件的地震损伤评估以及基于损伤的抗震设计方法的建立提供理论依据。
The study results will supply the theory support for the seismic damage assessment and the establishment of damage-based earthquake-resistant design method of SRHSHPC members.
本文介绍了日本钢板桩护岸抗震设计方法的观念，以及试验中钢板桩护岸在抗震性方面的表现。
This paper introduces a concept of recent seismic design method for steel sheet pile revetment in Japan, and seismic behavior obtained by an experiment for steel sheet pile revetment.
同时，精确的结陶弹塑性分析方法也为先进的抗震设计方法——性能抗震设计法创造了有利条件。
At the same time, precise structure elastic-plastic analysis method created advantage for the performance-based design method, an advanced aseismatic design method.
新颁布的桥梁抗震设计细则设计方法与国外的桥梁抗震设计方法已经比较接近，但需要进一步改进。
The design approach in new published criteria for seismic design of bridge is comparative in some aspect with abroad code, but more improvement is necessary.
一个压杆模型和软化桁架模型的基础上，本文提出了一种新的抗震设计方法钢纤维钢筋混凝土梁柱连接。
Based on a compression strut model and a softened truss model, this paper proposes a new seismic resistant design method of steel fiber reinforced concrete beam-column connections.
几十年来，先后诞生了拟静力方法、反应谱方法、时程分析方法、基于性能的设计方法等抗震设计方法。
For the recent decades, the pseudo static method, the response-spectrum analysis, time-history analysis, performance-based design method, spring out early or later.
在密肋复合墙板的损伤模型建立的基础上，对密肋复合墙体基于损伤性能目标的抗震设计方法进行了探讨。
On the basis of damage model of Multi-rib Wall, the paper discussed aseismic design method based on damage property.
依据所要达到的安全程度，可选择采用主动隔震结构控制技术、被动隔震结构控制技术或传统的抗震设计方法。
Depending on the degree of safety to achieve structural control technique like active isolation, passive isolation or conventional seismic design method can be chosen.
最后提出了基于性态的边坡抗震设计方法，包括边坡抗震性态水准的划分、性能指标的建立和抗震设计方法。
Finally, the performance-based seismic design method is proposed, including the classification of performance level of slopes, the definition of performance index and the seismic design method.
国内外学者对悬索桥的动力性能和抗震设计方法进行了大量的研究工作，悬索桥地震响应更是广泛关注的对象。
Plentiful studies are reported on the dynamic behaviors and the seismic design methods, and more focuses are on the seismic responses of suspension Bridges.
本文对基于性能的抗震设计方法中最具有代表性的直接基于位移的设计方法在剪力墙结构中的应用进行了研究。
In this paper, the application of direct displacement-based design method which is the most representative performance-based design method for the shear wall structure will be studied.
应用推荐