测定各组的抗扭强度和抗扭刚度。
滑块同步采用抗扭连杆和机械挡块机构；
The slide block is synchronized with anti torsion bar and mechanical block mechanism. ;
板梁 式门架，有较好的刚度和抗扭性能。
The seismic performance of flat plate structure can be improved by the spandrel beam.
双台肩钻具接头可大幅度提高钻具的抗扭强度。
The torsional strength of the drilling tools can be greatly increased by using the double shoulder tool joint.
利用斜支撑提高异型柱框架结构抗扭性能的研究。
Studies on improving the torsion resistance ability of special shape column frames using inclined supports.
的目的，新的设计是为了提供更多的横向和抗扭刚度。
The purpose of the new design is to provide increased lateral and torsional rigidity.
塔式起重机塔身的抗扭刚度与塔身腹杆布置密切相关。
Torsional stiffness of tower crane mast is closely related with the arrangement of Web members of the mast.
提出了组合梁弹性抗扭刚度计算公式和开裂扭矩计算公式；
The formulae about elastic torsion stiffness and cracking torque are presented.
考虑了筋的侧向抗弯刚度及在其平面内的抗弯刚度和抗扭刚度。
Taken the lateral flexural rigidity of stiffener, the flexural rigidity in its plane and the torsional rigidity into consideration.
抗风与抗扭是大跨度单索面斜拉桥结构分析中的两大关键问题。
Win and torsion resistances are two key points in the structural analysis of large -span monocable stayed Bridges.
通过改变桥台抗扭刚度和宽跨比，研究对斜交拱桥受力的影响。
The influence to stress of skew arch bridge was studied by changing the abutment torsional stiffness and width-span ratio.
配置模块化安装辅件，如专利的抗扭支架，导向轮组及缓冲器等。
Configuration of modular installation accessaries, such as patent torsional support, guide wheel, bumper, etc.
组合扁梁楼盖设计和施工时，应注意上述问题并采取抗扭构造措施。
Attention should be paid to above-mentioned problems and structural measures taken against the torsion in the design and construction of composite flat beam floors.
每个样本均采用循环轴向荷载以至固定失效来测定其轴向刚度和抗扭刚度。
Each specimen underwent axial and torsional stiffness testing along with cyclic axial loading to failure.
本文主要针对预应力混凝土曲线梁桥抗扭设计中的相关问题进行了分析计算。
This article mainly aimed at analyzing and calculating some problems related to the torsion design of curved prestressed concrete girder Bridges.
高层建筑箱形转换层具有应力分布合理和抗弯、抗剪、抗扭刚度大等结构特性。
The box transition storey of tall building has the characters of rational stress distribution and large stiffness of bending, shearing and torsion.
在其热塑塑料中独一无二的抗扭强度，使其成为小型钢制切削零件的廉价替代品。
In its thermoplastic unique the atb strength, make it become small steel cutting parts of cheap substitute.
按照材料各自用途不同，其必须具有足够的抗拉、抗压、抗剪、抗弯或是抗扭强度。
Material should be adequately strong when subjected to tension, compression, shear, bending or torsion as per the intended use.
另外，在折弯、抗扭强度相同时，重量较轻，所以也广泛用于制造机械零件和工程结构。
In addition, the utility model has the advantages of light weight and bending strength, and is widely used for manufacturing mechanical parts and engineering structures.
近年来，国内外对结构扭转性能与构件的抗扭性能进行了许多研究，并取得了有效成果。
Results show that eccentricity reduction can effectively weaken torsion effect and improve the structure of the seismic performance.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
In this paper, theoretical analyses on the torsional behavior of CFS strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
采用本发明增加了电气间隙，有效的防止了爬电现象的产生，加强了开关主轴的抗扭强度。
The ring network switch device increases the electric clearance, effectively prevents the occurrence of the creepage phenomenon and enhances the torsional strength of the switch principal axis.
对碳纤维布(CFS)加固的弯剪扭复合受力的钢筋混凝土箱梁的抗扭性能进行理论分析。
Experiments on the torsional behavior of carbon fiber sheet (CFS) strengthened reinforced concrete (rc) box beams subjected to combined action of bending-shear-torsion are performed.
为了保持结构的整体性能以及分配剪力和抗扭，输电塔的设计中都要设置一定间距的横隔面。
In order to maintain the global stability and to distribute shear and torsional forces, diaphragms with some intervals are required in designing transmission towers.
抗扭构件的刚度计算公式可应用于钢筋混凝土平板-异形柱板柱结构体系的等效柱理论分析。
The theory expression of transverse torsion member can be applied to equivalent column method to analyze the behavior of reinforced concrete flat plate-special-shaped column structural system.
通过钢纤维高强砼矩形截面构件的受扭试验，着重探讨了钢纤维对纯扭构件抗扭性能的影响。
The behavior of steel fiber high-strength concrete rectangular members subjected to pure torsion is studied.
通过钢纤维高强砼矩形截面构件的受扭试验，着重探讨了钢纤维对纯扭构件抗扭性能的影响。
The behavior of steel fiber high-strength concrete rectangular members subjected to pure torsion is studied.
应用推荐