放下锤子和螺丝刀，将套筒扳手放到螺母上拧动。
Put down the hammer and screwdriver, and place the socket over the nut and turn.
那么，放下锤子和螺丝刀，将套筒扳手放到螺母上拧动。
So, put down the hammer and screwdriver, and place the socket over the nut and turn.
成功使用套筒扳手的关键在于模式匹配：套筒扳手必须与螺母相匹配。
The key to success with a socket wrench is pattern matching: The socket must match the nut.
否则，您可能感觉到像用锤子一样使用一个套筒扳手来敲击螺丝刀手柄而拧开螺栓的螺母。
Otherwise, you might feel as if you are using a socket wrench as a hammer hitting the handle of a screw driver to loosen a nut and bolt.
双件套强力锁紧螺母安装简便，只需要一个扳手就行。
The two-piece Hard Lock Nut is easy to install, requiring only the use of a wrench.
你可以用扳手来松这个螺母。
这使得不用扳手，而是使用带手轮的螺母就可以进行连接。
This allows the connection to be made without a wrench, using a nut equipped with a hand wheel.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.
螺钉和螺母用装配工具。工程用双头开口扳手。扳手长度和端口厚度。
Assembly tools for screws and nuts - Double-headed open-ended engineers 'wrenches - Length of wrenches and thickness of the heads.
便携式手持动力工具。手柄部位振动量的测量。第7部分：具有冲击，冲力和棘轮传动动作的扳手，螺锥和螺母拧紧器。
Hand - held portable power tools. measurement of vibrations at the handle. part 7: wrenches, screwdrivers and nut runners with impact, impulse or ratchet action.
邯郸市通和紧固件制造有限公司，是一家专业生产火花塞配件、内爆膨胀螺丝、内迫壁虎、套筒扳手、螺母、扣件螺丝的专业公司。
Handan Tonghe Fastener manufacturing co. Ltd. is a company specialized in manufacturing fittings for spark plug, inner expansion bolts, drop-in anchor, socket wrench, nuts and screws.
你用板手固定住下面螺母，同时用另外一把扳手拧开上面螺母，你明白的意思吗？
You hold the lower nut with one spanner while you undo the top nut with another one - do you see what I mean?
你用板手固定住下面螺母，同时用另外一把扳手拧开上面螺母，你明白的意思吗？
You hold the lower nut with one spanner while you undo the top nut with another one-do you see what I mean?
在扳手的平面上握住阀杆(27)并拆卸螺母(51)，锁紧垫圈(46)，隔膜板(60)和隔膜。
Hold stem (27) on wrench flats and remove nut (51), lock washer (46), diaphragm plate (60) and diaphragm.
用扳手把螺母拧开。
扳手面上面的那个属于衬垫螺母，它是通过螺纹旋进阀体的。
The upper set of wrench flats belong to the packing nut, which is threaded into the valve body.
螺钉和螺母装配工具。双头开口扳手双头环形扳手和组合扳手。最大头部宽度。
Assembly tools for screws and nuts - double - headed open - ended wrenches, double - headed ring wrenches and combination wrenches - maximum widths of heads.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body.
螺钉和螺母装配工具。双头开口扳手双头环形扳手和组合扳手。最大头部宽度。
Assembly tool for screws and nuts - open - end double - head engineers wrenches, double - head box wrenches and combination wrenches - maximum outside dimensions of heads.
为了在每个螺母上获一至的压力，建议用扳手或相关的计量装置紧固螺母注意：此时装置如果处于无泄漏状态，可能引起盘根燃烧。
In order to be one on each nut to the pressure, it is recommended to use wrenches or nut fastening the measuring device Note: at this point if the device is leak-free state, may cause burning packing.
拉出前，先要开圆盘背面的圆螺母锁片，用钩形扳手拧下圆螺母，再用专用拉子将圆盘拉出。
Pull out before you want to open on the back of the circular disk lock plate with hooks, nut spanner remove round nut, reoccupy special pull the son will disc pull out.
螺钉和螺母用装配工具。双头平直和弯头套筒扳手。扳手长度和端口厚度。
Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.
用扳手抓住上部和下部阀杆锁紧螺母并且松开。
六角形的螺母，一次只需要把扳手扳动60度，就能够慢慢把螺母拧紧。
Six angular nuts, one time only need the spanner to move 60 degrees, can screw tight slowly the nut.
操作工须知：在启动设备前应先检查联轴器的螺母是否有松动或脱落，如有要及时将螺母用扳手把紧。
Operator Notes: The boot device should be preceded by checking whether the coupling nut loose or fall off, if in time to tighten the nut with the wrench.
操作工须知：在启动设备前应先检查联轴器的螺母是否有松动或脱落，如有要及时将螺母用扳手把紧。
Operator Notes: The boot device should be preceded by checking whether the coupling nut loose or fall off, if in time to tighten the nut with the wrench.
应用推荐