AKC系列动、静态扭矩传感器；
转盘所扭矩传感器接头容易被破坏。
实验证明，所设计的扭矩传感器能满足设计要求。
The experiment data proves that the sensor can satisfy the design requirement.
应用车轮扭矩传感器开发了轮胎滚动阻力测试系统。
Apply wheel torque sensor to develop the test system of tire rolling resistant force.
采用应变片式扭矩传感器，可靠性高，精度高，寿命长。
Adopt strain gauge type torque sensor, with high reliability, high accuracy and long life.
这种套式磁弹性扭矩传感器是基于磁弹性效应原理而研制的。
The transducer designed on a muff type is developed on the basis of magnetoelastic effect.
合理选择出压力传感器、扭矩传感器和电动扳手等关键部件；
Pressured sensor, torsional sensor and electric spanner were selected reasonably;
利用PC机、步进电机、高精度扭矩传感器组成的系统完成了刚度测量。
The measuring system USES PC, step motors and high accuracy torque sensor to finish the stiffness test.
针对水轮机主轴扭矩检测系统中的光栅扭矩传感器，设计了一种新型电路。
A new circuit used for the grating torque sensor of hydraulic turbine's principal axis system is designed.
本文分析讨论了轮辐式扭矩传感器的原理和精度，并用有限元计算和实验加以验证。
Principle and accuracy of the sensor are analysed and verified with finite element calculation and experiment.
代工产品包括扭矩传感器、加固计算机、标准机箱机柜、自动化生产流水线等产品。
OEM products include Torque Sensors, Reinforcement of Computer, Standard chassis, automated production line and other products.
IRT扭矩传感器可以以多种附载形式配置，可以膨胀同时测量扭矩和推力以及温度的输入。
The IRT torque sensor can be supplied in multiple attachment configurations, expandable to measure both torque and thrust simultaneously and also can include on-board temperature inputs.
驱动电机的输出轴通过相互串接的第一普通联轴器和第一柔性联轴器同扭矩传感器的输入轴连接。
The output axle of the driving motor is connected with the input axle of the torque sensor through a first normal coupling and a first flexible coupling connected in series.
扭矩传感器的输出轴通过相互串接的第二普通联轴器和第二柔性联轴器同连接构件的输入端连接。
The output axle of the torque sensor is connected with the input end of the connecting component through a second normal coupling and a second flexible coupling connected in series.
全文立足于CVT和其试验开发系统，重点介绍了用于CVT 的光电扭矩传感器系统的研制和试验。
Based on CVT and its test development system, the study and test ofthe optical-electronic torque sensor is given in this dissertation.
通过在冗余驱动分支上安装扭矩传感器实现力矩信号实时反馈，初步实现了该机床冗余驱动的柔顺控制。
Torque sensor is installed on the redundant actuation driving limb to realize real time feedback of torque signal, which realizes the compliance control of PMT primarily.
本文对在应用应变式扭矩传感器时由于在弹性轴上的弯矩而引起的误差进行了力学分析，并提出了消除的方法。
This paper analyzes the error of torque sensor of strain-resistor which derives from the influences of bending moment on elastic axis, and discusses the Eliminating techniques.
该传感器同其他石英扭矩传感器相比，突出特点是采用石英晶片的扭转效应而不是通常采用的剪切效应来建构的。
The outstanding features of the torque sensor contrary to other type of quartz torque sensor are: the torque sensor adopts torsion effect of quartz disc rather than shear effect.
光扭矩传感器的输出信号在进行光电转换过程中，由于温度影响，造成了直流电平漂移误差，影响系统的测量精度。
During the photoelectric conversion process of output signal from optical torque sensor, DC level drift error induced by temperature influence will affect the measuring accuracy of the system.
为确保扭矩的正确，扭矩传感器，扭矩测试仪表，扭矩工具等必须要严格标定，标定方法很多最基本的是用砝码，标准杠杆。
To ensure the correct torque, torque sensor, torque meter, torque tools must be strict calibration, calibration method of many of the most basic is used weights, standard lever.
本文基于一种常用的扭转试验机，采用了技术较为成熟的扭矩传感器，通过平衡力法测量扭矩，并采用光电编码器测量扭转角；
Torque is measured by equilibrant method in virtue of torque transducer and torsional angle is measured in virtue of photoelectric coder on conventional experimental machine.
针对目前录井现场各类在用扭矩传感器存在的安装方便性、精度、稳定性和耐用性差等不足，开发研制了新型夹持式扭矩传感器。
As for the disadvantages existed in the torque sensors, such as poor installation convenience, accuracy, stability and durability, the new holder type torque sensor was developed.
其中模拟横摇力矩的伺服系统采用齿轮齿条摆动液压油缸，并配有扭矩传感器，试验台架的转动惯量、阻尼力矩和恢复力矩均可调。
In which the rolling moment system adopts gear-rack swing hydraulic-pressure oil VAT with torque sensor, the moment of inertia, damp and comeback can be adjusted.
控制单元100根据通过角度传感器、扭矩传感器以及生物信号检测传感器检测到的物理量以及生物信 号，控制驱动单元11。
The control unit (100) controls the drive unit (11) according to the physical quantities and biosignal detected by an angle sensor, a torque sensor, and a biosignal sensor.
采用拉压力传感器作为扭矩测量元件，提高了测功器的测量精度。
Using the tension-compression sensor as a measuring element of torque, the measuring, precision of dynamometer was raised.
每种测试重复8次，通过MTS传感器记录外固定针各部位在不同轴向压力下所需扭矩、时间和位移。
Each testing were repeated 8 times, and the precise data (torque, time and displacement) of different group and different part were noted on the MTS sensor respectively.
开发了不用接触就能测得铣削扭矩的转矩传感器。
The torque sensor, which is capable of detecting the cutting torque without contact, is developed.
介绍了利用霍尔传感器测量扭矩的原理及在钻井作业转盘扭矩测量中的应用。
The principle of torque measurement by using Hall transducer and the application of torque measurement of rotary table in drilling jobs are introduced.
在他开始握传感器的瞬间，传感器就将应力化作动作器的扭矩。
The instant he starts to pull down that weighted bar, sensors in each of his hand-grips register changes in torque.
在他开始握传感器的瞬间，传感器就将应力化作动作器的扭矩。
The instant he starts to pull down that weighted bar, sensors in each of his hand-grips register changes in torque.
应用推荐