方法：采用OD O扫描电镜法和冷冻蚀刻法行电镜观察。
Methods: ODO scanning electron microscopy (ODO SEM) and freeze-etching techniques were adopted for the study.
采用石蜡组织切片和扫描电镜法，对齐口裂腹鱼卵巢发育进行了组织学研究。
By using the routine method of wax section and scanning electron microscope, the development of the ovary of Schizothorax prenanti was studied.
用扫描电镜法对整理后的织物表征，并测定整理后棉织物的阻燃性能和耐久性。
Treated cotton fabric was characterized by scanning electron microscopy, and their flame retardancy and durability were tested.
采用扫描电镜法(sem)、红外光谱法(FTIR)、差热扫描法(DSC)对PV A粉末、未交联pva纳米纤维膜以及交联PVA纳米纤维膜的形态和结构进行了研究。
SEM and FTIR as well as DSC techniques were employed to characterize the morphology and structure of crosslinking of PVA nanofibers membrane, PVA nanofibers membrane as well as PVA powder.
利用平板计数法、扫描电镜等实验研究了海洋细菌在三种水性聚氨酯防污涂层上的附着。
The adhesion of Marine bacteria on three antifouling coatings based on waterborne polyurethane was studied by using scanning electron microscope and Bactoscan FC.
方法：采用染料渗漏法和扫描电镜观察新型聚氨酯液体根充材料与根管壁之间的密合度及其对根尖孔的封闭能力。
Methods: To observe the gaps between material and the walls of canals by scanning electron microscope, the apical sealing ability of material by dye penetration method.
通过分析木材试样的扫描电镜照片，研究了木材横纹剖面的多孔结构特征，采用盒维数法计算了其分形维数。
The porous structure of wood samples on their cross sections was analyzed using scanning electron microscope images, and their box-counting dimensions were calculated.
利用扫描电镜技术、叶片离析方法和石蜡切片法对蚁花属1种和澄广花属9种植物叶的形态结构进行比较研究。
The leaf form and structure of 1 Mezzettiopsis species and 9 Orophea species were comparatively studied with the help of scanning electron microscope, epidermal maceration and paraffin section method.
通过汞压入法(mip)和扫描电镜(sem)等现代测试方法对矿渣油井水泥的水化硬化特性和机理进行了研究。
By modern test methods like mercury intrusion pore measurement (MIP) and scanning electron microscope (SEM), the hydration and hardening mechanism of the slag cement was analyzed.
产品通过X射线衍射(XRD)、扫描电镜(sem)、能谱仪(EDS)测试，说明块料直接煅烧法生产的方石英具有转化率高、加工性能好、成本低等特点。
By tests of XRD, SEM, EDS, this processing technology has the advantages of high transformation, good processing capability and lower pay out and so on.
借助光学显微镜、扫描电镜等手段，对用埋铸法生产的T9815气轮机组隔板断裂部位的金相组织特征，宏观和微观断口形貌等进行了研究。
The microstructure characteristics, macro and micro fracture morphology of brittle broken embedded casting closure of T9815 turbines were investigated by means of metallographical examination and SEM.
本文采用DMSO冷冻割断法，对植物样品内部微细结构进行了扫描电镜观察。
DMSO freeze-cracking method was applied for preparation of the scanning electron microscopic specimen of plants.
实验中，利用石蜡切片法和扫描电镜技术对愈伤组织的发生及细胞整体形貌进行了观察。
At the same time, the callus occurrence and cell configuration of the callus were observed via paraffin slice method and scanning electron microscope technology.
通过扫描电镜、MTT测试法、考马斯亮蓝和碱性磷酸酶活性检测法，观察去抗原异种松质骨材料对细胞生长、增殖及功能表达的影响。
SEM, MTT assay and alkaline phosphatase (ALP) activity were carried out to observe the effect of AEXCB on cell growth, proliferation and functional expression.
用XL 30feg扫描电镜对热丝化学气相沉积(HFCVD)法合成的金刚石颗粒的初期生长过程进行了研究。
The initial growth process of diamond grain synthesized by HFCVD method was investigated by using XL30FEG SEM.
方法：应用细胞计数法和扫描电镜观察法。
METHODS:Methods of cell count and scanning electron-microscopy were used.
本文在扫描电镜观测的基础上，运用气体吸附法和压汞法对郯庐断裂系南段糜棱岩和高级片麻岩的微孔隙结构参数进行了测试。
Based on SEM observance, the methods of gas adsorption and mercury pression were used to test micro hole frame parameters of mylonite and high grade gneiss in this paper.
采用动态力学谱（VES）、示差扫描量热（DSC）、透射电镜（TEM）和扫描电镜（SEM）等测定共混物的微观结构，采用微球柱法评价共混物的血液相容性。
Microphase separated structure of blends has been determined by means of VES. DSC, SEM and TEM. Blood compatibility of the blends was evaluated by column beads method.
扫描电镜标本用冷冻割断法，观察其割断面的表面结构。
To get the specimen for scanning electron microscope by frozen cutting and observe the structure of the cut-surface.
采用紫外光度法和扫描电镜研究了钙、镁离子对胶原自组装的影响。
Effect of calcium and magnesium ions on collagen self assembly was researched by means of ultraviolet photometry and STM.
方法：玻片法培养7种常见制备红曲用红曲霉标准株，预处理后进行扫描电镜的观察和比较。
Methods: 7 species of standard strains Monascus fungi for preparing Hongqu were cultivated on carry sheet glass and observed and compared after pretreatment using the scanning electron microscope.
采用压痕法及扫描电镜观察，研究了抗磨贝氏体球铁中裂纹的形核与扩展。
Crack nucleation and propagation in wear-resistant bainite ductile cast iron were investigated by press trace method and SEM.
恒电位深腐蚀法是目前已知的制备扫描电镜用试样的最有效的方法。
The stationary potential deep-etching method is most available than other method to prepare for metallograph analyses on SEM.
本实验对伢典化学机械去龋法进行了扫描电镜、光镜、粘结效果、临床应用等研究，以评价伢典化学机械去龋法的疗效。
This study aimed to evaluate the effect of caries removal and clinical feature with Carisolv by using scanning electron micrograph, light micrograph, shear bond strength test.
本文通过电泳法研究了五种高分子材料表面对血浆蛋白的吸附，使用扫描电镜观察了材料表面的血小板粘附状况。
In vitro adsorption of plasma protein on five polymer surfaces was studied by electrophoresis. Adhesion of platelet on these polymer surfaces was observed by scanning electron microscopy.
用热重（TG）和微分热重（DTG）法对优质和劣质PVC管进行温度扫描，并用扫描电镜（SEM）观察其微观形貌，从而鉴别出劣质PVC管和优质管的差异。
TG-DTG and SEM techniquies were used to study the quality of PVC tubes to obtain data of thermal analysis and SEM image. The technigues can distinguish superior PVC tubes from inferior ones.
利用扫描电镜、能谱仪、X射线衍射等法对熔 覆合金层、合金 层与 钢基体的结合界面等进行了显微组织及相结构的分析。
The microstructure and phase constitution of the coat and the boundary between coat and substrate were studied with SEM, EDX and X-ray analysis techniques.
利用红外光谱法(FTIR)、扫描电镜(SEM)对该聚合膜进行了化学成分和表面形貌的分析。
The chemical character and surface profile of the polymer film was studied using FTIR and SEM.
用三维视频显微镜，X射线衍射分析法，扫描电镜等测试手段对此新工艺制成的材料的组成结构及性能进行表征。
Three-dimension microscope, XRD, SEM and IR were used to analyze structure and performance of material prepared by new process.
用三维视频显微镜，X射线衍射分析法，扫描电镜等测试手段对此新工艺制成的材料的组成结构及性能进行表征。
Three-dimension microscope, XRD, SEM and IR were used to analyze structure and performance of material prepared by new process.
应用推荐