采用X衍射、傅立叶红外和扫描电镜技术分析了矿化产物的晶体结构和形貌特征。
The structures and morphologies of the mineralized products were characterized using XRD, FTIR and SEM techniques.
本研究应用血管铸型法及扫描电镜技术，对家兔右心室壁的微血管构筑进行了观察。
The microvasculature of the rabbit right ventricle was studied by the method of vascular corrosion cast and scanning electron microscopy.
运用扫描电镜技术对蓝罗非鱼侧线上鳞、侧线下鳞和侧线鳞进行了形态结构的观察。
The surface structure of scales, above lateral line, below lateral live and in lateral line, of the Oreochromis aureus were observed using scanning electron microscope.
实验中，利用石蜡切片法和扫描电镜技术对愈伤组织的发生及细胞整体形貌进行了观察。
At the same time, the callus occurrence and cell configuration of the callus were observed via paraffin slice method and scanning electron microscope technology.
用递真空扫描电镜技术和能量分散型X射线（EDX）分析方法研究了12种多年生牧草叶表面的微细构造。
The leaf epidermal microstructure among 12 perennial grasses was studied by using scanning microscope and Energy Dispersive X-ray (EDX) microanalysis.
利用扫描电镜技术、叶片离析方法和石蜡切片法对蚁花属1种和澄广花属9种植物叶的形态结构进行比较研究。
The leaf form and structure of 1 Mezzettiopsis species and 9 Orophea species were comparatively studied with the help of scanning electron microscope, epidermal maceration and paraffin section method.
方法运用扫描电镜技术观察葡萄胎90例（良性6 0例，侵蚀性30例） ，以10例正常早期胎盘绒毛作对照。
METHODS SEMT was performed to observe 90 cases with hydatidiform moles (60 cases with benign and 30 cases with invasive hydatidiform moles) and 10 cases with normal placental villis as the control.
方法：通过扫描电镜观察并辅以计算机图像处理技术来对不同牙面处理组的树脂突形态进行定性、定量分析。
Methods: the morphology of the resin tags in different groups were analysed with the scanning electric microscope and computer image-processing technique qualitatively and quantitatively.
提出并实现了三种用于增强传统的灰度扫描电镜图象的彩色化显示技术。
Three colorated displaying techniques for intensifying traditional black-white image of SEM (scanning electron microscope) were introduced and realized.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
采用声发射技术监测填充聚四氟乙烯的拉伸损伤过程，结合扫描电镜进行断口分析。
This paper dealt with tensile damage of the reinforced PTFE through detecting by acoustic emission technique and fracture analysis with scanning electron microscope.
应用微铺展技术在扫描电镜下对人类染色体的高序结构进行了研究。
The scanning electron microscopical study on higher order structure of human chromosome was made with modified surface microspreading technique.
利用扫描电镜断口分析及金相分析技术，分析了材料拉伸试件断口形貌及金相组织，初步探讨了材料的静态拉伸塑性变形机理。
The metallurgical structure and fracture morphology of the tensile specimens were investigated with SEM and metallurgical analysis, and the static tensile plastic deformation mechanism was researched.
用扫描电镜、X射线衍射和能谱技术研究石灰石粉在复合胶凝材料中的水化性能和水化产物。
The hydration properties of limestone powder in a complex binder system were studied by using scanning electron microscopy, X-ray diffraction and energy dispersive spectrometer.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术，表征了等离子喷涂氧化锆涂层的显微结构。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
本文通过热轧试验，利用扫描电镜、TEM观察和EBSD技术等分析显微组织与力学性能之间的关系。
In this paper, hot-rolling tests, using scanning electron microscopy, TEM observation and analysis of EBSD technology, microstructure and mechanical properties relationship.
利用X射线衍射（XRD）、扫描电镜（SEM）和恒电流充放电测试技术测试了制备样品的相结构、微观形貌和电化学性能。
The phase structure, morphology and electrochemical performance were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM) and galvanostatic charge-discharge cycling technique.
本文着重讨论了岩石样品的扫描电镜不镀膜定位观察技术及其使用方法。
In the paper, technique of uncoated rock samples and its operations for the SEM measurement are discussed.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
本实验利用冷冻断裂技术和扫描电镜观察了瘤细胞侵入器官后的微细结构的变化。
The present experiment applied the freeze cracking technique and scanning electron microscopy for further studies of ultrastructural changes of cancer cells after they invaded into the organ.
应用细胞融合技术和扫描电镜研究了BK(牛肾)细胞早熟凝集染色体(PCC)和诱导PCC的CHO中期染色体的超微结构。
The ultrastructure of prematurely condensed chromosomes (PCC) in BK cells and the CHO metaphase chromosomes (the PCC inducer) were studied with cell fusion technique and SEM.
利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究。
The structure and properties of Na and H type FFC-1 ion exchange fiber were studied using SEM, TG-IR, EA, BET and other chemical means.
采用X射线衍射、扫描电镜(sem)和光谱分析等测试技术，研究了多孔氧化铝介质膜的组成、结构以及光功能特性。
The structure and the optical functions of porous anodic films were studied by XRD, SEM and spectro-photometrical means.
为了更好地研究双晶片的特性，利用扫描电镜(sem)和x -射线衍射(XRD)技术，对PZT薄膜的特性进行了较为详细的研究。
In order to describe the characteristics of piezoelectric bimorph, properties of PZT film are studied by SEM and XRD.
应用电子衍衬技术和扫描电镜等手段，对共析珠光体轨钢的微观结构和断裂过程，进行了观察和分析。
The microstructure and fracture process of an eutectoid pearlitic steel have been observation and analysed by means of electron-diffraction-contrast technique and SEM.
利用扫描电镜（SEM）、透射电镜（TEM）和X射线衍射（XRD）等技术分析研究了表面层的微观结构特征。
The substructure morphology and characteristics of the treated region was examined by SEM, TEM and XRD technique.
阐述了用扫描电镜研究粉末试样的分散技术、固定方法和镀膜技术。
The paper has outlined the dispersion technology, sticking method and sputtering process for powder specimen studied by using SEM.
采用化学镀技术在预处理后的金属表面上制备镍磷二元和镍铜磷三元镀片，用X射线光电子能谱分析仪和扫描电镜分别对镀片表面的元素价态、组成及镀片表面的形貌进行表征。
The coatings of nickel-phosphor and nickel-copper-phosphor are prepared on the pretreated metal surface by electroless plating technology. The coating surface has been characterized by XPS and SEM.
利用光学显微镜、扫描电镜、定量金相等技术研究了冷却速度、铅含量、重力作用等对铝铅合金显微组织的影响。
The effects of cooling velocity, the lead content and the gravity on the microstructures of Al Pb alloy were discussed based on the results of optical microscope, SEM and quantitative metallography.
利用光学显微镜、扫描电镜、定量金相等技术研究了冷却速度、铅含量、重力作用等对铝铅合金显微组织的影响。
The effects of cooling velocity, the lead content and the gravity on the microstructures of Al Pb alloy were discussed based on the results of optical microscope, SEM and quantitative metallography.
应用推荐