利用扫描电镜和杠杆式万能强度试验机分析测定了涂层的表面形貌和附着力。
The surface morphology and adhesion power are analyzed and examined respectively by scanning electron microscope and lever style omnipotence intension test machine.
运用扫描电镜观察了这几种材料在泥沙磨损条件下的磨损表面形貌，分析了它们的磨损机理。
The wear surface morphologies were surveyed by scanning electron microscope (SEM) and wear mechanism was analyzed under the sand slurry wear condition.
利用扫描电镜断口分析及金相分析技术，分析了材料拉伸试件断口形貌及金相组织，初步探讨了材料的静态拉伸塑性变形机理。
The metallurgical structure and fracture morphology of the tensile specimens were investigated with SEM and metallurgical analysis, and the static tensile plastic deformation mechanism was researched.
采用涂层断面金相、X射线衍射、扫描电镜分析方法，研究了涂层微观形貌、组织结构、组成成份。
With coat section metallographic, X-ray diffraction and scanning electrical mirror analysis method, have studied coat microscopic shape look, organization structure and the coating's composition.
用x射线衍射（XRD）、扫描电镜（SEM）和x光电子能谱（XPS）对样品进行了结构、形貌及组分分析。
The x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS)and scanning electronic microscopy (SEM)were employed to analyze the structure, composition and surface morphology of the films .
采用扫描电镜结合能谱的测试方法，对热处理前后含铬绝缘涂层中正常涂层和斑点的表面形貌及成分进行了分析。
The surface topography and composition of normal coating and spot were investigated by scanning electron microscope and energy dispersion spectrum.
用X 射线衍射（XRD）、扫描电镜（SEM）、荧光光谱（PL）对样品进行结构、形貌和发光特性的分析。
The structure, surface morphology and the optical properties were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL).
绘制了氧化动力学曲线，用带能谱分析的扫描电镜观察了涂层的表面氧化形貌和横截面组织形貌。
The oxidation kinetics curve was drawn. The surface morphology and cross section micrograph of the Al-Si coating were studied by using SEM.
利用体视显微镜和扫描电镜对几种常见金属材料的浆体冲蚀、腐蚀形貌进行了低倍和高倍的观察分析。
Stereomicroscope and SEM were used to observe and analyze slurry erosive-corrosion surface topography of some commonly used metallic materials at low and high magnification.
采用光学显微镜、扫描电镜等分析手段，对45钢大齿轮传动轴断裂表面的金相组织、断口形貌进行了分析和检测。
The metallurgical structure and fracture morphology on gear transmission shaft of 45 steel were analyzed by means of optical microscope and scanning electron microscope.
利用扫描电镜考察摇臂试验品的断口形貌，对个别区域进行能谱分析。
Scanning electronic microscope is used to check the fracture form of swing arm trier and energy spectral analysis is done in special area.
用俄歇电子能谱(AES)、扫描电镜(sem)和原子力显微镜(afm)对薄膜的组成成分和表面形貌进行了分析。
Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to analyze component and surface morphology of the films.
采用扫描电镜（SEM）对处理过和未处理过的铝合金表面形貌进行了分析。
SEM was used to analyse the untreated and treated Al alloy surfaces.
主要采用金相、扫描电镜、X-射线衍射方法分析和探讨了初期腐蚀层形貌、腐蚀产物和合金元素的分布。
The surface morphology of corrosion layer, corrosion products, structure and alloy elements of rust layer in natural city atmosphere were studied by metallographic observation, SEM and XRD.
对冲蚀后的涂层进行扫描电镜分析表明，在小攻角下涂层形貌呈犁沟或犁皱形状，大攻角涂层形貌呈凹坑状。
Appearance of coatings is furrow at low Angle of incidence, it is notch at high Angle of incidence through SEM analysis.
用扫描电镜(SEM)分析了亚磷酸三苯酯在A3钢表面所成膜的微观形貌特征。
Micromorphology analysis by SEM is performed on the film of triphenyl phosphite formed on A3 steel.
用扫描电镜和激光粒度分析仪研究了球磨和立式磨生产的矿渣微粉的颗粒形貌和颗粒群分布。
The appearances and particle size distribution of slag micro-powder produced by ball mill and vertical mill were researched with scanning electron microscope and laser particle size analyzer.
研究高能球磨法制备纳米钼铜复合粉末的主要影响因素，通过扫描电镜和透射电镜分析粉末的形貌及颗粒尺寸。
The main influence factors of preparing molybdenum copper nano-powder by high-energy ball milling were studied; the morphology and size of powders were analyzed.
使用扫描电镜、能谱仪、X射线衍射仪，对广西六种典型花岗岩所含元素、石英相结构及微观形貌进行了测试分析。
The elements, phase structure of quartz and micro-morphology of six types of granite in Guangxi were analyzed by SEM, EDX XRD.
采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。
By means of stereomicroscopy and scanning electronic microscopy (SEM), the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.
用扫描电镜进行的冲击断面形貌分析表明，共混体的增韧机理以剪切屈服为主兼有多重银纹化。
It was found from the analysis of the impact cross section on SEM that the toughening mechanism was mainly the shear yielding with some degree of multiple crazings.
利用扫描电镜对失效压铸模具热疲劳裂纹的宏观、微观、断口形貌进行了分析。
The macro-morphology, micro-morphology and fracture morphlogy of failure die casting dies were analyzed.
利用X射线衍射(XRD)和扫描电镜(sem)等手段，对高温熔盐热腐蚀后的组织形貌、元素分布及物相进行了分析。
The microstructure? Element distribution and phase after hot-corrosion were analysed by means of X-ray diffraction (XRD) and scanning electron microscope (SEM).
通过X射线衍射、辉光放电光谱、扫描电镜等分析手段，对锌镍合金镀层的成分变化规律、微观形貌和结构以及腐蚀产物进行研究。
The coating components, microcosmic appearance, structure and corrosion products of zinc-nickel alloy had been analyzed by means of XRD, Glow Discharge Optical Emission Spectrometry and SEM.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
采用扫描电镜观察改性煤沥青的形貌；采用热解重量分析仪分析改性沥青的热行为。
Shapes of coal tar pitch modified were observed through SEM and thermal behavior was analyzed with Thermo-Gravimetric Analysis (TGA).
通过用扫描电镜对磨损表面形貌进行的观察分析，探讨了复合涂料涂层的磨损机理。
By using SEM to examine the worn surface morphology, the wear mechanisms of these coatings were explored.
运用扫描电镜（SEM）和偏光显微镜对共混物的冲击断口形貌以及结晶情况进行了观察与分析；
The morphology and the crystallinity of the blends were studied with SEM and polarizing microscope respectively.
采用扫描电镜、多孔介质孔隙分析仪揭示功能纸的表面形貌、孔径的大小以及吸附特征。
The surface morphology and the pore size were disclosed with SEM and Porous Medium surface Area Analyzer, thus discovering the adsorptive characteristics.
球墨铸铁经过气体多元共渗后可在其表面形成氮化层，通过X射线衍射和扫描电镜对渗层的相结构与形貌进行分析。
The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM.
应用推荐