扫描电镜分析表明，膜的表面平整，无裂纹。
SEM micrographs showed that the films were smooth and crack-free.
进行了红外光谱和扫描电镜分析和沥青基本指标试验。
The analysis of infrared spectrum and scan electricity mirror and asphalt basic index experiment were made.
扫描电镜分析表明：获得的薄膜在硅基片上是光滑和致密的。
SEM studies show that on the wafer substrate, the film is smooth and dense.
对复合材料断面进行扫描电镜分析，断面的纤维和树脂粘接良好。
The analysis of the SEM on the fracture surfaces of composite showed that bond…
扫描电镜分析结果表明，在可见金及显微金周围容易发现次显微金。
Around the visible gold and microscopic gold particles submicroscopic gold can usually be found under a SEM.
在扫描电镜分析中矿物表面出现的絮状物是无定形化物质的形象表现。
Floccule watched on the mineral surface in the analysis of SEM is live embodiment of amorphous substance.
分析包括结构强度分析、宏观断口分析、金相分析和扫描电镜分析等。
The failure analysis consisted of a strength analysis, a macro-fracture surface analysis, a metallurgical microscope and scanning electron microscope analysis.
用X-射线衍射和扫描电镜分析了膜的结构，阐明了结构和功能的关系。
By means of X-ray diffraction and scanning electron microscope. the relationship between structures and functional properties was discussed.
用扫描电镜分析等方法对氧化铝厂渣浆泵叶轮进行了腐蚀磨损失效分析。
The failure analysis of corrosion erosion for high chromium cast iron impeller of slag pulp pump in aluminum factory are conducted using SEM.
用金相显微镜和扫描电镜分析方法，对DB685钢板表面裂纹进行分析。
The surface cracks on steel sheet DB685 was analyzed by metallographic microscope and scanning electron microscope.
扫描电镜分析表明，最佳配方上的差异与果实的表皮结构及涂膜的结构有关。
The SEM analysis show that this difference is due to the surface structures of the fruits and the structure of the coating films.
对叶片断口扫描电镜分析显示，断口具有准解理、韧窝、应力腐蚀等复杂特征。
Scanning electron microscopy analysis on blade fracture shows: the fracture is characterized by cleavage, quasi-cleavage and stress corrosion and so on.
采用金相显微镜和扫描电镜分析了含铌微合金化钢铸坯角部横裂纹的形成原因。
The optical microscope and SEM were applied to analyze the formation mechanism of transverse corner cracks of Nb microalloyed steel slab.
最后通过混凝土实验与扫描电镜分析进一步验证了上述结论的准确性与可靠性。
At last, the accuracy and reliability of above-mentioned conclusion is validated by the concrete experiment and scanning electron microscope (SEM).
此外，通过动态变形试件的扫描电镜分析，还研究了这类新材料的动态失效问题。
In addition, the dynamic failure characteristics are studied by means of SEM analyses for PUR syntactic foams specimens after loading.
通过红外光谱和扫描电镜分析，接枝单体是依靠物理沉积和化学键作用与纤维结合的。
The IR spectrum and SEM analysis demonstrated that the graft monomers were bound to the fibers by the ways of physical deposition and chemical bonding.
采用场发射扫描电镜分析了复合镀层的表面和初始界面上的碳纳米管存在形式和分布。
Scanning electron microscope was used to observe the conformation and distribution of carbon nanotubes on the initial interface of coatings.
利用X射线衍射仪和扫描电镜分析样品的相组成、相结构、固溶情况和拉伸断口形貌。
The phase composition and structure, solid-solubility and tensile fracture surface of the samples were studied by XRD and SEM.
采用化学分析、金相分析以及扫描电镜分析等试验方法对某减震器连杆断口进行了分析。
The fracture of Piston rod of the absorber was analyzed by means of chemical composition analysis, microstructure examination and the scanning electron microscope (SEM).
对开裂的电厂水冷壁管进行了化学成分及金相组织分析，并对断口进行了扫描电镜分析。
The microstructure and chemical composition of cracked water-cooling wall pipe used in power plant were analyzed, and its fracture was analyzed by SEM.
用电子扫描电镜分析和探讨了铁矿粉在还原流化床中的粘结行为与金属铁析出形态的关系。
The relation of the sticking behaviour of fine iron ore with the separating morphology of metallic iron during reduction in a fluidized bed had been analyzed with scanning electron microscopy.
阎贺静等通过扫描电镜分析发现竹浆纤维横截面布满了孔洞。说明它具有优良的吸湿透气性。
Yan Hejing such analysis by scanning electron microscopy cross-section of bamboo fiber filled with holes, indicating that it has excellent moisture permeability.
扫描电镜分析表明：在相同的保温时间内，随正火温度的升高， 片层状珠光体越来越密集。
The result of SEM analysis shows that, within the same holding time, with normalizing temperature increasing, the layer-mesostructure is denser and denser.
催化剂的扫描电镜分析、侧压强度及抗拉强度测试证明，炭纤维使催化剂的机械强度明显提高。
Scanning electronic microscopy analysis, the side pressure and the tensile strength tests provided that mechanical strength of catalysts were obviously enhanced.
采用X射线衍射，扫描电镜分析了陶瓷的物相和显微结构，探讨了激光烧结透明陶瓷的透光机理。
By the analysis of XRD and SEM, the phase structure and microstructure were studied. Principle of transparent ceramics synthesized by laser sintering was discussed.
采用涂层断面金相、X射线衍射、扫描电镜分析方法，研究了涂层微观形貌、组织结构、组成成份。
With coat section metallographic, X-ray diffraction and scanning electrical mirror analysis method, have studied coat microscopic shape look, organization structure and the coating's composition.
采用高压真空器件解剖、扫描电镜分析和高压脉冲耐压试验分析了高压真空器件内的真空击穿、陶瓷击穿。
Subsequently, the breakdown happened inside of the high-voltage vacuum apparatus was researched initially by means of scanning electron microscope analysis and vacuum apparatus dissection.
样品的SEM扫描电镜分析结果显示，通过标准养护和热养护制备的加气混凝土的水化产物有很大的差异。
Samples of SEM analysis showed that the preparation of aerated concrete hydration products have great difference between standard maintenance and thermal curing maintenance.
扫描电镜分析证实，此复合粉末体系的激光烧结是基于液相烧结机制，表面自由能的改变是其烧结的原动力。
The scanning electron microscope analyses proves that the bonding mechanism of this process is liquid phase sintering, the change of surface freedom energy is the motivity for sintering.
通过金相、扫描电镜分析和物理性能测试等手段，对由镀铜石墨粉制备成的复合材料的组织、性能进行研究。
By means of the analyses of SEM and metallograph and physical tests, the microstructure, properties of composites made from copper-coated-graphite powder were studied.
应用推荐