方法采用扫描电子显微镜观察法。
用扫描电子显微镜观察分析粉末的微观形貌变化。
The distribution of particle size of the milled powder was observed by metallographic microscope.
采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
The worn surfaces of the composites were observed on a scanning electron microscope.
用扫描电子显微镜观察和测量腐蚀后硅样品的亚表面裂纹。
The depth of cracks on the silicon sample subsurface corroded was measured by a scanning electron microscope.
利用扫描电子显微镜观察了6种蝶复眼小眼面的表面结构。
The ommatidial surface ultrastructure of ommateum of 6 butterfly species were observed with scanning electronic microscope.
同时借助扫描电子显微镜观察了不同条件下镀层的微观表面形貌。
The surface morphology of the deposits obtained under various pulse parameters was investigated by SEM.
应用光学显微镜和扫描电子显微镜观察了凡纳对虾小触角的表面结构。
The surface structures of the antennule of white shrimp, Penaeus vannamei , were observed in detail with light and scanning electron microscope.
扫描电子显微镜观察镍钛金属表面血小板吸附、聚集，纤维蛋白生成。
Scanning electron microscopy was used for the manifestation of the surface characterizations such as protein adsorption and platelet adhesion.
对于变形组和分离组器械进行扫描电子显微镜观察，分析器械分离类型。
A scanning electron microscope was used to examine some typical changes of the fractured instruments to analyze the separation types.
作者用扫描电子显微镜观察了103个桃品种和3个桃近缘野生种的花粉粒。
Pollen grains of 103 peach cultivars were examined using the Scanning Electron Microscopy.
本文利用扫描电子显微镜观察“JT烧伤液”对烧伤感染细菌作用的超微现象。
Observing the effect of "the JT liquid of burn" on bacterial infection by using SEM.
使用X射线衍射仪分析了产物的相结构，采用扫描电子显微镜观察了粉体颗粒形貌。
The phase and the microstructure of the products were analysed by X-ray diffractometer and scanning electron microscope.
用扫描电子显微镜观察了槐树试管苗在移栽驯化及大田生长过程中叶表面结构的变化。
The structural changes of leaf surface in acclimatization and growth in field of in vitro plantlets of Sophora japonica were studied using scanning electron microscope.
用扫描电子显微镜观察了样品的形貌结构，用分光光度计测量了样品的透射光谱和偏振光谱。
We observe the morphology image of the samples by scanning electron microscopy (SEM), and measure the transmission spectrum and the polarization spectrum of the samples by the spectrophotometer.
并采用维氏压头测量断裂韧性KIC和通过扫描电子显微镜观察压痕形貌来评定涂层的韧性。
The fracture toughness KIC of TiAlN coating has been measured by Weishi indenter indentor and the appearance of impress has also been observed by SEM.
用扫描电子显微镜观察所得金刚石膜的表面形貌，用ZC 36高阻仪测量金刚石薄膜的电阻率。
The surface morphology of the diamond films were observed with SEM, and the resistivity of diamond films were measured with ZC36 high resistance instrument.
利用扫描电子显微镜观察，对花卉盆钵气孔进行分析，量化，并提出气孔度的新概念，按花卉盆钵气孔度大小聚类分类。
Using scanning electronic microscope, gas hole of flowerpots were studied and analyzed quantitatively and a technical terms, gas hole degree was put forword, on which clustering analysis was based.
采用扫描电子显微镜观察人工栽培桑黄子实体的显微形态及其结构，如菌管、子实层、担孢子、锥形刚毛及离散菌丝结构等。
The micro-morphology of log-cultivated Phellinus igniarius, hymenium , basidiospore, conical seta and the discrete structure of mycelia were observed under scanning electron microscope.
利用扫描电子显微镜观察分析了聚碳酸酯、尼龙6、低密度聚乙烯的微观断裂行为，并对其断裂起因、断裂过程及断裂形态进行了讨论。
The fracture morphology of PC, PA6, LDPE is analyzed by using scanning electron microscopy (SEM), and the fracture cause, fracture process and fracture morphology are discussed respectively.
利用扫描电子显微镜观察了黑胸大蠊Periplanetafuliginosa（Serville）成虫下颚须和下唇须上的感器形态。
The external morphology of sensilla on maxillary and labial palpus of Periplaneta fuliginosa(Serville) was observed with scanning electron microscope.
与此相反，扫描电子显微镜揭示世界的方式接近于我们自然地观察物体的方式，是一个具有外表和三维的世界。
In contrast, the scanning electron microscope reveals a world familiar to the way we naturally see things, a world with outer surfaces and in three dimensions.
反差倒转换图象是扫描电子显微镜能观察到的一种图象。
The inverse contrast image is an image observed by the scanning electronic microscope.
同时，利用细胞学和扫描电子显微镜技术观察了愈伤组织形成和器官发生过程。
Meanwhile, the processes of callus formation and organogenesis were observed by means of cytological and scanning electron microscopic techniques.
STM图像显示出石墨单色器表面存存着台阶和大的波纹起伏，而用扫描电子显微镜却不能观察到这样的结果。
The STM images show both the larger corrugations and terraces existing on the surface, which would not be observed by SEM.
方法：利用扫描电子显微镜（SEM）观察COM的生长和聚集。
Methods: studying growth and aggregation of COM crystals using the scanning electron microscopy (SEM).
采用能量色散x射线谱(EDS)分析得出涂层成分，利用扫描电子显微镜(SEM)观察涂层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS). The morphology of the coatings was observed by scanning electron microscopy (SEM).
采用扫描电子显微镜(SEM)观察表面腐蚀形貌，XRD进行腐蚀产物分析。
Surface morphologies were observed by scanning electron microscopy (SEM), and X-ray diffraction (XRD) was used to analyze the crystal corrosion products.
采用能量色散x射线谱(EDS)分析得出镀层成分，利用扫描电子显微镜(SEM)观察镀层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS), and the morphology of the coatings was observed by scanning electron microscopy (SEM).
采用能量色散x射线谱(EDS)分析得出镀层成分，利用扫描电子显微镜(SEM)观察镀层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS), and the morphology of the coatings was observed by scanning electron microscopy (SEM).
应用推荐