金相组织、扫描电子显微镜分析试验。
Metallographic structure, Scanning electron microscope analysis test.
采用极化曲线测试结合扫描电子显微镜分析技术，研究了退火对铝合金阳极的活性的影响。
The effects of annealing on the activity of al alloy anode were studied by measurement of polarization curves and analysis of SEM.
该小组还收集了啄木鸟头骨的计算机断层扫描和扫描电子显微镜分析，在细节上梳理出骨密度不同的各部分如何结合在一起。
The team also gathered computed tomography and scanning electron microscope analyses of woodpecker skulls, laying out in detail how the parts fit together and where bone density varied.
对疏松型纳米氢氧化镁(LN - MH)阻燃剂进行了扫描电子显微镜分析、X -射线衍射分析、元素分析、傅立叶变换红外光谱和粒径测定。
SEM, XRD, elementary analysis and FTIR were adopted to characterize the loose nano magnesium hydroxide (LN-MH), followed by the measurement of particle diameter.
用扫描电子显微镜和X射线衍射技术分析了微晶玻璃析晶和显微特征。
The crystallization and microstructure of the glass were investigated using scanning electron microscopy and X-ray diffraction technique.
利用扫描电子显微镜（SEM ）、显微喇曼光谱、X射线衍射等手段对合成的金刚石薄膜的成分与结构进行了分析。
The constituents and the structures of the diamond films have been identified by means of scanning electron microscopy (SEM), Raman spectroscopy and X-ray diffraction.
利用扫描电子显微镜(SEM)分析了阳极氧化后及产品失效后阳极钽芯表面介质膜的微观结构，并对液钽电容器失效机理进行了探讨。
The surface microstructure of anodic tantalum core was analyzed by scanning electron microscope (SEM), and then analyzed the failure mechanism of wet tantalum capacitor.
采用扫描电子显微镜(SEM)观察表面腐蚀形貌，XRD进行腐蚀产物分析。
Surface morphologies were observed by scanning electron microscopy (SEM), and X-ray diffraction (XRD) was used to analyze the crystal corrosion products.
通过扫描电子显微镜（SEM）和表面轮廓仪分析配副材料的磨痕表面形貌。
The morphology of worn surface was analyzed via scanning electron microscope (SEM) and by using a surface profilometer.
试验采用比表面积分析仪、环境扫描电子显微镜、快速水分测定仪分别对纤维涂层形貌以及渗水特性进行表征。
The appearance and Water-releasing Characteristics were described by BET surface area measurement, the environment scanning electron microscope and fast water equipment.
用扫描电子显微镜(sem)和X射线光电子能谱仪(XPS)对钢球磨损表面进行了分析。
The worn surfaces of the steel balls were analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS).
使用扫描电子显微镜（SEM）和能谱分析（EDS）等观察分析磨损钢球表面的磨痕形貌、化学元素和纳米粒子形态。
The surface morphology of wear scar, nanoparticles and its element distribution have been tested and analyzed by scanning electron microscope(SEM) and energy dispersive spectrometry(EDS).
利用红外光谱和扫描电子显微镜对反硝化生物膜生长前后pbs颗粒表面形态、化学组成的变化进行了分析。
The effect of denitrification on the surface configuration and chemical composition of PBS was analyzed by using IR spectrum and SEM observation.
本文介绍模拟式电子显微镜扫描系统的基本组成，对系统整体和各单元电路的工作原理进行了分析。
The general composition of the sweep systems in analogue electron microscopes was introduced, then the operation principle for the whole system and all the related circuits was discussed.
用扫描电子显微镜和X射线光电子能谱仪观察分析了磨损表面形貌和元素化学形态。
Worn surface morphology and element chemistry configuration of steel ball were analyzed by means of X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM).
采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
The worn surfaces of the composites were observed on a scanning electron microscope.
利用扫描电子显微镜观察分析了聚碳酸酯、尼龙6、低密度聚乙烯的微观断裂行为，并对其断裂起因、断裂过程及断裂形态进行了讨论。
The fracture morphology of PC, PA6, LDPE is analyzed by using scanning electron microscopy (SEM), and the fracture cause, fracture process and fracture morphology are discussed respectively.
采用直读光谱仪、显微硬度机、光学显微镜和扫描电子显微镜等分析手段，对失效的汽车发动机活塞连杆总成断裂原因进行了分析。
Aemission spectrometer, micro-hardometer, optical microscope and scanning electron microscope were used to analyze the reason of crack on connecting rod unit assembly for piston of car engine.
运用能谱技术（EDXA）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
利用透射电子显微镜、X射线衍射仪、扫描电子显微镜和X射线能量色散谱仪分析了多层膜的微结构。
The microstructure of multilayers was characterized by high-resolution transmission electron microscopy, X-ray diffraction, scanning electron microscope and energy dispersive spectrometer.
用扫描电子显微镜(SEM)对粉料及微波合成的块体样品表面进行物相分析和元素的半定量分析。
Scaning electronics microscopy (SEM) was applied hereby to surface phase and elements analysis of the powder by precursor method and grain sample by microwave method.
用X射线衍射仪（XRD）对膜层的化学组成及结构进行了表征，用扫描电子显微镜（SEM）对膜层的形貌进行了分析。
The chemical composition and micro-structure of the coating were examined with XRD and the morphography of the coating was analyzed with SEM.
用扫描电子显微镜（SEM）分析了煤沥青中原生喹淋不溶物（QI）的形貌，考察了不同有机溶剂对分离中间相微球的影响；
The morphology of pri- mary QI was observed under Scanning Electron Microscope (SEM) . The effects of solvents on the seperation of MCMBs were examined.
利用金相分析理论，结合扫描电子显微镜，对司法物证中金属分物的同一性鉴定，是一种简便、快速、准确的新方法。
By the theory of metallographic analysis and SEM, it is a new means to appraise the metal disjunction of identity of judicature evidence.
利用扫描电子显微镜对微细化淀粉的颗粒形貌进行了分析比较。
The micronized starch granular was analyzed and compared through Scan Electron Microscope.
采用能量色散x射线谱(EDS)分析得出涂层成分，利用扫描电子显微镜(SEM)观察涂层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS). The morphology of the coatings was observed by scanning electron microscopy (SEM).
采用能量色散x射线谱(EDS)分析得出涂层成分，利用扫描电子显微镜(SEM)观察涂层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS). The morphology of the coatings was observed by scanning electron microscopy (SEM).
应用推荐