介绍了一种反射模式近场扫描光学显微镜。
SNOM operating in reflection mode was described in this article.
自从提出了近场光学技术以来，由于近场扫描光学显微镜（NSOM）系统的复杂性而使得近扬的引入和利用变得困难。
The introduction of optical near field is oriented to overcome this disadvantage, yet the complexity of NSOM system makes it difficult to induct and utilize the near field.
利用光学显微镜(OM)和扫描电镜(SEM)对麦秆横切面、内、外表面的组织结构进行了观察和分析。
By using Optical Microscope (OM) and Scanning Electron Microscope (SEM), the structural features of cross section, interior and exterior surfaces for wheat straws were observed and analyzed.
这种扫描器被用于扫描近场光学显微镜探测系统中。
This kind of scanner has been used in the system of scanning near field optical microscope.
采用光学显微镜和扫描电镜对断裂转向节臂的宏、微观组织进行了分析。
Macro and micro structure of the fractured steering knuckle arm was examined by optical microscope and scanning electron microscope.
采用光学显微镜、扫描电镜等分析手段，对45钢大齿轮传动轴断裂表面的金相组织、断口形貌进行了分析和检测。
The metallurgical structure and fracture morphology on gear transmission shaft of 45 steel were analyzed by means of optical microscope and scanning electron microscope.
本文对11种产于我国的木蓼属植物和1种哈萨克斯坦特有的穆氏木蓼花粉形态进行了光学显微镜和扫描电镜观察。
This paper, using the optical microscope and scanning electron microscope, made an observation on the pollen shapes of 11 species of Atraphaxis L, plants in our state and 1 species of A.
针对法兰盘加工面上出现的黑纹缺陷，采用光学显微镜、扫描电镜和电子探针等测试方法对其进行了分析。
Analysis is made on the dark lines defects occurring over the working surface of flange by measurement with the optical microscope, Scanning electro microscope (SEM) and electronic probe.
扩散偶和合金样品采用光学显微镜、扫描电镜和电子探针显微分析技术进行分析。
Both the diffusion couple specimens and the alloys were examined by means of optical microscopy, scanning electron microscopy, and electron probe microanalysis.
利用光学显微镜、扫描电镜、显微硬度计及X射线衍射仪分析了高氮奥氏体的等温分解过程。
Employed by optical microscope, scanning electron microscope, microhardness tester and X ray diffraction instrument, the isothermal decomposition process of high nitrogen austenite was investigated.
用光学、扫描电子显微镜及显微硬度计，研究了低碳钢在高频弯曲疲劳过程中的形变及断裂。
The deformation and fracture of mild steel under high frequency bending fatigue has been studied by optical microscope, scanning electron microscope and microhardness determination.
橱普通光学显微镜及扫描电镜观察。
利用光学显微镜、扫描电镜和X射线衍射仪研究了几种不同状态硅砖的晶体形貌和晶格常数。
The crystalline morphology and lattice constants of silica bricks in several status were investigated by the optic microscope, scanning electron microscope and X-ray diffraction.
基于这一原理，我们研究了一种使用扫描显微镜和微计算机测量光学传递函数的方法。
Based on this principle, a method is described in this paper of measuring OTF of an optical system by means of scanning photometric microscope eyepices.
采用扫描电镜及光学显微镜对压力机偏心齿轮主轴断口进行了系统的分析。
Experimental techniques such as optical microscopy and scanning electron microscopy were used to study fracture of press eccentric gear main shaft.
在扫描电镜和光学显微镜下分别观察了黄豆亚属3种植物种皮的表面结构和解剖结构。
The anatomic and surface structures of the seed coat of 3 species of Soja are observed under the light microscope and the scanning electronic microscope .
应用扫描电镜、光学显微镜和化学分析等检测手段，对地角螺栓断裂原因进行了探讨。
The analysis of fracture failure for anchor bolts were made by means of SEM , optical microscope and chemical analysis.
通过光学显微镜和扫描电镜观察，研究了盐生植物黑果枸杞叶的形态解剖学特征。
The morphological and anatomical features of leaves of halophytes Lycium ruthenicum were observed and studied using microscope and scanning electron microscope.
在光学显微镜和扫描电镜下对短柱茶组9种1变种的花粉进行形态观察和比较研究。
Pollen morphology of 9 species and 1 variety in section Paracamellia was observed and compared by means of light microscope (LM) and scanning electron microscope (SEM).
方法：采用扫描电子显微镜和光学显微镜进行观察。
Methods: Using microscope and scanning electron microscope, characteristics of the Pinellia pedatisecta Schott. were studied comparatively.
采用光学显微镜、扫描电镜、硬度测试等方法，对摩托车后轮轴断裂件进行了分析。
The fracture of motorcycle rear axle has been analyzed through optical microscope, SEM and hardness test.
利用光学显微镜、扫描电子显微镜和电子探针研究了不同保温时间对钢液中非金属夹杂物的形状、成分和尺寸的影响。
The effects of different holding times on the shapes, compositions and sizes of the inclusions were investigated by using optical and scanning electron microscopes and by the electron microprobe.
用光学显微镜和扫描电子显微镜研究了粉末形状、表面形态和包复层、粘接处的显微组织。
Particle shape, surface morphology and microstructure of skin layers and adhering satellites were studied by using optical and scanning electron microscopy.
采用光学显微镜和扫描电镜等试验手段分析了某裂解器加热器壳体出现开裂的原因。
The reasons for cracking of a cracker heater shell had been revealed with the aid of optical microscope and scanning electron microscope et al.
本文报道了用光学显微镜和扫描电子显微镜对葫芦藓孢子形态、孢壁及纹饰等较详细观察的结果。
This paper deals with observation by light and scanning electron microscope on the spore morphology. sporoderm structure and spore-surface ornamental design of Funaria hygrometrica.
在钎焊和界面微观结构的特点是光学显微镜，扫描电子显微镜和能谱。
The braze and interfacial microstructures were characterized by optical microscopy, scanning electron microscopy, and energy dispersive spectroscopy.
讨论了数码显微镜系统及激光扫描共聚焦显微镜系统的光学原理。
Discussed the optical imaging principle of the digital microscope system and the laser scanning confocal microscope system.
采用光学显微镜，扫描电子显微镜及X光衍射研究了合金的显微组织、碳化物形态及分布。
The microstructure of the alloy as well as morphology and distribution of carbides were examined by using light microscope, SEM and X-ray diffractometer.
采用光学显微镜，扫描电子显微镜及X光衍射研究了合金的显微组织、碳化物形态及分布。
The microstructure of the alloy as well as morphology and distribution of carbides were examined by using light microscope, SEM and X-ray diffractometer.
应用推荐