界面分析认为，薄膜与基体的界面为伪扩散界面。
The analysis showed that it was a pseudo-diffusion interface between the film and the substrate.
以纯物质的凝固过程为研究对象，利用明锐界面模型和扩散界面模型进行数值模拟工作。
Take advantages of the sharp-interface model and the diffusive interface model, the simulation work of this paper is focused on pure materials.
有机气凝胶中存在的扩散界面层在其裂解过程中消失，这可能是由于在裂解过程中扩散界面层向粒子迁移以降低界面能所致。
After pyrolysis, the polydispersion is retained in the carbon aerogel, however, the diffuse interface layer disappears due to migration of the layer to particles to reduce the interface energy.
设计了一个数值模型来模拟一个反应物在明胶层中边扩散边在油珠界面上与另一个反应物反应的动力学过程。
A numerical model was designed to simulate the kinetic process of diffusion and reaction of one reactant with another on the interface of droplets in a gelatin layer.
本文采用一个简单模型，在仅计质量无序的情况下，由CPA方法讨论了超晶格中界面两侧原子的互扩散对其声子结构的影响。
With a simple model and only considering the mass disorder, we have discussed the effect of interface diffusion on the phonon structure of superlattices by means of CPA method.
氧化控速过程为“界面反应和扩散混合控制过程”。
The oxidation control factor is "the mixed control of interface reaction and diffusion".
薄膜电阻率随退火温度的变化行为与薄膜微观结构的变化以及界面扩散有关。
The annealing behavior of the resistivity is correlated with the microstructure and interfacial diffusion of the films.
研究结果表明，镍基钎焊层通过扩散形成界面，实现了完全的冶金结合。
The results show that the interface between nickel solder and steel is metallurgical joint by diffusion.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
复合材料界面结构由芯材扩散层、激冷凝固层、方向性生长层和胞状晶粒层组成。
The interface structure of composite consists of core material diffusion layer, chilling solidified layer, directional growth layer, and cellular granular layer.
采用T扫描方法可以得到扩散焊接界面的紧贴型缺陷分布。
The distribution of the kiss defects on diffusion welded interfaces could be obtained by T-scan imaging.
重点介绍了以界面反应为主、扩散为主的反应机理和活度控制的金属相变机理。
And the paper emphasized on the interface reaction mechanism, diffusion mechanism and metallic phase transformation mechanism which is controlled by activation.
当晶体溶解在不饱和溶液中时，分子就会在固液界面处产生相应的扩散。
Crystals in an unsaturated solution dissolve, with subsequent diffusion away from the solid-liquid interface.
射线能谱仪分析结果表明界面间的元素扩散十分强烈，并由此促进了覆铝钢板与搪瓷层形成良好的密着。
The X-ray photoelectron spectroscopic analysis showed that there existed a strong elemental diffusion at interface which resulted in the strong adherence between the enamel and aluminum-coated steel.
本文根据紊动扩散理论及气液界面质量传递过程，提出了紊动水体复氧过程的概化模型。
Based on turbulent diffusion theory and the mechanism of liquid-gas interfacial mass transfer, a conceptual model of turbulent re-aeration process is proposed.
结果表明，异质界面之间存在明显的扩散层。
The experimental results indicate that evident diffusion layers exist at the interfaces of different phases.
研究了在铜粉和镍粉反应形成固溶体组织的过程中，影响铜粉和镍粉界面扩散和迁移的因素。
The affecting factors on interface diffusion and migration of Cu and Ni powders have been investigated during the process of Cu Ni solid solution which be formed by reaction of Cu and Ni powders.
结果表明，用内压扩散复合方法实现了铜钢界面的冶金结合。
The results showed that it is feasible to obtain a metallurgical bonded interface of copper and steel by inner-pressure diffusion technique.
结果表明，密着性能优良的无铅建筑铝搪瓷界面存在铝元素与瓷釉元素相互扩散的中间过渡层；
The results show that there is an interlayer, which is developed at the interface due to the interdiffusion of aluminium element and enamel elements .
本文用CPA方法研究了界面扩散对超晶格电子结构的影响。
We have calculated the influence of the interfacial diffusion on the electronic structures of the metallic superlattices by using the CPA method.
结合界面两侧元素相互扩散的趋势明显。
In both sides of the bonded interface, the interdiffusion of components was evident.
因此，强化固液间的分子扩散和界面更新是提高树脂催化蔗糖溶液水解速率的途径。
So, enhance the molecule diffusion and the interphaserenovation is the way to increase the rate of hydrolysis.
其连接机理为烧结过程中母材与连接材料间的扩散反应，以及界面处颗粒间的相互镶嵌。
The joining mechanism were diffuse reaction between matrix and joined materials and particles inlaying each other in the joint.
利用传统的元胞自动机方法摸拟了基于溶质扩散控制界面生长机制的枝晶演变和显微偏析。
The dendrite evolution and micro-segregation based on mechanism of solute diffusion controlling interfacial growth is simulated by cellular automaton.
结果表明，炉管的氧化机理主要是金属离子穿过氧化物层的扩散并在氧化物—气体界面发生反应。
The results show that oxidizing mechanism of the heater tube is mainly diffusion of metal ion passing through oxide and its reaction at the oxide-gases boundary.
随着烧结温度的升高，元素扩散加剧，过渡层的厚度越厚，材料的层间界面结合强度升高，石墨层与BN层结合的越好。
With increasing sintering temperature, the joint of graphite and BN was increased and also there was transition layer in the interfaces relative to HP.
讨论了界面吸附、脱附与扩散对传质阻力的不同影响，建立了薄膜传质的串联阻力模型。
The different effects of external sorption, adsorption and diffusion on mass transfer resistance are discussed and the resistance model of membrane mass transfer was built.
元素在界面两侧的扩散是影响材料显微组织、表观硬度及界面结合强度的关键。
The interfacial diffusion of alloying element is an important factor to microstructure, apparent hardness and interfacial bond strength.
实验表明，爆炸焊接界面虽然具有熔化、扩散和压力焊的特征，但不能用熔焊和扩散焊机理来解释爆炸焊接界面的成因。
Although the interface has the features of melt, and pressure welding, the molten and diffusion welding cannot explain the bonding mechanism of explosive welding.
至今界面平均声能扩散系数的确定方法很少。
But there have been very few means for determining the average sound energy diffusion coefficient.
应用推荐