化液主要由成膜剂、促进剂及添加剂组成。
The phosphorated fluid mainly consists of film forming agent, promoter and additive.
磷化液主要由成膜剂、促进剂及添加剂组成。
The phosphorated fluid mainly consists of film forming agent, promoter and additive.
可以加入成膜剂以确保长期的喷枪化妆的定妆效果。
Film formers can be added to ensure a prolonged setting of the airbrushed makeup.
该施胶剂组合物可包括一种或多种偶联剂和一种或多种成膜剂。
The size composition may include one or more coupling agents and one or more film forming agents.
并选择最佳配方,制备水性pu树脂,作为木器漆使用的成膜剂。
The waterborne PU resin with best property is prepared as the film former applied in wood paint.
甲壳糖醋酸水溶液为成膜剂,掺入短纤维后用戊二醛交联得到多彩涂料。
A waterborne multicolor paint is prepared by chitosan in acetic acid solution, mixing with short fiber and crosslinked by glutaric dialdehyde.
可作为乳化剂、增稠剂、分散剂、稳定剂、上浆剂、成膜剂、保水剂等。
May as the emulsifier, the thickening agent, dispersing agent, the stabilizer, sizing agent, film-former, water retention agent and so on.
该成膜剂有效提高玻纤的浸润性、硬挺性,以适应FRP新工艺对玻纤的要求。
It increased effectively the impregnation, stiffness of glass fiber, so as to meet the requirements of new technique of FRP.
本文设计采用水性聚氨酯为基本成膜剂,并对其进行改性,满足产品的性能要求。
Polyurethane is designed as basic resin and improved from its basic properties to satisfy command from new leather products.
该成膜剂优选在允许该聚氨酯成膜剂同时或几乎同时去封端和固化的温度下去封端。
The blocking agent preferably de-blocks at a temperature that permits simultaneous or nearly simultaneous de-blocking and curing of the polyurethane film former.
本论文对乳胶漆的成膜机理、成膜剂的选择以及成膜剂的作用及其影响因素作了分析。
Mechanics of film forming of emulsion paint, action and effect of assistant of film forming are analyzed.
介绍了粘合剂的成膜剂、增粘剂、粘接促进剂、偶联剂、固化剂、填料和溶剂等组分的主要品种和作用。
The sorts and the function of components in the adhesives, including film-forming agents, adhesion synergists, adhesion promoters, coupling and curing agents, fillers and solvents, were introduced.
以水玻璃为成膜剂,以氢氧化铝、高岭土和硼砂等为填料,再掺入一些助剂,制得膨胀型无机防火涂料。
A dilative inorganic fire proofing coatings based on water glass as binder has been prepared, which contains Aluminun hydroxide, Kaoline and Sodium Borate.
介绍了耐水型光聚合丝印感光胶的制备方法,讨论了成膜剂、活性单体、阻聚剂等对感光胶感光成像性能的影响。
This article reports the preparation process of the photopolymer emulsion, and the effects of the monomer, film former and inhibitor on the photosensitivity and image forming property of the emulsion.
结果表明,合适的活性单体和成膜剂以及坚膜剂可以显著的提高印版的耐水性,加热老化对印版的耐水性影响不大。
The results indicated that the suitable monomers and film former can improve this property remarkably, and the effect of heating is not very important.
经SEM和FT-IR的研究结果表明:在浸润剂中添加了成膜剂后,复合材料的界面可以达到良好的结合状态,材料的力学性能也有明显提高。
The results of SEM and FT-IR suggest that good adhesion in the interfaces of composites is observed and mechanical properties are improved by adding special film-forming agent into immersion agent .
综述了有机硅烷偶联剂的种类、成膜机理、聚合物-金属界面模型、薄膜制备、薄膜及涂层制品的性能。
The types of silane coupling agents, the mechanism of film formation, model of polymer-metal interface, the preparation of silane films and the properties of films and coatings were summarized.
研制了一种以石蜡、微晶蜡和液蜡复配为成膜物质并经乳化而成的混凝土养护剂。
A concrete curing agent of emulsion wax was obtained with the combination of paraffin wax, microcrystal wax and liquid wax.
探讨了一种新型水基憎水剂的制备和成膜工艺,并分析了预处理金属表面超憎水膜的形成机理。
The preparation of a new kind of water-based hydrophobic agent and the mechanism of forming super hydrophobic film on pretreated metal surface are studied.
这些防护剂主要包括一些亲水性的有机硅和成膜型防护剂。
The protective agent includes a number of hydrophilic organic silicon and film-forming protective agent.
以此共聚物为成膜物,再采用合适的固化剂,添加适当的颜填料配成涂料。
By adding some suitable pigment and fillings into this polymerization, a new type high-temperature coating was synthesized.
通过对成膜物质、阻燃剂、助剂及成膜过程的试验分析,筛选出最佳工艺配方。
The best formulation was selected by test analysis of film forming materials, fire-retardant, additives and film forming process.
研究了成膜介质和还原剂对大豆分离蛋白膜(SPI)性能的影响。
Effect of filming medium and reducing agents on the properties of soy protein isolate film (SPI) was studied.
讨论了成膜树脂、金属微粉、各种添加剂和溶剂等对涂层电磁屏蔽的影响。
The effects of film-forming resins, metallic powder, additives and solvents on the electromagnetic shielding and microstructure of the film were discussed.
本文从碳氟表面活性剂与水成膜泡沫灭火剂的关系出发,分析了我国水成膜泡沫灭火剂未能大量推广使用的主要原因。
The reason of aqueous film forming foam (AFFF) having not been used widely in China was discussed, based on the relationship between AFFF and fluorocarbon surfactants.
研制了一种以石蜡、微晶蜡和高聚物树脂为成膜物质并经乳化而成的混凝土养护剂。
A polymer modified concrete curing agent of emulsion wax was obtained from the combination of paraffin wax, microcrystalline wax and polymers by use of Uniform Design Software.
目的考察4种醇溶性成膜材料的物理性质、成膜特性,探讨醇溶液型涂膜剂的适宜成膜材料。
Objectives To evaluate the physical properties of 4 ethanol-soluble filming materials for exploring appropriate filming materials of pellicles.
以自制的可再分散乳胶为主要成膜物质,结合水泥水硬性无机粘结剂制备了腻子面漆二合一内墙涂料,重点讨论了可再分散乳胶粉、纤维素醚、粉状憎水剂对涂膜性能的影响。
Putty and finish two-in-one interior wall coating was preparation by use of re-dispersible emulsion powders prepared in the lab as film forming materials and cement as inorganic binder.
方法:选用壳聚糖为成膜材料,制备罗红霉素涂膜剂,并建立质量控制方法,进行临床疗效观察。
Methods: Chitosan was used to prepare the roxithromycin plastics. The quality controlling method was established and the clinical therapeutic effect was observed.
方法:选用壳聚糖为成膜材料,制备罗红霉素涂膜剂,并建立质量控制方法,进行临床疗效观察。
Methods: Chitosan was used to prepare the roxithromycin plastics. The quality controlling method was established and the clinical therapeutic effect was observed.
应用推荐