讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。
Effect of drying temperature, spinning temperature, cooling and shaping condition on spinning are discussed.
详细分析了管端机械扩径的变形过程，总结了机械扩径成形条件；
On the second place, detailed analysis was implemented for the pipe end deformation process during mechanical expanding, and forming criterion was also obtained.
本文就熔融纺丝成形条件及后拉伸倍数对圆中空聚酯纤维中空度的影响进行了探讨。
The influences of formation condition and draw ratio in melt spinning on the hollowness of Circular cross section hollow polyester fiber are studied.
着重探讨了成形技术中的主要影响因素及成形条件对成形后金属基复合材料特性的影响。
The main parameters of the fabrication process and the effect of the forming conditions on FRM sheet properties are emphatically discussed in this paper.
应用各种测试手段，对共混聚丙烯竹节纤维的成形条件、形态结构和聚集态结构进行了研究。
Formation condition, morphological and bulk structures of the pp fibre were investigated by various test methods.
讨论了纺丝温度、冷却成形条件、纺丝速度、卷绕牵伸定型温度等对产品质量及生产状况的影响。
Effect of spinning temperature, cooling shaping condition, spinning speed, winding, drafting and setting temperature on product quality and the production condition are discussed.
讨论了影响纤维成形的各项因素，通过优化成形条件熏降低产品废丝率，提高腈纶纤维优级品率。
All the factors that affect fiber formation are discussed. Optimizing formation conditions and reducing disqualification products lead to a high acrylic fiber quality.
采用有限元多晶体模型对无模多点成形条件下不同加载方式的板条多点弯曲成形过程进行了数值模拟。
Numerical simulation of multi point bending process of strip under different loading paths is dealt with the finite element polycrystal model.
非对称冷却成形法是制造螺旋形三维卷曲涤纶中空短纤维的有效方法，冷却成形条件是纺丝过程的技术关键。
Unsymmertrical quenching is an effective method to prepare spiral three-dimension-crimp PET hollow fiber. Quench forming condition is the key technique in spinning.
用嫁接设备纺制涤纶FDY，讨论了切片干燥条件，纺丝温度，熔体压力，冷却成形条件等对FDY质量的影响。
PET-FDY was prepared by using combination equipment. The effect of chips drying condition, spinning temperature, melt pressure and cooling condition on the quality of FDY was discussed.
在聚酯废料生产三角异形涤纶短纤维过程中对影响纤维截面异形度的主要因素：喷丝孔截面形状、纺丝温度、冷却成形条件、后欠伸工艺参数等进行探讨。
During the process of spinning triangular heteroclite dacron fibres from polyester garbage, there are factors that may affect the hetercliteness of the intersecting surface of the fibres thus spun.
我们觉得难以接受你们的条件。(名词转换成形容词)
在螺旋焊管生产中采用铣边机铣削带钢边缘和坡口，为螺旋焊管成形、焊接创造了有利的条件。
To adopt milling machines to prepare strip edges and groove to give good condition for forming and welding of spiral submerged arc-welded pipe.
通过对零件的加工技术条件的分析，以及切削成形运动的研究。
Through the analysis of the condition of processing technique for element, as well as the research of cutting Forming movement.
地球上的孕育期已经为现在成形的“行星存有”的出现创设条件。
Gestation upon this planet has but set the stage for the emergence of the Planetary Being now taking definite form.
挤压铸造是一种先进的机械零件液态成形技术，具有工艺适用性好、工艺出品率高、机械化程度高、生产率高、劳动条件较好等优点。
Squeeze casting is an advanced liquid formation technique for machine parts, and has the advantages of high adaptability, high efficiency, high mechanization degree and good work condition.
建立了双曲率蜂窝夹层板在“点阵钉模、真空负压”条件下成形的有限元分析模型。
A finite element model was established to simulate the forming process of double curvature honeycomb sandwich panel under the conditions of "nails die, vacuum".
基于上述分析，考虑关键吸能结构件的成形历史是提高整车碰撞仿真精度的必要条件。
Based on above analysis, considering the forming history of key energy-absorbing structural parts is a necessary condition to improve the crash simulation accuracy.
首先研究了支承条件与温度变化对结构施工张拉的影响，并给出了弦支穹顶的理想张拉成形态。
The effects of supporting conditions and the temperature change on the construction of suspen-dome are investigated first in the present paper.
该文提出了一种在有限反馈条件下多入单出—正交频分复用(MISO - OFDM)系统中基于误码率的波束成形方案。
In this paper, a new transmit beamforming scheme with limited feedback is presented in Multiple-Input Single-Output Orthogonal Frequency Division Multiplexing (MISO-OFDM) systems.
对成形磨齿法中用圆弧作齿根过渡曲线，提出了确保光滑连接的计算公式，并依据传动条件进行验算的方法。
The paper suggests formula to ensure smooth connection of gear arc with form grinding of transition curve, also a checking method is used according to the condition of driving system.
乙烯和催化剂等原料在一定条件下反应得到聚乙烯或者聚氯乙烯，然后除杂，净化，熔化加颜料，成形就完成了。
Ethylene and catalyst materials such as reaction under certain conditions, and then get polyethylene or PVC removing impurity, purification, melting add pigment, forming is completed.
在给定的成形工艺条件下，模具材料的机械性能对模具寿命和模具的损坏影响很大。
Die life and DE failure are greatly affected by the mechanical properties of the die materials under the conditions that exist in a given deformation process.
采用SEM和AFM对不同条件下制得的纤维和膜进行测试，揭示干湿纺纤维成形机理。
The formation mechanism of PAN fiber was studied with the helps of SEM and AFM.
对触变成形AZ91D镁合金件进行了不同条件的热处理研究。
The heat treatment of thixoformed alloy AZ91D was studied in different conditions.
研究了AZ31镁合金板材不同工艺条件下的气胀成形性能。
The superplastic gas bulging forming of a rolled magnesium alloy AZ31 at different temperature and gas pressure was researched.
在拉伸和加压复合条件下复合成形的制造工艺。第7部分：液压成形加宽。分类、细类、术语和定义。
Manufacturing processes forming under combination of tensile and compressive conditions - Part 7: Hydroforming widening; Classification, subdivision, terms and definitions.
模具的温度控制和调节是高效而经济地生产高质量成形零件的必不可少的条件。
The control and regulation of die temperature is vital to producing high-quality shaping parts effectively and economically.
模具的温度控制和调节是高效而经济地生产高质量成形零件的必不可少的条件。
The control and regulation of die temperature is vital to producing high-quality shaping parts effectively and economically.
应用推荐