挤出工具，制造带有翅片的成形件的方法，和散热器。
Extrusion tool, method for manufacturing shaped article with fins, and heat sink.
然后在成形件碳化后在非氧化的氛围中作为碳部件供使用。
Then, the carbon parts are available after carbonisation of the moulded parts in non-oxidizing atmosphere.
结果发现，成形件内部存在两种类型的缺陷，即气孔和熔合不良。
The results showed that there were two kinds of defects, porosity and ill bonding in the laser multi-layer cladding.
在裂纹和残余应力分析的基础上，研究激光快速成形件的力学性能。
Based on the analysis of crack and residual stress, mechanical property of Laser Rapid Forming sample is studied.
介绍了置氢钛合金粉末成形工艺、成形件的性能以及氢的作用机制。
The formation technologies of Ti alloy powder with hydrogen, properties of formed parts as well as the work mechanism of hydrogen in the Ti alloy powder were described.
随着橡胶密封圈的大批量生产，对橡胶成形件自动修剪机的需求也跟着扩大。
With the mass production of rubber lock ring, the demands of rubber forming automatic trimmer is growing rapidly.
该技术与快速制模技术相结合，可制造能生产上千件金属薄板成形件的模具。
Combining that technology with Rapid Tooling, it can make the die which enable produce thousands sheet metal parts.
按设计要求，必要的压力导管和钢梁可以与成形件做在一起，也可以以后再加。
Necessary pressure tubes and steel beams may be either incorporated in the block or added later, depending on the design.
提出了一种铺丝路径的优化生成算法，用以提高成形件的强度并减少复合材料的用量。
Planning fiber placement paths according to the distribution of principal stress can reduce the amount of composite materials and enhance the strength of structure.
焊道搭接量对保证三维堆焊成形过程的顺利进行以及成形件的精度都有较为重要的影响。
The lapping amount of bead is critical not only for the trouble-free operation of three-dimensional welding, but also for the forming accuracy.
介绍一种等离子熔射法成形件的孔隙率测定方法、原理与步骤，并讨论与之相关的问题。
In this paper, the principle and procedure of the method, measuring porosity of the plasma spray forming parts, are introduced. Some questions referring to the process are discussed.
为得到精确的成形件，在成形面造型时必须基于弹性垫的变形对基本体群成形面进行修正。
To obtain the exact object shape, the forming surface of MPF must be corrected based on the deformation of elastic cushion.
在多点成形过程中，3维曲面形状的离散傅里叶变换描述能够反映成形件的整体变形特性。
With Discrete Fourier Transforms description of 3d curved surface, transform function of forming process is discussed.
该文针对冲孔、翻孔两类板材冲压成形工艺方法的主要特点，设计了两类成形件的特征识别规则。
Based on main characteristics of punching and flanging process, this paper describes the design of rules to stamping features.
采用多点模具拉形时，由于弹性垫的使用，拉形后成形件的回弹量与使用整体模拉形时有所不同。
Because clastic cushions are used in stretching based on multi-point die, the springback in this process is different from that in traditional solid die stretching process.
该装备具有结构简单、经济实用、可实现变压边力控制等特点，可获得高质量的复杂板料成形件。
The equipment has simple structure, is economical and practical and with variable blank holder force. High-quality complex sheet parts can be produced with this equipment.
接着为了达到所期望的最终形状或所期望的含有余量的最终形状使接合的成形件加工成相应的形状。
The joined moulded parts are subsequently machined to achieve the desired final geometry or a geometry corresponding to the desired final geometry plus the machining allowance.
在对模拟成形件进行成形特征分析的基础上，研究了特定成形方式下材料参数对冲压成形性的影响规律。
On the basis of analysis of the forming characteristics of rectangular cup, the influence of material parameters on formability under certain forming mode has been studied.
为了制造复杂的部件建议，将至少两个半成品成形件或者以毛坯或者在至少部分地碳化以后材料连接地接合。
In order to manufacture complex components, it is suggested that at least two semi-finished moulded parts are firmly joined either in raw form or after at least partial carbonisation.
此方法对于复杂的拉深成形件和复杂的覆盖件的进一步研究更有实际意义，有利于提高产品质量和降低成本。
The results show that the new approach is a better method for optimum blank design. The product quality will be improved and the cost will be reduced by this new approach.
也可以选择在非氧化气体氛围中通过渗金属过程在同时使至少两个成形件反应接合时将它们转换成CMC复合材料。
Alternatively, these can be converted into a CMC composite material in a non-oxidizing gas atmosphere by a metal infiltration process with simultaneous reactive joining of at least two moulded parts.
板料成形过程中工艺辅助面对成形件质量有着重要意义，但其设计非常费时并且需要根据实验和数值模拟结果不断修正。
The addendum surfaces are very important for the product quality in sheet forming process, but their design is very time-consuming and requires tedious trial-error corrections.
结果表明：变形铝合金半固态模锻成形件经新工艺处理后，力学性能明显提高，缩短了处理时间，节约了能源，提高了生产效率。
The results show that the mechanical property of semi-solid drop-forgings is improved obviously, its processing time is shortened, the energy is saved and the production efficiency is also improved.
针对多点成形件成形误差检测中的三维数据配准问题，提出了一种用两步法将CAD模型数据和三维测量数据点全局配准的方法。
In this paper, a new method for the global registration of the CAD modeling data to the 3d measured data is presented.
将模拟结果同实际成形件厚度比较，通过极差分析，得出上述因素对前翼子板成形的不同影响，其中压边力、虚拟凸模速度对成形影响较其他因素大。
Then the result was compared with actual thickness value of forming part. Through the analysis of range, the effect of above elements on the forming of front fender was obtained which in...
一些零部件用的是碳纤维，还有一些采用了玻璃纤维成形。
Some parts are built using carbon fibre, other bits from glass fibre.
看到书成形是很令人兴奋的一件事。
但对成形量小的浅拉延件，传统的圆网格法已不能满足要求。
Nevertheless, traditional circular grid method is no longer applicable for shallow stretching components with small forming capacity.
我厂以生产各种型号的卷板机为主，同时也对外大批量生产机械零部件和成形物品的焊接。
I plant to produce various types of coiling machine mainly, but also external mass production machinery parts and components and materials forming the welding.
我厂以生产各种型号的卷板机为主，同时也对外大批量生产机械零部件和成形物品的焊接。
I plant to produce various types of coiling machine mainly, but also external mass production machinery parts and components and materials forming the welding.
应用推荐