热电堆红外探测器是最早研究并实用化的热电型红外成像器件之一。
Thermopile ir detector is one of the first thermal ir imaging device that has been studied and applied.
红外焦平面成像器件的光谱响应率是天基红外遥感的基本物理指标。
The spectral responsivity of IRFPA imaging detector is a basic physical parameter for the space infrared remote sensing.
数字成像器件模型及标定和高精度亚象素定位技术是数字摄影测量中的核心技术。
Digital imaging device model and the calibration and high precision sub-pixel positioning is the core technology in digital photogrammetry.
随着大动态范围热成像器件的广泛使用，有必要研究适合人类视觉特性的红外热像终端显示系统。
With popularization of large dynamic range IR thermal imaging system, it is necessary to study IR-image-display terminals which suit for human visual properties.
夜视成像器件是夜视系统的关键部件，因而，我们应当把着重点放在夜视成像器件的研究与开发上。
The night vision imaging device is a key component for night vision systems, therefore, we must place emphasis on the research and development of the image intensifiers.
因此，原生4K信号必须被压缩才能在这种成像器件上显示，而在4k DLP芯片上则无需压缩。
Therefore a native 4k signal needs to be compressed to be displayed on these devices, where it does not on the 4k DLP chip.
迄今为止，人们已经提出了诸如刃边法、激光散斑法、扩展频率孔径法等多种测量离散成像器件MTF的方法。
So far people have put forward some basic methods for evaluate the MTF values of the lens, such as knife-edge method, laser speckle method and extended frequency aperture (EFA) method.
铁电陶瓷薄膜红外热探测器是一种无致冷的红外探测器。由于它具有很高的灵敏度，是一种很有潜力的热成像器件。
Ferroelectric ceramic thin film infrared detector is an uncooled infrared thermal detector that has great application potential for thermal imaging devices, owing to its very high sensitivity.
在固体成像器件中嵌入可控的全固态电荷雪崩倍增寄存器，使信号电荷在读出过程中得到雪崩增强，实现高灵敏度成像探测。
The all-solid charge avalanche multiplying registers are incorporated into the device, and signal charges are multiplied during the readout process. Thus the gaze-imaging is realized.
基于随机并行梯度下降（SPGD）算法，32单元变形镜，CCD成像器件等建立了无波前传感自适应光学系统实验平台。
Based on stochastic parallel gradient descent (SPGD) control algorithm, an adaptive optics test-bed without a wave-front sensor was built with a 32-element deformable mirror and a CCD.
指出在没有高空间分辨率成像器件的情况下，利用微扫描技术和低分辨率成像器件来获得较高空间分辨率的图像是完全可能的。
The result shows that the micro-scanning technology can increase the focal plane spatial resolution, decrease the image aliasing effectively and improve the imaging quality significantly …
该系统采用大面阵CMOS图像传感器作为成像器件，通过反射镜扫描进行像移补偿的方法，实现无人机飞行状态时清晰地数字成像。
This system USES large area array CMOS sensor as the image device, and makes the image motion compensation by reflector scanning, thus to obtain clear digital images during flight of UAV.
同时，本项目的研究成果，为以后嵌入式系统的研究搭建了一个软硬件平台，为电场成像器件MC33794在其它领域的实际应用奠定了良好的基础。
The result of this item sets up a hardware and software platform for the embedded system study and provides the bases for other applications of electric field imaging device MC33794.
CMOS图像传感器作为固态图像传感器的重要分支，在功耗和可集成性方面具有明显优势，因而逐渐取代了CCD图像传感器成为数字成像器件的主流。
CMOS image sensor, which is a important branch of the solid-state image sensor, have more and more advantage in power assumption and integratability to replace the leadership of CCD image sensor.
TL V器件推动了经济可承受的下一代红外成像设备的实现，下一代红外成像设备将极大扩张热成像市场。
The TLV enables a new generation of affordable infrared imaging devices that will expand the market for thermal imaging.
这些器件得到的结果是一个影像阵列，阵列中每一个影像的成像角度都略微有些不同。
The result is an array of images, each formed from a slightly different perspective.
数字投影显示已成为现代数字显示领域的主流，阵列像素器件投影成像的的精确会聚，直接决定了显示的效果。
Digital projection display has become the mainstream in modern display field. Accurate focusing of the array pixel devices in these systems determines the quality of the displaying effect.
采用具有电荷累积功能的面阵CCD器件，电荷累积与数字累积相结合的方法，提出了可获得更大范围量程的CCD成像型亮度计系统。
CCD imaging luminance meter of wider range measure is obtained by using CCD with the function of charge cumulation, using methods of charge and digital cumulation.
电子发射器件，电子源基片，成像设备及其生产方法。
Electron-emitting device, electron source substrate, imaging apparatus and production method thereof.
氢化硅薄膜由于在红外成像传感器、太阳能电池及薄膜晶体管等微电子器件中有着广泛应用前景而备受关注。
Hydrogenated silicon film attracts extensively attention due to its application on many kinds of microelectronic devices, such as infrared imaging system, solar cell and thin film transistor.
用红外热成像系统直接获得的热像图，是被测器件表面辐射温度的分布，并不是真实温度的分布。
The thermograph obtained by a thermal imaging system is only the distribution of radiant temperature of the surface of measured devices, not the true temperature.
在成像系统当中，我们用镜头和光敏器件组成照相机来模拟人类视觉观察世界的方式。
In an imaging system, we build a camera having a lens and a photosensitive device, to mimic how the world is perceived by vision.
在成像体系当中，咱们用镜头跟光敏器件组成照相机来模仿仁攀类视发觉看世界的方法。
In an imaging system we build a camera having a lens and a photosensitive device to mimic how the world is perceived by vision.
该文讨论了在合成孔径雷达实时成像处理器中，采用子孔径带通滤波成像处理方法的方位预处理的设计，构造了一种用大规模可编程逻辑器件实现方位预处理的电路结构。
This paper describes the design and realization of the azimuth preprocess in the real-time imaging processor of SAR with programmable logic device by the method of sub-aperture using band-pass filter.
本研究结果为制造可在近红外光区实现多光谱成像的BCCD器件提供了重要的理论依据。
This research is helpful for the fabrication of BCCD which can realize multispectral imaging in the region of near-IR.
本文设计了新型的X光成像系统，它的核心部件X光影像增强器是一个混合型器件。
A novel X-ray imaging system was designed and its key device is X-ray image intensifier tube, which is a vacuum and non-vacuum mixed device.
多模干涉(MMI)耦合器需要精确定位成像位置，以便器件的设计制作。
In order to design and make multimode interference (MMI) couplers, the imaging positions must be located accurately.
红外焦平面阵列(IRFPA)是红外成像技术中获取红外图像信号的核心光电器件。
Infrared focus plane array (IRFPA) is the critical part of image technology to acquire infrared image signal.
介绍了激光辅助照明主动红外成像系统的基本原理和组成、激光光源的制作和技术参数、光学系统和接收器件的选用。
The fundamental theories and structure of the active IR imaging system with laser illumination, the manufacturing techniques and technical parameters of laser sources were presented.
介绍了激光辅助照明主动红外成像系统的基本原理和组成、激光光源的制作和技术参数、光学系统和接收器件的选用。
The fundamental theories and structure of the active IR imaging system with laser illumination, the manufacturing techniques and technical parameters of laser sources were presented.
应用推荐