通过深紫外光刻和感应耦合等离子刻蚀设备，制备了所设计的器件。
The designed SOI nanowire AWGs were fabricated using ultraviolet lithography and induced coupler plasma etching.
应用接地和屏蔽措施，抑制传输线向其周围的辐射和电磁感应耦合；
Taking the effective measures of grounding and shielding, we restrain the radioactive and electro magnetic coupling around wire. Adopting the technology of zero voltage grounding in …
利用并行直写技术与感应耦合等离子刻蚀技术制作了部分二元光学元件。
Some binary optical elements were manufactured by parallel direct writing and inductive couple plasma etching technology.
另一种能量传输的方法，称为“感应耦合”，因为需要插电，所以并不能算作完全的无线传输。
Another way of transferring energy, called “inductive coupling”, is not so much wireless as plugless.
本文提出了一种新的利用发射光谱测量感应耦合氮等离子体的电子温度的诊断方法。
A new diagnostic method using optical emission spectroscopy to determine electron temperature in inductively coupled nitrogen plasma is proposed.
目前，国内外广泛应用的RFID系统是基于感应耦合负载调制技术的近距离高频读写系统。
At present, proximity high frequency RFID (Radio frequency Identification) system based on inductive coupling load modulated technology is used worldwide.
采用感应耦合等离子体刻蚀技术实现了不同形状和几何参数的规则织构化硅片表面的构筑与制备。
Regular textured silicon surfaces with various shape and different geometrical parameters were successfully designed and prepared using inductively coupled plasma (ICP) etching technology.
利用电子束光刻、等离子体增强化学气相沉积、感应耦合等离子体刻蚀来实现跑道型微环谐振器的制备；
The optical part can be done by applying Electron Beam Lithography (EBL), Inductively Coupled Plasma (ICP) etching, and Plasma-enhanced Chemical Vapor Deposition (PECVD).
原子谱线和离子谱线特性分析表明，在鞘层附近区域感应耦合等离子体具有较高的离子密度和较低的电子温度。
It was shown that the ion density is higher and the electron temperature is lower in the vicinity of inductively coupled plasma sheath according to the ionic line and atomic line.
本发明公开了一种感应加热装置(20)，它具有：电源(22)、感应耦合组件(30)以及电感铁心(38)。
An inductive heating device (20) is disclosed having a power supply (22), an inductive coupling assembly (30), and an inductor core (38).
感应耦合等离子体触角安装在介电窗上以便定位在介电窗的中心上，并且将来自射频电源的射频功率传输到加工室内部。
An inductively coupled plasma antenna, which is installed on a center of the dielectric window, transfers radio frequency power from an RF power supply to the interior of the processing chamber.
本文介绍一种用于感应耦合等离子体-原子发射光谱法的钽舟电热蒸发进样装置，介绍了该装置的电路设计、蒸发室系统。
The electric system and evaporation chamber of a tantalum capsule electrothermal evaporation sample introduction device for ICP-AES are described.
非接触移动供电系统(CMPS)是一种基于电磁感应耦合原理实现电能从静止电源系统向移动用电设备传输的新型供电系统。
Contactless mobile power supply (CMPS) system is a novel power supply system which can realize power transfer by magnetic couple between static power system and mobile electric facilities.
本文着重研究了因近场感应电压相位差引起的耦合误差，以及近场天线差斜率变化引起的定向灵敏度的变化；
This paper mainly studies the coupling error caused by induction voltage phase difference, and fluctuation of directional sensitivity caused by changes in near-field difference slope.
松耦合变压器是非接触感应电能传输系统中的关键部分。
Loosely coupled transformer is a key part in contactless inductive power transfer system.
这部分电路的作用是通过接收线圈耦合感应出体外发射来的信号，然后再解调出两路原始信号传输给刺激电极。
The role of circuits in this part is to sense signals sent in vitro through receiving coil coupling, and then two paths of primary signals are demodulated to be transmitted to a stimulation electrode.
基于相邻交叉耦合控制结构，采用全滑模面控制方法，提出了一种多感应电机速度同步控制策略。
A speed synchronization control strategy for multi induction motors, based on adjacent cross-coupling control structure, is developed by employing total sliding mode control method.
并在该模型的基础上，分析了耦合器漏感与励磁电感对感应充电系统的影响，设计制作了实验系统耦合器。
Based on this model, the paper analysed the influence of magnetizing inductance and leakage inductance on inductive charging system, then designed the coupler of inductive charging experiment system.
对于直线感应加速器的束位置探测，钮扣电极这种电容耦合型探测器是一种新的束流诊断手段。
The button electrode based on capacity coupling is a kind of new Beam Position Monitor to Linear Induction Accelerator.
该控制装置是耦合至该感应装置，依据一预定的表格，以对该二维阵列的像素值进行调整，以便达到对该二维阵列的感应元件的遮光补偿效应。
Said control device is coupled to the inducing device to regulate the pixel value based on a preset chart to reach the shading compensation effect to said 2-d array inducing elements.
该控制装置是耦合至该感应装置，依据一预定的表格，以对该二维阵列的像素值进行调整，以便达到对该二维阵列的感应元件的遮光补偿效应。
Said control device is coupled to the inducing device to regulate the pixel value based on a preset chart to reach the shading compensation effect to said 2-d array inducing elements.
应用推荐