最后给出该系统的CAN总线通信协议。
In the end, the CAN bus communication protocol of the system is provided.
本文实现了一种基于CAN 总线控制器SJA1000的自动络筒机通信系统方案，并对CAN总线通信协议及SJA1000的基本原理结构、功能特点进行了描述。
This paper realizes a communication system scheme for auto-winder based on CAN-bus controller SJA1000. The communication protocols of CAN-bus, and the principle and functions of SJA1000 are described.
本文介绍FPDP总线的通信协议和基于TS-101处理器的通用信号处理板的板间FPDP总线通信方式的设计与实现。
This paper introduces the protocol of FPDP bus and the design of FPDP bus of general signal processing boards with TS-101 processor.
简述了一种基于CAN总线的电梯轿厢控制器，介绍了该控制器的功能、结构及其软硬件和通信协议的设计方法。
An elevator car controller based on CAN bus is described. The functions, architecture, hardware and software and the communication protocol designing methods of this controller are introduced.
本文首先介绍了现场总线CAN通信协议。
Introduce the communication agreement of field bus CAN at first.
CAN总线是一种串行数据通信协议，由于其卓越的性能、极高的可靠性、独特灵活的设计和低廉的价格而越来越受到人们的重视。
CAN bus is a serial data communication protocol. It is regarded highly because of its excellent performance, high reliability, flexible design and low price.
因此研究开发基于PCI总线接口和通信协议的超大规模集成电路芯片是具有应用前景和市场价值的。
Therefore, it will have a bright future to develop VLSI chip based on a PCI bus and related a communication protocol.
针对汽车电子控制系统和车载多媒体系统，探讨了汽车总线系统通信协议的技术特点和发展趋势。
As to automotive electronic control systems and on-board multi-media systems, the technical features and development trend of communication protocols of automotive bus line systems are discussed.
本文详细讨论了一种基于RS- 485总线的通信协议，并用有限状态机模型对其可靠性做定性分析。
In this paper, a communication protocol based on RS-485 bus is discussed in detail, and the qualitative analysis of its reliability using the finite state machine model is given.
为达到此目标，现场总线网络从硬件和通信协议上对传统网络作出了改进。
Aiming at this goal, it improves its hardware and communication protocol from traditional computer networks.
熟悉汽车CAN总线的通信协议和信息内容对于汽车故障维修以及进行汽车网络技术方面的应用研究具有重要意义。
Be familiar with the communication protocol and information content of automobile CAN-Bus, which is very important to automobile maintain and application research of automobile network technology.
本文以通用串行总线为设计基础，分析并讨论了USB的体系结构、通信协议等核心技术。
With the commonly used serial bus as design basis, the kernel technologies, e. g., architecture and communication protocol of USB are analyzed and discussed.
此外，本文还改善了基于RS- 485总线的串口通信协议，并实现了这种协议的应用程序。
Besides, the paper also improves a serial communication protocol based on RS-485 data bus, and realizes the application.
通过分析CAN总线和RS 485总线的特点，设计了CAN总线多功能集中器和网络通信协议。
After analyzing the features of CAN bus and RS-485, multifunctional concentrator and network communication protocol is designed.
主要包括基于usb总线的CAN适配器、CAN总线网络模型和通信协议的设计。
The CAN communication adapter base on USB bus, the network model and communication protocol of CAN bus are explained briefly.
下位机利用凌阳十六位单片机SPCE061A和CAN总线控制器SJA1000实现电力参数的采集、控制输出，及通信协议转换。
Lower machine realizes the collection, control output of power parameter and communication protocol conversion by using the 16-bit MCU named SPCE061A of Sunplus Company and CAN bus controller SJA1000.
前端数据采集装置和后台上位机之间数据通信采用RS485总线，设计了RS485通信接口电路和通信协议。
The data communicating between the data sampling unit and the computer adopts RS485 fieldbus. At the same time, the communication protocols and RS485 communication interface are designed.
最后通过参考sae J 1939应用协议拟订初步通信协议，并进行实验台CAN总线网络实现通讯测试。
Finally, according to the SAE J1939 Application protocol, a primary communication protocol is drafted, and an experimental CAN Bus network is constructed to implement communication testing.
本系统主要包括GPS同步时钟和通信协议转换模块，二者之间通过RS- 485总线进行连接。
The GPS synchronous clock and the conversion devices are linked up with RS-485 bus.
在参考osi网络通信协议模型与多种国外家庭自动化总线的基础上，构建一个完整的分层的基于低压电力线的通信协议模型。
Constructing a full layered communication protocol module, with reference to the network communication protocol model of OSI and overseas home automation bus.
介绍了一种基于CAN总线的分布式工业机器人控制器的研究开发情况，实现了总线与各模块的接口设计，并制定出相应的机器人控制器内部通信协议。
This paper introduces a kind of industrial robot based on CAN and implements the interface between the communication bus and the system's modules. It also brings forward communication protocol.
介绍了CAN总线的技术特点、通信协议和应用范围，并给出了CAN总线系统的设计实例。
This paper focuses on the features, communication protocol and use ranges of CAN bus. A practical example of CAN bus system is impemented.
数据格式依赖于通信协议的实现，本系统中采用了CAN总线和以太网两种通信方式，对它们设计了不同的数据封装格式。
Data formatting depends on the realization of communication protocol. Our system brings in two different communication methods, including CAN and Ethernet.
基于总线体系结构、通信协议、性能以及应用场合对MIC总线和1553B总线进行了综合分析与比较。
MIC bus and 1553b bus are discussed and compared comprehensively according to the features such as architecture, communication protocol, performance and application fields, and so on.
编程实现了整个焊接系统的数字化控制篙详细说明了CAN总线电路的设计、CAN总线的通信协议设计。
Programming realized the CO2 welding systems of digital control. Based on CAN bus circuit, the CAN bus communication protocol design is discussed in more detail.
编程实现了整个焊接系统的数字化控制篙详细说明了CAN总线电路的设计、CAN总线的通信协议设计。
Programming realized the CO2 welding systems of digital control. Based on CAN bus circuit, the CAN bus communication protocol design is discussed in more detail.
应用推荐