令牌总线网与令牌环网非常相似。
A token bus network is very similar to a token ring network.
设计了RS485总线网络通讯协议。
因此，树网络是一个总线网络明星网络。
然后基于这个模型设计了CAN总线网络化传感器。
Then a CAN bus networked sensor is designed based on this model.
PROFIBUS现场总线网络层采用屏蔽双绞线连接。
The shield twisted-pair was used to link with PROFIBUS field bus network layer.
在总线网络中，所有的通讯装置都与一条共同的电缆相连。
In a bus network, all communications devices are connected to a common cable.
最后，总结出CAN总线网络在汽车上应用的优势和缺陷。
Finally, summarizes the CAN bus network in the car on the use of its advantages and disadvantages.
文中介绍了CAN总线网络在控制系统中的结构，并说明各部分的意义。
In the thesis, the structure of the CAN network in the control system is introduced and the functions of every part is explained.
阐述了系统的硬件构成和软件模块的设计及CAN总线网络接口的实现。
The composition of the system hardware and the design of software blocks and the achievement of CAN interface are described.
采用CAN总线网络通信与集成技术，完成分布式远程控制和故障诊断。
Uses the CAN-Bus network correspondence and the integrated technology, completes the distributional long-distance control and the breakdown diagnosis.
为达到此目标，现场总线网络从硬件和通信协议上对传统网络作出了改进。
Aiming at this goal, it improves its hardware and communication protocol from traditional computer networks.
在基金会现场总线网络中，设备之间通过虚拟通信关系VCR来传送信息。
Devices in the FF network can communicate with each other through VCR.
本系统设计可应用在其他CAN网络中，也可以应用于其他总线网络的数据采集。
This system design can be applied in other can as well as in data acquisition of other bus networks.
CAN总线网络的可靠性历来是CAN总线网络设计时需要考虑的一项重要指标；
The reliability of the CAN bus is always an important guide line for the CAN bus design.
主要包括基于usb总线的CAN适配器、CAN总线网络模型和通信协议的设计。
The CAN communication adapter base on USB bus, the network model and communication protocol of CAN bus are explained briefly.
给出了一种采用单片机驱动pci总线网卡以实现串行设备与以太网连接的设计方案。
A design was proposed, which drives PCI bus nic by adopting single chip microcomputer to realize the connection between serial communication equipments and Internet.
介绍了基金会现场总线网络的基本结构和构成总线网络的主要部件以及各自的技术规范。
The basic configuration and main components of the Foundation Fieldbus network and their respective technical criterion is introduced.
在测控网络的设计中，提出了一种基于USB接口的CAN总线网络适配器的设计方案。
And this paper brought forward one kind of design method on CAN BUS network Card Based on USB Interface in the measurement-control network of design.
在众多汽车网络标准的主流协议中，本设计采用了高性能、低成本的CAN总线网络协议。
In the design, the protocol of CAN Bus network with high performance and low cost is adopted among many main protocols of automotive network standard.
说明：大家见过以太网、总线网、无线网，但是很少接过232组网吧，送上一个参考方案。
We have seen Ethernet, bus network, wireless network, but few Internet cafes take over 232 groups, sent a reference program.
它采用分布式的结构，包括一个接口计算机和数个I／O接口机箱，形成一个现场总线网络。
It adopts distribution pattern, which composes of one interface computer and several I/O interface crates, organizing a Field Bus network.
介绍了一种对CAN总线网络资源进行分布式调度的机制，满足分布式实时系统的实时性要求。
Introduced a mechanism to implement distributed scheduling for the CANBus resource in order to meet the requirement of a dynamic distributed real-time systems.
论文详细阐述了卷烟储存输送设备PROFIBUS- DP总线网络的组成结构和设计过程。
Composition and design process of general line network of cigarette storage transmission equipment PROFIBUS-DP is stated.
本文提出了一个构建在现场总线网络之上，采用PLC作为控制单元的变电站自动化系统的实现方案。
This paper presents a substation automation system based on Fieldbus where PLC is used as the control unit.
针对有线工业HSE现场总线网络中存在的问题，提出了一种基于无线蓝牙技术的传感器网络解决方案。
The paper presents a sensor network solution based on wireless bluetooth technology according to the problems in wired industrial HSE Fieldbus.
此竞争总线网络协议是采用单芯片微控制器8396和LAN处理器芯片82586的连接技术实现的。
Single chip microcontroller 8396 and the chip LAN coprocessor 82586 are incorporated to implement the network protocol.
变电站间隔层的保护测控单元可以通过网络交换信息和数据，因而CAN总线网构成了高效率信息、数据网络。
With high efficiency of CANbus network, the protection & monitor units of substation bays can exchange information through the network quickly to achieve data sharing in substation automation systems.
最后通过参考sae J 1939应用协议拟订初步通信协议，并进行实验台CAN总线网络实现通讯测试。
Finally, according to the SAE J1939 Application protocol, a primary communication protocol is drafted, and an experimental CAN Bus network is constructed to implement communication testing.
最后通过参考sae J 1939应用协议拟订初步通信协议，并进行实验台CAN总线网络实现通讯测试。
Finally, according to the SAE J1939 Application protocol, a primary communication protocol is drafted, and an experimental CAN Bus network is constructed to implement communication testing.
应用推荐