系统实现了电源模块的设计，提供主电源和备用电源两种方式，同时具体完成了以太网模块、存储电路、总线接口模块等的设计。
This article realizes the design of power module which provides two ways for power: main power and backup power, and completes the design of Ethernet module, and storage module.
加密卡是基于计算机总线接口的、提供密码服务功能的硬件模块。
Cipher Card is a hardware module based on bus interface of computer and offering cryptogram service function.
该系统从功能上可以分为数据采集模块、无线数据传输模块、通用串行总线接口传输模块。
The system can be divided into three modular by function, sensing data acquisition part, wireless data transmitting part, and universal serial interface part.
对PCI -AHB接口和PCI总线操作进行了介绍，详细分析了PCI—AHB桥接模块的结构设计。
Introduce the PCI-AHB interface and PCI local bus operation, especially analyse the architecture of PCI-AHB bridge module.
该模块具有RS-422总线接口与两路PAL制式复合视频输出端。
This module has a RS-422 interface and two standard PAL TV video output channel.
采用CAN总线作为模块间的通信接口，有效地支持了多关节实时控制。
CAN bus is introduced as the communication interface for different modules and it supports the multi joints 'real-time control effectively.
开发了US B接口模块并实现了基于USB总线的PC B功能测试系统。
Developing USB interface module successfully and realizing PCB function test system based on USB.
介绍了一种基于串行接口和I2C总线接口，固化了汉字字库的液晶显示器模块的设计和实现方法。
This thesis introduces the design and solution of liquid crystal display module based on serial interface, I2C bus interface and solidification Chinese word library.
详细介绍了CAN/LIN总线技术在灯控模块中的应用，完成了CAN和LIN的网关设计，并给出了CAN/LIN总线的硬件接口电路和软件设计思想。
This paper introduces the CAN/LIN bus' application in the light's control module, the design of the CAN/LIN gateway is finished, and the hardware interface circuit and the software idea are given.
其设计包括不同数据节点的CAN控制器，及单片机控制的CAN接口模块和基于DSPTMS320 LF 2407a的CAN总线接口等。
The design includes designs of different can controllers for different data nodes, the can module controlled by single chip computer and can bus interface based on DSP TMS320LF2407A, etc.
系统硬件采用了嵌入式PC、通讯接口卡和现场总线数据采集模块。
The hardware is constructed with embedded PC, communication card and field bus data acquisition module.
AHB总线接口设计划分为主控模块接口设计及从模块接口设计。
As the basic SoC design technique, the AHB bus interface design consists of master module interface design and slave module interface design.
阐述了系统的硬件构成和软件模块的设计及CAN总线网络接口的实现。
The composition of the system hardware and the design of software blocks and the achievement of CAN interface are described.
该接口卡FPGA芯片内部VHDL程序含：ISA总线与FPGA接口、串行异步通信发送及接收模块。
The VHDL program embedded in the FPGA chip includes: interface combine ISA bus and FPGA, serial asynchronous communication module for transmitting and receiving.
软件设计分为三个模块：CAN总线设备接口通信模块、透明网关协议转换模块和以太网层应用模块。
For the software design, it's composed of three modules: CAN bus equipment interface communication module, purify gateway protocol transform module and Ethernet application module.
本文介绍了基于SPI总线模块ZLG7289A的人机接口设计。
This paper presents a design of human computer interface based on SPI-bus module ZLG7289A.
对于VME总线，用户可以根据特定要求自行设计接口电路，比如只实现从模块访问。
For VME bus, users themselves could design interface circuit according to particular demand such as only slave interface.
介绍了一种基于CAN总线的分布式工业机器人控制器的研究开发情况，实现了总线与各模块的接口设计，并制定出相应的机器人控制器内部通信协议。
This paper introduces a kind of industrial robot based on CAN and implements the interface between the communication bus and the system's modules. It also brings forward communication protocol.
将usb总线和光栅测距结合于一体，设计了一种基于USB接口的光栅信号处理系统。该系统采用软、硬件结合的方法，具有模块化和多用化的特点。
In this paper, a system of grating signal processing based on USB is designed, which is characterized with modular and multiple use by means of combining software and hardware.
给出了一种基于FPGA实现PCI总线目标模块接口控制器的设计方案，用时序状态机来实现总线访问操作复杂的时序。
PCI target interface controller design with FPGA is proposed. And the realization of the complication of the access sequence to the BUS interface controller is expressed by sequence state machine.
介绍了通用串行总线模块usb10 0模块的基本特点和使用方法，并给出了USB10 0与单片机的硬件接口电路和通信程序源代码。
The fundamental characteristics of USB100 and its application are introduced. The interface circuit between USB100 and MCU is given, and the source code of communication program is listed.
介绍了通用串行总线模块usb10 0模块的基本特点和使用方法，并给出了USB10 0与单片机的硬件接口电路和通信程序源代码。
The fundamental characteristics of USB100 and its application are introduced. The interface circuit between USB100 and MCU is given, and the source code of communication program is listed.
应用推荐