第四章讨论总线管理，阐述了数据传输、流量控制和差错控制在网络式仪器总线中的实现。
In chapter four, describes the bus management, and discussed the implementation of data transfer, flow control and error control in the network-stye instrument bus.
该系统利用嵌入式网络和并行总线技术可稳定可靠地实现数据的快速获取与给定。
This system makes use of the embedded network and bus runs side technology to achieve the stabilization and dependable accessed and provided data.
第二章阐述网络式仪器总线硬件平台的设计。
In chapter two, describes hardware system design of the network-stye instrument bus.
单总线技术是使用一根数据线与一根返回线实现数据通信的主从式网络。
Single bus technology is a master-slave network with data communication by both a data line and a return line.
现场总线的CAN，是一种开放式互联网络，支持多组实时、分布式控制串行通讯。
As the field bus, CAN is an open interconnect network, which supports multiple-group, real-time and distributed control on series connection communication.
CAN总线是一种有效支持分布式控制和实时控制的、多主的异步串行通信网络。
Can bus is a kind of network of the asynchronous serial communication that can effectively support the distributed control and the Real_time and the multi-master control.
在现有某钢铁公司热轧板厂基础自动化的基础上，设计开发了一套基于RS485总线网络分布式热轧机组轧制过程质量监视与设备故障诊断系统。
On current basic automatic system of hot strip plant, a new quality monitoring and equipment diagnosis system based on RS485 field bus network of rolling process is designed and developed.
它采用分布式的结构，包括一个接口计算机和数个I／O接口机箱，形成一个现场总线网络。
It adopts distribution pattern, which composes of one interface computer and several I/O interface crates, organizing a Field Bus network.
CAN总线是一种串行通讯协议，适用于分布式控制系统的底层网络通信。
CAN bus is a serial communication protocol and ADAPTS to bottom layer communication of distributed control system.
详细描述了系统的特点和要求、分级分布式系统结构和以位总线为基础的数据通信网络。
The characteristic and requirement of the system, the distributed system structure and the data communication network which is based on the bit bus are described in detail.
系统采用半双工式RS- 485总线型通信网络和累加和校验通信算法进行数据传输。
System adopts RS-485 bus communication network which way of communication is half duplexing and accumulate and check-up communication algorithm, which are carried on data transmission.
基于CAN总线技术建立了车载分布式实时控制器局域网络。
Based on CAN bus technique, a distributed realtime controller local network for car is established.
作为现场总线的CAN，是一种开放式互联网络，用以支持多主实时、分布式控制串行通信。
CAN used as the field bus is an opening network for supporting a multiple-master real-time and distributed controlling serial communication.
伴随着嵌入式软硬件技术的迅猛发展，将嵌入式技术与CAN总线网络技术相结合，提出了嵌入式车载网络系统的概念。
As the rapid development of the embedded system technology. The embedded-tech combined with CAN_BUS network system brings forward the concept of embedded Automobile network system.
现场总线是连接现场设备和自动化系统的数字式、双向传输、多分支结构的通信网络。
Fieldbus is a digital, bi - directional, poly - branched communication network connecting field devices in automation control system.
介绍一种用VB工具软件开发集散型控制系统的方法，并用主从式通信控制方式解决了通信网络中的总线竞争问题。
This paper introduces means to develop a distributive control system with VB language. With main follow control manner, the problem of bus competition is overcomed.
介绍了列车通信网络的两条总线，即绞线式列车总线（WTB）和多功能车辆总线（MVB），并分析了两层网络拓扑结构。
This paper introduces two buses of train communication network:the wire train bus(WTB) and the multifunction vehicle bus(MVB), analyzes two layers topo.
文章介绍了1553B总线的特点，基于1553总线设计的嵌入式网络节点类型和网络结构。
This paper introduces the characteristics of 1553b bus, and the nodes' functions and network structure based on 1553b bus.
首先针对网络控制系统分布式的特点，特别是类似于CAN总线的多主系统，由于没有单一的时钟提供同步机制，影响调度管理的同步。
First, aiming at the distribution of NCS, specially the multi-master system such as CAN, there is no unified network clock, so the scheduling and management are affected.
分布式仿真系统可采用的联接方式主要有物理共享内存总线、消息传递网络和复制共享内存网络三种。
Physical Shared memory bus, message translating LAN and copy Shared memory network are the main interconnecting technology using in distributed real-time simulation.
介绍了一种对CAN总线网络资源进行分布式调度的机制，满足分布式实时系统的实时性要求。
Introduced a mechanism to implement distributed scheduling for the CANBus resource in order to meet the requirement of a dynamic distributed real-time systems.
为了将嵌入式PC机联人CAN网络，设计了一种既具有CAN总线接口又具有PC- 104总线接口的适配卡。
In order to link embedded computer to CAN bus, an adapter card with CAN bus interface and PC - 104 bus interface has been designed.
首先，论文提出了一种基于低压电力线载波技术的总线式控制网络。
Firstly, this paper advanced a control system based on the low-voltage power line carrier.
采用CAN总线网络通信与集成技术，完成分布式远程控制和故障诊断。
Uses the CAN-Bus network correspondence and the integrated technology, completes the distributional long-distance control and the breakdown diagnosis.
其次，考虑到网络计费系统分布式应用的趋势，将计费系统的各个功能模块集成到CORBA软总线上，使计费系统功能模块架构具有开放型和扩展性。
Then function modules of accounting system are integrated on CORBA soft-bus and had the performance of opening and expandability to match the trend of distributed application demand.
提出了一种基于CAN总线的智能阀门网络控制系统，在中小型过程控制系统中可实现分布式的网络控制。
A novel intelligent valve network control system based on can field bus are introduced in this thesis. Distributed network controller can be completed in medium and small-type process control system.
通过CAN总线，监控主机和电机驱动节点可直接进行通信，形成分布式网络，简化了系统结构，实现多电机的分散安装和集中控制功能。
Via CAN-BUS, the monitor host computer and these nodes of driving motor can communicate with each other directly, like a distributed network. The system structure is more concise.
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
文章介绍的CAN总线控制系统实现了多视觉传感器的分布式网络化控制，尤其适合对实时性、可靠性和精度等要求较高的大型多传感器视觉测量系统的实时控制。
Based on CAN bus control system, distributed network control of multiple visual sensor was realized. It specially suitable to realtime control of large scale multiple sensor visual...
应用推荐