第五章给出了系统的总体框图及总电路图。
Chapter V gives the block diagram and the circuit diagram of the overall system.
采用一个紧凑集总电路模型来等效模拟集成化电感的电路效应。
A compact lumped model is used to simulate the characteristic of the integrated inductance.
传统的EDA设计中的基于集总电路概念的参数提取算法已经失去准确性。
The traditional methods of parasitic parameter extraction in EDA, which based on the concept of lumped component, have lost their accuracy.
目前实验室测量岩石复电阻率一般都采用集总电路模型，没有考虑测量电缆的影响。
The Resistivity measurements of rock in lab are generally based on the lumped circuit model, so the effect of cable is usually neglected.
论述WB型直流电压变送器的工作原理、完成转换的各个模块电路的作用及变送器总电路的特点。
The work principle of the WB-type DC voltage transmitter, the functions of each conversion module and the characteristic of the whole circuit of the transmitter are elaborated in this paper.
论文详细介绍了介电测量技术的原理及影响因素，并用集总电路模型求解被测绝缘纸板的复介电常数。
The dissertation presents the principle of dielectrometry and its disturbance factors, and the methods to obtain the complex permittivity with a lumped circuit model.
论文详尽介绍了介电测量技术的原理及影响因素，并提出了利用集总电路模型求被测绝缘纸板的复介电常数的方法。
The thesis presents the measurement principle and its disturbance factors, as well as the method to obtain the complex permittivity of pressboard with a lumped circuit model.
本文依据传输线理论、微波网络理论、天线原理、矩量法和矩阵理论等，建立起基本传输线方程和四种等效电路模型，为使用集总电路迭代近似方法建立了基础。
In this paper, basic transmission line equation and four kinds of lumped-circuit model were constructed according to transmission line theory, microwave network, antenna theory and matrix theory.
在阻抗较高时，电路的建立时间变得更加重要，并常常成为决定总测量速度的主导因素。
At higher impedance levels, circuit settling times become more important and are usually the overriding factor in determining overall measurement speed.
彼此平行的电路总意味着一些通道得到的冷却剂较少。
Circuits that are in parallel with others almost always mean that some channels get little coolant.
本发明涉及一总用于安装在印刷电路板上的半导体器件(1)。
The invention relates to a semiconductor component (1) for mounting on a printed circuit board.
重点阐述了调光控制系统总设计框架、各个硬件模块电路和相应的软件流程。
The framework of whole dimmer control system, the realization of hardware circuit and software flow were expounded emphatically.
在单片机用户系统的设计中，必须对硬件和软件进行具体仿真。通过分析单片机系统的晶振电路、上电总清和负载能力来解决实际遇到的问题。
This paper introduces simulation methods of MCU hardware and software systems and help to solve actual problems by analyzing crystal circuit, electriferous reset and load capacity of the systems.
本文改进了集总参数元件阻抗变换器的特性，提出了新型集总元件功率分配器电路及其设计方法。
This paper improves the characteristics of lumped element impedance transformers and proposes new type power divider circuit and its design method.
介绍了半导体器件与电路的总剂量辐射效应及其测试技术。
The measurements of total dose effects of electronic devices and circuits are presented in this paper.
采用这种结构还可以减小电路的电容比和总的电容值，从而减小制造芯片时的面积。
It is shown from the theory and design that the structure can also be used in SC notch networks to decrease the capacitor ratio and capacitor area of the circuit.
传感器节点硬件电路功耗在无线传感器网络总功耗中占很大的一部分，其设计是否合理对整个节点的生命周期有很大的影响。
The power consumption of the sensor node's hardware circuit occupies a great part in that of the wireless sensor networks and rationality of its design has a great impact on the life of sensor nodes.
喇叭单元的共鸣决定于电路中的总电阻。
The resonance of a loudspeaker unit depends on the total resistance in the circuit.
输入业务强度是包括重试、提供给电信系统、或一组服务器，或一条电路上的网络的负荷量在内的总的通讯负荷。
Offered load is the total traffic load, including load that results from retries, submitted to a telecommunications system, group of servers, or the network over a circuit.
实际上，这就是把负电阻接入电路，使电路的总电阻为零。
In effect, a negative resistance is inserted in the circuit so that its total resistance is zero.
接着把有理多项式的参数转化成RLC集总元件参数，得到天线的等效电路模型；
Thirdly, deduce the parameters of the rational approximation to RLC lumped-element, then obtain the equivalent circuit model.
为了探讨弯曲差动传输线的差动弯角特性，我们采用一个集总等效电路来表示差动弯角。
In order to investigate the differential bend of the bended differential transmission line, a lumped equivalent circuit is adopted.
实测证明设计的电路提高了总功率测量精度，并且结构简单，成本低廉。
Measured circuit design that improved overall power measurement accuracy, and simple structure, low cost.
模拟结果表明，设计的两种新多米诺电路在同样的噪声容限下有效地降低了动态功耗，减小了总的漏电流，同时提高了工作速度。
The simulation results show that the proposed circuits effectively lower the active power, reduce the total leakage current, and enhance speed under similar noise immunity conditions.
对于确定的测试向量集，用该方法构造的扫描链能使电路总的测试时间最少。
For a fixed set of test vectors, the overall test time can be minimized using the scan chain constructed with this method.
设计过程首先从等效集总元件电路模型设计入手，然后使用平面结构实现各集总元件以便易于集成。
The design is done first in a equivalent lumped circuit model and then all lumped elements are implemented by planer circuit, which is required by integrated circuit.
采用两路结构相同的最大电流选择电路实现输入级总跨导的恒定。
The constant gm of input stage is achieved by two identical maximum current selection circuits.
对于确定的测试向量集，用该方法构造的扫描链能使电路总的测试时间最少。
For a fixed set of test vectors, the overall test time can be minimized using the scan chain constructed by this method.
内容包括时基电路、预置延时电路、输入接口、总清及加电复位等。
It includes the time-base circuit, time set and delay circuit, input interface, clear and reset circuit etc.
内容包括时基电路、预置延时电路、输入接口、总清及加电复位等。
It includes the time-base circuit, time set and delay circuit, input interface, clear and reset circuit etc.
应用推荐