• 气体混合流动系统重要应用之一

    Gas mixing is one of the most important applications in micro flow systems.

    youdao

  • 研究了克不是特别大微流动稳定性,这种流动处于N-S方程适用的临界处。

    Modified N-S equations have been used to study the stability of microflow with a not-too-large Knudsen number.

    youdao

  • 模拟显示聚体,可以随着液体流动通过表面自动聚集损伤部位

    The simulations show that microcapsules, travelling across a surface within the flow of a liquid, should naturally cluster around points of damage.

    youdao

  • 根据物理上直观的拉格朗日法,分析了交变流动发动机回热内代表性气体热力过程循环

    The thermodynamic processes and cycles of some characteristic gas parcels in the regenerator in a cyclic flow engine are analyzed thoroughly in Lagrangian's view.

    youdao

  • 实验研究螺旋管内两相流动传热性能光滑螺旋进行了比较。

    The two-phase flow heat transfer capability is tested and compared with the smooth helical tube.

    youdao

  • 从传热学物理状态变化弹形变方面阐述通道热压成形过程塑料流动机理

    Then plastic flow mechanics are depicted in three aspects as follows: heat transfer, physical state changing and viscoelastic formation.

    youdao

  • 然而由于纤维素颗粒形状不规则使得其粉末的流动不佳,造成重量差异

    Because the particle shape of MCC is irregular, it causes bad flowability, the variation of tablets weight, and the poor disintegration properties.

    youdao

  • 然后一定角度放置板,允许红细胞流动

    The plates were then placed at an Angle, and the red cells allowed to flow.

    youdao

  • 面向主动流动控制研发了气泡型动器及其阵列技术MEMS合成射流器技术。

    Based on MEMS technology, micro balloon actuator arrays and synthetic jets were developed for active control of flow over an airfoil.

    youdao

  • 目的研究流动复合树脂充填楔状缺损离体牙模型边缘渗漏情况。

    Objective To evaluate the variation in vitro microleakage of wedge-shaped class V restorations filled with flowable composites and compomer and GIC.

    youdao

  • 粉末注射成型由于市场前景广阔迅速成为当今的研究热点由于流动机理尚不明朗导致产品质量不稳定

    Micro powder injection molding is becoming hot spot rapidly because of its broad marketplace prospect, but as the flow mechanism is not still clear, it leads to the instability of product quality.

    youdao

  • 聚合物流体收缩流动行为注射成型工艺过程影响分子取向结构的重要因素。

    Contraction flow behavior contributes significantly to the orientation and structure of molecular in micro injection molding.

    youdao

  • PEA含量低于10%混物可纺性好,复合纤维流动方向形成明显取向

    When the content of PEA is less than 10%, the blends are well-spinnable, and the composite fibers have a well-developed highly oriented fibrillar structure along the fiber axis.

    youdao

  • 计算结果表明正交函数适用三角形槽内滑移流动特性分析计算;

    The results show that the orthonormal function method is available to study the slip flow characteristics in the triangular microchannel.

    youdao

  • 利用血细胞分析仪进行血液成分测定,采用荧光偏振测定细胞膜流动黏度

    Blood ingredients were determined by the blood cell analyzer, and erythrocyte membrane fluidity and microviscosity were measured by fluorescence polarization techniques.

    youdao

  • 利用血细胞分析仪进行血液成分测定,采用荧光偏振测定细胞膜流动黏度

    Blood ingredients were determined by a blood cell analyzer, and erythrocyte membrane fluidity and microviscosity were measured by fluorescence polarization technique.

    youdao

  • 探讨甲状腺结节钙化流动力学指标作为中医内结辨证客观指标可行性

    To investigate the feasibility of using microcalcification and hemodynamics in thyroid nodule as the objective index of gallae with phlegm and blood stasis.

    youdao

  • 本文主要针对流体通道内的单相两相流动传热进行系统实验研究。

    In this study, systematic experimental investigation was carried out on single-phase fluid flow and vapor-liquid two-phase flow heat transfer in silicon microchannels.

    youdao

  • 针对典型形状通道(缝隙)滑移边界条件下利用粘性流体运动方程动量方程,推导出速度流动阻力

    Aimed at typical shape micro-channel (fissure) under slip confine condition, it used dauby fluid motion equation and momentum equation, derived pace bout and running resistance.

    youdao

  • 对于水平井井筒稳定单相流动提出了水平井井筒管的“段”观点,从而简单实用地解决了井筒内质量流问题;

    A "theory of micro element" and equivalent seepage flow was raised to solve the various mass flow of single phase in the horizontal wellbore.

    youdao

  • 白色接近自由流动粉末具有气味或接近无味。

    White or slightly yellowish, free-flowing powder with a faint characteristic Odour and practically no taste.

    youdao

  • 分析尺度下熔体壁面滑移机理研究注塑成形壁面滑移对熔体充模流动行为影响

    Based on the analyses of wall slip mechanism of polymer melt flowing, the effects of wall slip on melt filling flow behavior in micro injection molding were investigated.

    youdao

  • 尺度道中单相流动研究通过对其流动阻力和换热强度等的实验进行的。

    Experiments to investigate the heat transfer and fluid dynamic characteristics of water flowing through micro channels were conducted.

    youdao

  • 沉积相和流动单元空间分布对比说明前者后者,且有利于发现剩余油

    Contrasting the spatial distribution of reservoir flow units and sedimentary microfacies shows that the former is finer than the latter and is very advantaged to find residual oil.

    youdao

  • 尽管CAS一种治疗方法,仍然许多潜在并发症流动力学异常、过度灌注综合征梗死再狭窄等。

    Although CAS is a microinvasive technique, it has some potential complications, such as hemodynamic abnormalities, hyperperfusion syndrome, cerebral infarction, and restenosis.

    youdao

  • 结果表明,制得球外观呈淡黄色粉末流动性好

    The results showed that the microspheres are yellow, flowable, stable.

    youdao

  • 本文引用考虑尺度效应雷诺方程,推导出了考虑尺度效应螺旋槽干密封内部流动近似算法

    Based on the Reynold's equations with the micro scale effects considered, a new kind of approximate algorithm for the inner flow of the spiral grooved gas seals was set up in this paper.

    youdao

  • 实验证实动脉瘤弹簧圈栓塞前后其血流动力学参数差异统计学意义P<0.01)。

    The experiments revealed that there was significant difference in hemodynamics parameter before and after embolization (P<0.01).

    youdao

  • 实验证实动脉瘤弹簧圈栓塞前后其血流动力学参数差异统计学意义P<0.01)。

    The experiments revealed that there was significant difference in hemodynamics parameter before and after embolization (P<0.01).

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定