本文主要介绍彩色负片冲洗机的微机控制系统硬件结构、软件设计特点及一些抗干扰措施。
This article is about the microcomputer control system of colour film processor, It mainly introduces the hardware structure, software design features and some anti-disturbance methods of the system.
文章介绍了综合量仪的机械结构、微机控制系统硬件和软件设计，并对测量误差来源进行了分析。
Here the design of mechanical structure of the tester and hard- and soft-ware of the PCcontrol system. An analysis is made on the sources oftesting error.
介绍了一种微机双绕组变压器负荷经济运行控制系统的基本工作原理、硬件结构框图和主要技术特点。
The basic working principle, hardware structure and main technical features of a micro computer based control system for transformer economic operation is presented in this paper.
本文介绍铁道车辆轴承标牌打字机的微机控制系统的硬件结构和软件特点。
This paper introduces the hardware and the software of microcomputer control system for sign typewriter on the railway vehicle bearing.
该方法无须对原机器硬件作任何改动，可用于微机实时控制系统中，方便地获得任意采样频率。
No hardware alteration is needed in this method. The time-interrupt achieved can be used in real-time microcomputer control systems and various sample frequencies can thus be conveniently obtained.
详细介绍了这个微机控制系统的硬件电路及软件设计。
The article has detailed the hardware and software design of this microcomputer control system.
本文介绍了卷扬式冲击钻机微机自动控制系统的基本原理、硬件的组成和软件的设计。
The fundamental principle hardware configuration and software design of a microcomputerbased automatic control system for winch type impact drill rig is described.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
介绍了多媒体技术在热处理炉微机控制系统中的应用以及热处理炉多媒体硬件的组成和软件系统。
An introduction of applying multi-media technique to heat treating furnace computer control system is expounded. The composition of multi-media system hardware and software are recommended.
本文介绍了精磨微机控制系统的工作原理、硬件和软件设计及加工精度分析。
It is presented in the paper about the work principle of microcomputer control system of cyclidrical grinder and the design of hardware and software and the analyse of processing precision.
介绍了基于微机并口的某设备控制系统，并根据系统要求，详细讨论了系统的硬件和软件设计方案。
Introduces a device control system design based on micro -computer parallel port, gives the concrete design method of system hardware and software according to system requirement.
本文介绍了一个用于以重油为燃料的高温隧道窑微机自动控制系统的控制原理和软、硬件结构。
The paper presents the implementation of hardware and software of micro—based control system for Hi—temperature tunnel kiln, which takes weight—oil as the fuel.
本文特介绍为解决这些问题而研制的微机控制系统的功能、硬件、软件等内容。
The paper introduces the functions, hardware, software, etc. of the computer control system that is designed to solve this…
简述了新型车载微机控制系统的结构，阐述了其硬件组成、主要控制功能、通信及显示系统功能。
This paper briefly states the structure of the new on board microcomputer control system, including its hardware components, main control function, communication and display system function.
并在原有微机控制系统的硬件基础上，构成智能化车载诊断系统。
And on the basis of the original microcomputer control system, the intelligent vehicle diagnosis system has been formed.
文章简要说明系统设计思想、微机控制系统的硬件结构及各子系统软件功能。
It also shortly explains the consideration of the system design, structure of the hardware in the control system of the microcomputer and function of the software in every sub - system.
研制开发了高真空排气过程微机实时控制系统，并对该系统的硬件构成和软件开发作了介绍。
Constant POwer control rule is also presented. The hardware and software in the microcomputer real-time high-vacuum exhausting system is introduced.
本文介绍了普钙湿法生产微机控制系统的硬件和软件设计，该系统已在生产实践中收到了明显的经济效益。
The microcomputer control system for wet process of superphosphate has gained distinct economic benefit. This paper deals with the hardware and software design of the system.
本文介绍了FL - I型热压机微机控制系统的设计思想、硬件设计、软件设计。该系统适用于需要压力与行程联合控制的热压系统。
This paper deals with the methodology, hardware and software design of FLI hot press microcomputer control system, which controls the pressure and displacement of platen.
本文介绍了电弧炉在刚玉冶炼中采用的微机控制系统以及硬件和软件，并对运行的效果进行了总结。
The paper describes the microcomputer control system and its hardware and software used in fused alumina smelting electric arc furnace. It summarizes the application effect of the control system.
阐述了盘式刹车钻压优化自动送钻微机控制系统的设计思想和研制方法，给出了系统的软硬件设计方法。
Design idea and development method of a microcomputer control system for optimization WOB (weight on bit) automation bit feed of oil rig disc brake is discussed.
介绍了一种新型的微机纠偏控制系统，介绍了系统功能、硬件构成和软件构成。
This paper describes a new type of strip deviation rectification system controled by single chip microcomputer. The system function, hardware and software structure are presented.
该系统利用微机控制，通过硬件控制系统设计和软件设计，实现了曲轴疲劳极限测试、数据处理等全过程的自动控制。
This testing system use microcomputer-control, by designing the hardware and software, to carry out the testing of fatigue-limit of crankshaft, and data process controled automatically.
并在原有微机控制系统的硬件基础上，构成智能化车载诊断系统。
And on the basis of the original microcomputer control system, the intelligent vehicle diagnosis system has been form...
本文介绍一个饲料厂微机控制系统的软、硬件设计思想与实现方法。
This paper introduces the design idea and implementation method of a microcomputer-controlled system's software and hardware in a feed processing plant.
本文介绍一个饲料厂微机控制系统的软、硬件设计思想与实现方法。
This paper introduces the design idea and implementation method of a microcomputer-controlled system's software and hardware in a feed processing plant.
应用推荐