基于嵌入式微控制器设计了一种血液冷藏箱的温度采集、控制系统。
This paper designs a temperature controlling and collecting system used for blood refrigerators, which is based on the embedded microcontroller.
现代微控制器设计提供了一些方法来降低微控制器上固定负载的功率要求。
Modern microcontrollers design provides a number of methods to reduce microcontroller power requirements depending on the microcontroller load.
分析发现，在传统八位微控制器设计中，基于累加器的ALU结构及CISC指令体系及系统构架是影响其整体性能的主要原因。
It has been found that the major limitations of typical 8-bit MCU are the ALU structure based on accumulator and the CISC architecture adopted in MCS-51 design.
一些设计可能使用外部微控制器从外部存储设备加载比特流。
Some designs might use an external microcontroller to load the bitstream from an external storage device.
为了达到上述目标，你需要设计和实施一个微控制器或类似的解决方案。
For such a purpose, you'd need to design and implement a micro-controller or similar solution.
虽然软件实现CAN协议是基于AT 90s8515的，但其软件设计思想也可供其它微控制器参考。
Though realizing can protocol by software is based on AT90S8515, software design idea can be referred by other microcontrollers.
简单介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Introduces intelligent lighting network system, and sets forth the design of intelligent lighting controller based on ARM microcontroller LPC2104 in detail.
本文详细介绍了基于微控制器的水中油含量检测仪的设计与实现。
In this article, the detailed introduction is shown about design and implementation of oil concentration detector based on microcontroller.
通过利用现场可编程门阵列fpga设计微控制器的接口电路，使得电路的设计变得简单灵活。
The design of interface circuits of micro controller becomes simple and flexible due to using FPGA.
另外，精心设计了微控制器的核心部件算术逻辑单元。
Additionally, we exactly designed the central process department: Arithmetic Logic Unit.
研究了C8051微控制器IP软核的参数化设计。
The parameterized design about the C8051 micro controller IP soft core is studied.
利用ARM S3C 2440微控制器、网络通信技术和嵌入式技术设计烟花燃放控制电路。
The design of a fireworks display control circuit is based on the ARM S3C2440 controller, the CAN bus communication technology and Embedded technology.
介绍了基于微控制器的芯片式机载语音告警器的设计和实现。
The design and realization of chip type aircraft-borne sound-warning device are introduced.
本文介绍了一种基于C8051F 120微控制器的嵌入式心电信号采集系统的设计与实现，该系统是12导联心电信号准同步采集系统。
The thesis introduces the design and implementation of ECG acquisition system based on micro-controller of C8051F120. It is a 12-lead ECG quasi-synchronous acquisition system.
本文简述了该系统的工作原理、组成结构和设计方法，并对传感器及微控制器的选用等内容进行了论述。
The working principle, hardware structure of the instrument and the design method are presented, the selection of sensor and MCU is discussed in detail.
本文中论述了CAN总线的基本原理与技术规范；设计了以微控制器AT89S52为核心的CAN总线智能节点；
This dissertation elaborated the basic principle and the technology standard of CAN bus, and designed a CAN node with AT89S52 micro-controller.
本研究利用微控制器作为控制单元，结合LED光源和传感器设计研制了一种便携式叶面积仪。
In this research, the portable leaf area meter is designed by combining microcontroller with light source LED and light sensor.
介绍以光纤传输的能量供电的微控制器系统的软硬件设计。
The hardware and software designing of a microcontroller system supplied by energy transmitted through optical fiber is described.
依据《煤矿安全规程》并结合井下监测监控的实际需求，本文设计实现了一种基于AT91SAM 7x256微控制器的煤矿智能分站控制系统。
According to the coal mine safety regulations and the practical requirement of mine surveillance, a control system of the mine intelligent substation based on AT91SAM7X256 is designed.
介绍一种以ARM微控制器LPC2210和网络控制器RTL8019AS为核心的直流电机嵌入式以太网控制器设计方案。
This paper describes a kind of DC Motor Ethernet control system which is composed of ARM microcontroller LPC2210 and Ethernet microcontroller RTL8019AS.
介绍了网络化的灯光控制系统，具体阐述了以ARM微控制器LPC 2104为核心的智能灯光控制器的设计。
Intelligent lighting network system was introduced, with emphasis on the design of intelligent lighting controller based on ARM microcontroller LPC2104.
熟悉家电软件设计和微控制器系统。
Be familiar with home appliance software design and microcomputer system.
在论文的写作过程中，首先对直流电机、微控制器和传感器等进行了深入的研究，在理论基础上，设计了系统的控制电路。
In the process of writing this thesis, first, based on the theory of the DC motor, controller and sensors, the control circuit has been designed.
本课程介绍了基于嵌入微控制器技术的电机系统的设计和编程。
This course is an introduction to the design and programming of electromechanical systems based on imbedded microcontroller technology.
众多家电控制正在发生变化，从纯粹的机械，以全面电子化微控制器被纳入设计。
Home appliance controls are changing from purely mechanical to fully electronic as microcontrollers are incorporated into the designs.
针对野外作业机器人面临的能源动力问题，设计了基于32位微控制器的燃料电池驱动机器人系统。
According to the power demand for the robot outdoors, the fuel cell powered robot based on 32 bit microcontroller is designed.
然后介绍了基于三星公司S3C 4510 B微控制器的最小系统硬件平台的设计工作。
Secondly it introduces the design of the hardware platform of the reduced system, which is based on the S3C4510B microprocessor.
本论文基于微控制器系统的软硬件设计与调试，以及系统集成调试成功的基础上，完成了车载mp3的系统设计。
In this paper, the system design of MP3 carried in the car is accomplished, based on the design and debugging of software and hardware, as well as the correct system integrated debugging.
本论文基于微控制器系统的软硬件设计与调试，以及系统集成调试成功的基础上，完成了车载mp3的系统设计。
In this paper, the system design of MP3 carried in the car is accomplished, based on the design and debugging of software and hardware, as well as the correct system integrated debugging.
应用推荐