单列角接触球轴承可承受径向，轴向或复合负荷，不过，任何轴向负载必须在一个方向。
Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
为满足不同的应用需求，薄壁轴承包括径向、断裂外滚道、角接触以及满装等多种配置和特性。
To meet the requirements of different applications, thin wall bearings including radial, outer raceway faults, angular contact and full equipment, and other configurations and features.
大多数轴承都支承径向或轴向负荷的转轴。
Most bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
这些轴承可以在径向移动。
径向力：与轴承的轴线所垂直的载荷；它和轴向力是影响轴承设计和应用的两个力。
RADIAL FORCE : The load on a bearing perpendicular to the axle, this and the Thrust load are forces that affect the design and application of bearings.
圆锥滚子轴承适用于径向和推力，但也接受联合载荷和倾斜力矩。
Taper roller bearings are suitable for both radial and thrust forces but also accept combined loads and tilting moments.
若用带轮、链轮等驱动时应设托架支承，以防主动齿轮轴承受径向力。
If the pulley, sprocket-driven, such as supporting brackets should be established to prevent the initiative gear bearing the radial force.
由于对旋轴流式风机电动机轴承要承受较大的轴向负荷和径向负荷，实际使用过程中常发生电动机轴承损坏的现象。
Due to the strong axial and radial load to the bearing of electromotor in counter-rotating axial fan, it is always occurred that the bearing was damaged in use.
径向负荷的重量是多少轴垂直放在上面。三轮车坐在一个地方对轴承的轴向负荷。下图是一个径向轴承截面的看法。
Radial loading is the amount of weight placed vertically above the axle. Sitting on a trike places an axial load on the bearings. The drawing below is a cross-sectional view of a radial bearing.
机床用圆锥滚子轴承可同时承受径向和轴向载荷，双列圆锥滚子轴承可承受双向轴向载荷。
Tapered roller bearings for machine tools can be both radial and axial loads, double row tapered roller bearings can withstand two-way axial load.
径向轴径轴承的种类为多楔径向轴径轴承。
调心滚子轴承可以承受径向负荷及二个方向的轴向负荷。
Adjusting roller bearings can bear the load and two radial direction of the axial load.
除轴向负荷外，此类轴承还能承受一定的径向负荷（见“当量轴承动负荷”）。
These bearings can accommodate a certain proportion of radial load in addition to the axial load (see under "Equivalent dynamic bearing load").
通过实例介绍了滑动轴承径向间隙理论值和实际值的确定。
To determine the theoretical value and practical value of radial clearance of sliding bearing was introduced with practical example.
从理论上分析了滚动轴承径向游隙的重要影响因素。
The important factors influencing the radial clearance of anti friction bearings are analysed theoretically.
如实际负荷为径向和轴向复合负荷，则必须计算当量轴承静负荷。
If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated.
当测量直径公差时，记得的径向轴承在研磨后可能产生微小变形。
When determining the diameter tolerances, remember that thin-walled rings of radial bearings may become slightly deformed after grinding.
单列角接触球轴承能够提供径向和推力载荷。
Single row angular contact ball bearings can accommodate radial and thrust loads.
角接触球轴承公差见径向轴承，第56页。
For the tolerance of angular contact ball bearings see radial bearings, page 56.
为使精对苯二甲酸装置达到设计能力，对离心机径向轴承材质进行了改进，满足了工艺要求。
The materials of radial sliding bearing of centrifuge areimproved to make the treat capacity attain the design goal fortereththalic acid unit. And then the process requirements are satisfied.
本文给出有限长径向轴承雷诺方程的一种近似解。
This article brings forward an approximate analytical solution to Reynolds equation for finite journal bearings.
泵的轴向力与径向力分别由轴承盒内的滚动轴承来承受。
Pump axial force and radial force by the rolling bearing box to bear.
详细地介绍了空气静压径向轴承试验台的设计过程。
This paper introduces a design process of a testing stand for aerostatic journal bearings.
研究了非线性径向轴承支承的转子系统的动力行为。
Dynamic behaviors of a rotor system with nonlinear journal bearing supports were analyzed.
本文利用小扰动法分析了轴向缝切向进气径向气体轴承的稳定性问题。
This paper describes an analysis of whirl instability of externally pressurized gas bearing with axial slots of tangential supply.
以太钢1549热连轧的故障为例，探讨了工作辊锁紧缸异常对工作辊径向轴承的影响，为同行提供经验。
Based on the faults 1549 hot stip rolling for example, the influence of working roller locking cylinder on roll bearing was discussed at TISCO, also supply experience for fellow trader.
结果表明：圆柱滚子轴承的径向游隙直接影响着滚动轴承-双转子系统的稳定性。
The results show that the system stability is directly influenced by the radial clearance of cylindrical roller bearing.
下图是一个径向轴承截面的看法。
The drawing below is a cross-sectional view of a radial bearing.
通用设计的角接触球轴承的公差可参考第56页上的径向轴承。
For tolerances of angular contact ball bearings of universal design, see radial bearings on page 56.
推力球轴承是专为支持轴向力设计的，他们用于轴向力过高，可以由径向轴承传播(的地方)。
Thrust ball bearings are designed for supporting axial forces; they are employed where axial forces are too high to be transmitted by radial bearings.
应用推荐