乳化剂的浓度和反应温度是影响产品性能的主要因素。
The concentration of emulsifier and the reaction temperature is the main factor to effect the performance of product.
乳化剂的浓度和反应温度是影响产品性能的主要因素。
The concentration of emulsifier and the reaction temperature is the main f...
结果表明，添加剂中胶体粒子的结构是影响产品性能的重要因素。
The research results showed that the micelle structure of the additive had important influence on the performance of product.
油相流量控制不好，会导致外部的油膜过厚或过薄，影响产品性能。
Bad control of oil phase flow will cause too thick or thin of external oil film, which will affect the product performance.
天然矿物填料的白度是影响产品性能、价格和经济效益的最主要因素之一。
Whiteness is one of the most important properties of the natural inorganic fillers.
介绍了利用棉麻下脚料生产纤维素醚的工艺条件和影响产品性能的主要因素。
The article describes the technological prerequisites for the production of cellulose ether with the leftovers of cotton and hemp and the main factors affecting the properties of the product.
本文简介了其反应原理、合成工艺、测试结果以及影响产品性能的主要因素。
The reaction principle, the synthesis craft, the test results and the major factors of influencing the product performance are introduced briefly.
对这种产品，主结构系统的静动态品质是影响产品性能的关键因素，这就要求建立准确的有限元模型。
Dynamic and static characteristic of the main system is the key factor of production. So it required to establish accurate element model.
对影响产品性能的几个重要因素，包括胶凝材料用量、成型压力、物料含水率和养护制度等进行了研究探讨。
The important factors influencing the product performance are investigated, including the dosage of cementing agent, forming pressure, material moisture and curing regime.
不过她说，标签错误不会影响产品性能或患者安全，因为仪器表面显示的电压设置和内部的实际电压对患者而言都是安全的。
She added, however, that the mislabeling 'did not affect product performance or patient safety, ' because both the voltage settings indicated on the box and those on the devices are safe for patients.
前言：氮对石油产品性能的影响是复杂的。
Nitrides have intricate impacts on the performance of the petroleum.
氮对石油产品性能的影响是复杂的。
Nitrides have intricate impacts on the performance of the petroleum.
讨论了反应原理、工艺条件的控制、影响因素及产品性能。
The reaction principles, the process conditions, effect elements and products performance are discussed.
本文讨论了摇摆滚塑成型中粉料粒径大小、工艺条件等对产品性能、内部结构、氧化物的存在及诸因素的影响。
The influences of powder particle diameter and processing conditions upon the factors like product property, inner structure and existence of oxide in rotational molding processing were discussed.
通过实验对比，重点分析了生产速度、热风温度、热风风压等工艺参数对产品性能的影响。
Through experiment contrast, this paper discusses the process parameters, especially production speed, hot air temperature and pressure that affect the product properties.
介绍了适用于油田油井堵水用的改性脲醛树脂的生产原理和工艺，以及生产中的关键因素对产品性能的影响。
Production theory and processes of modified urea-formaldehyde resin used in oil well water shutoff and some influence on product performance resulted by main factor in the production are introduced.
手持导航产品中，电磁干扰对产品性能的影响巨大。
In handheld navigation products, electromagnetic interference increasing affects its performance.
并通过实验挤压，初步分析了挤压诸加工参数，及其对挤出产品性能的影响。
It also analyzed the effect of different parameters of extrusion process on product property.
最后讨论了测量副反应对反应时间及其最终产品性能的影响。
In the end, it discussed the effects of side reactions on the properties of the product and reaction time.
研究了氨基磺酸盐asr高效减水剂的合成工艺，分别考察了第四单体、搅拌速度、加料顺序、温度、时间及配比等对产品性能的影响。
Synthesis of ASR amino-superplasticizer was studied. The fourth monomer, agitation speed, order of feed, temperature, time, composition of feed were key factors affecting product performance.
研究了喷胶棉粘合剂中单体、交联剂、乳化剂、引发剂及聚合反应温度对产品性能的影响。
The effect of monomer, crosslinking agent, emal - sifier, initiator and polymeric reactiontemperature of adhesive for non - woven fabric on product' s properties are discussed in this paper.
研究了PTFE废料粒径、各种填料用量及预成型压力对产品性能的影响。
The influence of granule size of waste PTFE, mass ratio of fillers and the preforming pressure to the performance of the product is studied.
介绍了用于烧结机械零件、电焊条和其它领域的水雾化纯铁粉的生产工艺，产品性能及其性能变化的影响因素。
Production process, properties and factors affecting their performance of water atomized iron powder used for sintered machine parts, welding electrodes and other fields were introduced.
阐述45优质窄带钢的开发，结合CCT曲线介绍轧制变形量、冷却强度对产品性能的影响。
It is introduced the development of 45a narrow strip and introduced the influence on the production performance by the deformation and the strength of cooling by CCT curve.
考察了醇酸树脂油度、醇酸树脂和石油树脂的配比、溶剂的类型、制备工艺等对产品性能的影响。
The influence of the oil length of alkyd resin, the mass ratio of alkyd resin to petroleum resin, the types of solvents, prepare process and et al to the performances of the product is investigated.
本论文主要研究了改性玉米淀粉胶粘剂的主要成分配比及工艺条件对产品性能的影响。
The effects of adhesive formulation and process conditions upon the performance of modified corn starch adhesive were explored in this study.
介绍了该涂料的制备工艺，并讨论了原材料和生产条件对产品性能的影响。
The influence of raw materials and production conditions on product performance is discussed as well.
研究了基材、EVA中熔融指数和醋酸乙烯含最、剥离力稳定剂的选择及用量对保护膜产品性能的影响。
The influences of substrates, melt index (MI) and VAC content in EVA, selection and add-on of peeling force stabilizers on the properties of projective film products are studied.
研究了基材、EVA中熔融指数和醋酸乙烯含最、剥离力稳定剂的选择及用量对保护膜产品性能的影响。
The influences of substrates, melt index (MI) and VAC content in EVA, selection and add-on of peeling force stabilizers on the properties of projective film products are studied.
应用推荐