本文研究了白云石煅烧性能及煅烧后粉化率与矿物相形貌与结构的关系。
In present study, the mineral phase and the structure of the dolomite was investigated focus on its calcining performance and pulverization after calcining.
本文研究了白云石煅烧性能及煅烧后粉化率与矿物相形貌与结构的关系。
Sinter storage times and dropping times relating with powder ratio were tested, mineralogical phase of sinter was also detected.
利用SEM、FTIR、EDS、表面接触角分析仪等研究硅烷膜的表面形貌与结构特征。
The characteristics of the silane films were investigated by SEM, FTIR, EDS and surface contact Angle analyzer.
结果表明，该膜层的成分、形貌及结构与常规氧化膜有很大的区别，是一种新型铝氧化膜。
The results show that the film, greatly different from conventional oxide films in composition, morphology and structure, is a novel aluminum oxide film.
球墨铸铁经过气体多元共渗后可在其表面形成氮化层，通过X射线衍射和扫描电镜对渗层的相结构与形貌进行分析。
The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM.
利用电子探针、扫描电镜研究了聚丙烯腈在湿法纺丝工艺中的横截面形貌与皮芯结构。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
结果表明，产物的形貌极大地取决于表面活性剂的组装结构和它们与反应物间的配位作用。
The results suggest that the morphology of the product is largely dependent on the assembly structure of the surfactant and the coordination between the polyelectrolyte (surfactant) and the reactant.
使用TEM研究了钢中贝氏体的精细结构及碳化物的形貌与分布，加入微量元素使贝氏体铁素体组织明显细化。
The fine structure of bainite and the morphology and distribution of carbides in steels were investigated with TEM.
按照预测的情况。在讨论玻璃的性质与结构形貌的关系时，可得到满意的解释。
According to the prediction, satisfactory interpretation was obtained in the discussion on the relationship between properties and structural features of glass.
结果表明凝固浴温度会影响初生纤维的横截面形貌与芯部结构。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。
The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.
通过进行蠕变曲线测定和组织形貌观察，研究了FGH95粉末镍基合金的微观组织结构与蠕变行为。
By means of the measurement of creep curves and microstructure observation, an investigation has been made into the microstructure and creep behaviors of FGH95 powder nickel-base superalloy.
通过对铝合金、结构钢等金属接触腐蚀表面的EDS成分分析和SEM微观形貌分析，探讨金属材料与玄武岩微纤维隔热材料接触腐蚀的原因。
Based on EDS and SEM analysis of metal corrosion surface, the course of contact corrosion between aluminum alloy, structural steel and basaltic microfiber heat-resistant materials were proposed.
结果表明凝固浴温度会影响初生纤维的横截面形貌与芯部结构。
It is found that the temperatures of coagulation baths would greatly influence the cross section and skin-core texture of PAN fiber.
另外，碳纳米管的形貌与金属-纳米管之间相互作用对填充镍的结构并没有显著的影响。
In addition, the structure of nanotube and the interaction between the metallic nickel and the nanotube have no obvious inf...
本文还对裂纹扩展途径与断口形貌之间的关系进行了分析，对进一步研究低温用钢的疲劳特性和低温下工程结构的失效分析具有重要意义。
We also analyse the relationship between crack growth track and fractography. Thereforde, it is significant for studying the fatigue property of the steel used and its fatigue analy…
本文还对裂纹扩展途径与断口形貌之间的关系进行了分析，对进一步研究低温用钢的疲劳特性和低温下工程结构的失效分析具有重要意义。
We also analyse the relationship between crack growth track and fractography. Thereforde, it is significant for studying the fatigue property of the steel used and its fatigue analy…
应用推荐