最后根据车牌形状约束条件定位车牌区域。
Finally, several shape constraint conditions were employed to locate true license plate regions.
引入了三种变形约束规则：位置约束、形状约束和重复性约束。
The paper puts forward three deformation restriction rules: position restriction, shape restriction and repeating restriction.
目的提出基于椭圆形状约束的改进图切割算法，用于分割颈部淋巴结超声图像。
Objective To evaluate the diagnostic value of high-frequency ultrasound in cervical lymph node masses.
针对三维数据点重构自由曲面的光顺问题，探讨了一种基于形状约束的曲面重构技术。
On the base of the fairing of free-form surface reconstruction from 3d data points, this paper probes one method based on shape constraints.
针对2维的人脸(头)跟踪的特点，提出了一种结合直方图匹配和形状约束的鲁棒跟踪方法。
A robust 2-d head tracking is proposed which is based on histogram matching and shape constrain.
然后通过插值将结果向下一尺度低频图像传递，并利用尺度间形状约束和边界约束复合acm进一步细化曲线，使其符合局部图像特征，如此逐层重复直至原始图像。
Then the result is interpolated into the next finer level of approximation image as a initial contour, and evolved with edge based and inter scales shape constrained ACM.
几何约束(形状和体积)无疑影响到设备的设计决策，如手机；每一代新产品都在曾经较小的表格中塞入了更多的功能。
Geometric constraints (shape and volume) clearly affect design decisions for devices like cell phones; each new product generation has packed more function into ever smaller forms.
你可以在上面画任何图案、任何形状、任何图表，几乎没有任何约束。
You can draw any diagrams, shapes, charts, pictures - there is little restriction.
定位四元谓词形状、编辑读数、连接角色和添加约束。
Position quaternary predicate shape, edit reading, connect roles, and add constraints.
给出了过滤片的几何形状、行为描述、能量方程以及约束方程。
The geometric shape, deformation behavior description, energy equation and constraint equation of the filter is constructed.
然后根据似然差函数和区域的形状的约束建立融合代价，使得所有可以融合的区域按照一定的顺序融合。
Then we construct merging cost according to the likelihood difference function and region shape constrains, and make regions to be merged with order.
并给出了3D曲线形状边界约束的最优方程。
The optimal equation of 3d curve-shape with constrained boundary is given.
首先，将基于时间历程的质点动力学方程转化为基于高度剖面的质点动力学方程，同时利用动压代替速度，使轨迹形状直接和动压约束相关。
First, time replaced by altitude and dynamic pressure as the independent variable of nonlinear equations of motion, which make the trajectory shape correlative to dynamic pressure constrains.
定位四元谓词形状、编辑读数、连接角色和添加约束。
Position ternary predicate shape, edit reading, connect roles, and add constraints.
定位三元谓词形状、编辑读数、连接角色和添加约束。
Position binary predicate shape, edit reading, connect roles, and add constraints.
在分析了影响并联机器人工作空间的约束前提下，通过边界数值搜索的方法，得到了工作空间的形状及其大小。
Given multiple restrictions of workspace, the shape and volume of workspace are gained through method of boundary numerical search.
磁脉冲力的形式（峰值、脉宽）、分布与端部约束条件决定管件变形后的形状。
The post-deforming form of tube is determined by the amplitude, pulse width, distribution and end restrain condition of pulse force.
这种刚架桥可以组成某种形状的木梁、钢筋混凝土梁或更复杂的约束。
This rigid frame bridge can form a shaped wooden beams, reinforced concrete beams or more complicated constraints.
该形状可以是外壳及内部约束两者的函数。
The shape may be a function of both the housing and internal constraints.
研究表明，断面形状对混凝土柱约束性能起着决定性作用。
The research indicates that the section shape is one of the critical factors in the confinement performance.
提出一种修改NURBS曲面形状的新算法。该算法运用约束优化方法，通过改变控制顶点和权因子修改NURBS曲面的形状。
With the constrained optimization method, a new algorithm for shape modification of NURBS surfaces is presented by altering the location of control points and the weights of original surfaces.
混凝土矩形柱在FRP侧向强约束作用下，极限应力、极限应变的提高系数与FRP的包裹量及截面形状、特征有关。
For rectangular columns sufficiently confined with external FRP, the improvement of ultimate stress and stain is related to the amount of FRP and the shape and characteristics of the cross-section.
通过设计参数来修改特征形状和定位，并采用专家系统驱动满足给定约束条件的特征几何形状。
The dependent relationship of features is described by parent-child operator structure. The feature shape and location can be modified by design parameters.
这种融合利用了红外图像目标轮廓信息约束可见光图像中动态轮廓线的收敛形状，有效地提高了可见光图像目标跟踪的准确性。
In this fusion, the dynamic contour's convergent shape in visible image is restricted by the target's contour in IR image. This fusion improves dynamic contour's tracking accuracy effectively.
应用非线性规划法对铁塔进行形状优化，给出了铁塔在多工况、多约束条件下形状优化的一种分层算法。
The tower shape is optimized by nonlinear programming method. An hierarchical algorithm for the tower shape optimum is given.
其次，在一般连续体拓扑优化的基础上，对孔洞的形状施加几何约束，开展了带规则几何约束的连续体频率拓扑优化研究。
Secondly, based on the common topology optimization of continuum, by restricting hole's shape, frequency topology optimization with regular geometrical constraints is studied.
将插值曲线约束于给定的区域之内是曲线形状控制中的重要问题。
Constraining the interpolating curves to be bounded in the given region is an important issue in curve design.
第二步是以车轮的质量为目标函数，以车轮的应力、径向及横向位移为约束函数，以车轮辐板形状为设计变量进行设计。
The second step is taking the mass of wheel as target function. The stress, radial and cross displacement of wheel as restrain function, the spoke profile of wheel as design variable.
通过设计参数来修改特征形状和定位，并采用专家系统驱动满足给定约束条件的特征几何形状。
The feature shape and location can be modified by design parameters. An expert system is used for deriving a geometry of the features which satisfies the given constraints.
能预测复合材料的宏观本构列式和弹性基体约束下的形状记忆合金的相变特性。
The constitutive relations of the composite and dynamic equations of the SMA transformation were predicted.
应用推荐