这个被称为空氮的缺陷作用就像是一个传感器，因为它的荧光强度会随着其与磁旋的相互作用而变化。
The defect, known as a nitrogen-vacancy defect, functions as a sensor because its fluorescence intensity is altered by interactions with magnetic spins.
该卡包含有传感器，可以测定不同设备或窗户的光线强度。
The card contains sensors that measure the intensity of light coming from different fixtures or Windows.
传感器检测到波长的变化，而其信号强度不影响传感信息，使其高度可靠，谭教授说道。
The sensors detect changes in wavelength, and their signal strength does not affect the sensing information, making it highly reliable, Tam said.
该系统由高强度系绳连接到移动系泊系统，PTDS配备了多任务传感器，能够满足各种监视的需求。
Attached by a high-strength tether to a mobile mooring system, PTDS is equipped with multi-mission sensors that can address a variety of surveillance needs.
当发射光照到相机的传感器上时，每个像素点抓取一个特定的波长，并对匹配波长的光线进行电子放大。 从仅有几个光子的微弱的原始信号，放大到可见的强度。
That amplifies the original dim signal, composed of just a few photons, until it becomes visible.
这些计算可能基于可见性(标签是否位于传感器的视线中)、信号强度或者信号从标签发送到传感器的时间量。
These calculations might be based on visibility (whether the tag is in the sensor's line of sight), the signal strength, or the amount of time it takes the signal to travel from the tag to the sensor.
针对磁通门传感器检测到的环境磁场强度信号，运用谐波选择法，设计了磁通门信号处理电路。
This paper adopts harmonic choice method to design fluxgate signal processing circuit in allusion to the environment magnetic field strength signal of fluxgate sensor detecting.
传感器可以安装无需关闭流，也没有阻挠或压力下降。流量积算显示和不断随着电池状态，信号强度。
Sensors can be mounted without shutting down flow and there is no obstruction or pressure drop. Flow rate and totalizer are displayed continuously along with battery status, signal strength.
本文介绍一种新颖的三节点式光纤强度调制传感器全光纤补偿网络的原理和建模。
This paper describes a novel all fiber compensation network for an intensity modulated optic fiber with three-access and its mathmatical model.
光学温度传感器在温度测量等领域已经得到了广泛应用，特别是采用荧光强度比（FIR）技术进行测温。
Optical temperature sensor, especially these based on the fluorescence intensity ratio (FIR) technology, has been widely used in the fields of temperature measurement.
本文介绍了一种新型强度补偿型二维光纤位移传感器。
This paper describes a two dimensional fiber optic displacement sensor with intensity compensation.
本文介绍了一种强度补偿型光纤位移传感器。
An optic fiber displacement sensor with intensity compensation is introduced in this paper.
强度法是干涉型传感器采用的最古老、最简单的方法，它采用单色激光光源作为系统的光源。
The intensity modulation method is the oldest and simplest method for fiber-optic sensor, in which a homochromatic laser is used as system light source.
荧光光纤温度传感器作为光纤传感器的一种，通常分为荧光强度型和荧光寿命型两大类。
Fluorescence fiber temperature sensor, as one kind of fiber optic sensors, can be divided into two types, which is sort of fluorescence intensity and sort of fluorescence-lifetime.
本文介绍了一种结构简单、易于实现的反射式强度调制型光纤传感器。
In this paper, a reflective intensity modulation optical fiber sensor with simple structure and easy design has been introduced.
这时传感器输出电信号，经整流放大，改变线圈上的电流，直至线圈回位，其电流强度与被称物体的重力成正比。
Then the sensor output signal, amplified by the rectifier to change the coil current until the coil back to bit, its current strength and the object's gravity is called proportional.
研究了反射式强度调制型光纤传感器中反射面的形状对光强调制特性的影响，推导得出了含反射面形状因子的光强调制函数。
In a reflective fiber optic displacement sensor, the influence on intensity modulation property caused by the reflector shape was studied theoretically with the mathematic model found.
该传感器可测量各种不同的高强度声压和高水准动态压力。
Dynamic pressure Sensors can measure a wide range of varying high intensity sound pressure and high level dynamic pressure events.
应用该模型计算了超磁致伸缩力传感器空气隙中的磁感应强度和磁致伸缩棒上施加力的关系，并与实验值进行了比较。
Using the proposed model, the relation between the magnetic flux density in the air of the giant magnetostrictive force sensor and the value of force applied on the magnetostrictive rod is calculated.
提出了一种基于图像处理的反射式强度调制型光电传感器光路调整方法。
A new method of optical axis alignment for RIM optical sensors based on image processing is presented.
强度调制型荧光光纤温度传感器具有其它光纤温度传感器所不具有的优点。
The optical liber intensity-modulated temperature sensor is better than other optical fiber temperature sensors in some aspect.
本文较详细地介绍了基于半导体吸收式光强度调制原理的光纤温度传感器的原理及其实现。
The principle and realization of a Fiber-optic temperature sensors ba sed on semiconductor optical absorption were discussed in detail.
简要介绍反射式强度型光纤传感器的工作原理及各组成部分的作用。
This paper introduced and discussed the operating principle of the reflection-type fiber sensor.
在光波导化学传感器研究中，辐照计检测的光强度由记录器(打印机)显示。
In the optical waveguide (OWG) chemical sensor detecting system, Radiometer display or printer is used to show the detected data.
传感器提供的红，绿，蓝，以及清除（RGBC）光感测和接近度检测，在各种照明条件下检测光强度。
The sensor delivers red, green, blue, and clear (RGBC) light sensing and proximity detection, detecting light intensity under a variety of lighting conditions.
轮力传感器研制的关键技术包括可靠且准确的信号和能量传输、信号的解耦、强度和结构安装要求等。
The key technology of the WFT consists of the reliable and accurate transfer of signal and power, the signal decoupling, the requirement of intension and space, etc.
传感器采用不锈钢材料，强度高，不泄漏，使其更适用于现场使用。
The sensor is made of stainless steel. It has great strength and is leakage-proof.
在强度调制型光纤传感器中，光源发光强度和光电接收器工作的稳定性，是决定测量精度的关键因素。
In intensity-modulated type optic fiber sensors, luminous intensity of a light source and operating stability of photoelectric receiver are the key factors for determining measuring accuracy.
由此，增加每个制动器的断裂强度，并因此获得具有优良抗冲击性的半导体加速度传感器。
Thereby, the breaking strength of each stopper is increased, and hence a semiconductor acceleration sensor having superior shock resistance can be obtained.
由此，增加每个制动器的断裂强度，并因此获得具有优良抗冲击性的半导体加速度传感器。
Thereby, the breaking strength of each stopper is increased, and hence a semiconductor acceleration sensor having superior shock resistance can be obtained.
应用推荐