本文运用热弹性力学原理,分析了温度变化对啮合齿轮侧隙的影响以及对齿厚偏差选择的影响。
Based on the thermal elastic mechanics, the influence of temperature change on the normal backlash was analyzed, and the deviation of teeth width was calculated.
摆盘发动机的约束机构主要有圆锥齿轮、直导槽、弹性直导槽和“8”字槽等几种形式。
Restriction of wobble-plate engine is given as bevel gear, straight groove, elastomeric straight groove or 8-shape groove mechanism.
所提出方法对于内外齿轮啮合、齿数差异较大齿轮啮合等弹性共轭曲面问题的求解,有着重要的理论和实际意义。
It has theoretical and applicable significance in solving the elastic conjugate problems of gear engagement, such as inner gear meshing, or gear transmission with large difference in gear Numbers.
本文在粘弹性材料三参数模型的基础上建立了塑料齿轮接触问题的计算方法。
A calculation method of contact problem of plastic gears based on three parameters model of viscoelasticity material is presented.
介绍了机床弹性滑键齿轮变速换挡机构的结构原理,并对弹性滑键齿轮变速换挡机构进行理论分析。
In the paper, a new type the elastic sliding key gearshift mechanism of machine tools was presented, and the gearshift mechanism structure principle is analyzed.
本文扼要地介绍了机车防振橡胶弹性牵引齿轮的结构。
The structures of elastic driving gears made of antivibration rubber for locomotive use are briefly introduced in this paper.
奥贝球铁材料的弹性模量比钢小,因而奥贝球铁齿轮工作时受到的表面接触应力比钢齿轮小。
The elasticity module of ADI is lower than that of steels, so that the surface contact stress borne by ADI gears during working process would be lower than steels.
为合理设计弹性滑键齿轮变速换档机构提供了理论依据。
Based on this theory, elastic sliding key gearshift mechanism of machine tools can be designed.
在应用边界元方法计算直齿圆柱齿轮的本体温度场的基础上,进一步研究了直齿轮在齿厚方向和沿其轴向由其本体温度的改变和传动载荷而引起的热弹性变形。
On the basis of this result further study is made on thermal elastic deformation resulted from bulk temperatures changing and transmission load of the spurs gear in the direction of tooth and axle.
该模型考虑了轴承,轴和齿轮啮合弹性。
This model considers the elasticity of bearings, shafts and gear meshes.
本文以边界元法作为应力分析工具,对三维弹性接触问题的形状优化问题进行了理论上的探讨,并对斜齿轮接触问题进行了实际分析。
This paper discusses the optimization problem of 3-D elastic contact objects in theory using BEM, and analyze the real contact problem of helical gears.
谐波齿轮传动是基于柔轮的弹性变形来传递运动或者动力的。
Being based on the flexible deformation, harmonic drive achieves transferring its motion or power.
结果表明,齿面弹性变形引起的齿轮轮齿的微小转动对啮合点的最终位置有一定的影响。
The results show that the micro rotational Angle induced by the tooth surface elastic deformation has definite effect on meshing points.
本文用三维光弹性法分析锥齿轮在扭矩和离心载荷下的应力分布。
The three-dimensional photoelasticity method is used to analyze the stress distribution in the bevel gear under torsional moment and centrifugal load.
从圆弧齿轮齿面微分几何分析、弹性接触变形和跑合磨损分析,建立了具有二维表面速度的点接触弹流基本模型。
Based on the fuzzy mathematics and the theory of the reliability design, the mathematics model of the fuzzy reliability design of the circular arc gears is established.
用光弹性应力分析,论证了美国卡特皮勒拖拉机公司的齿轮类线接触疲劳试样具有可靠的线接触模拟性;
Photoelastic stress analysis proves reliable line contact simulation of samples for gear style contact fatigue parts designed by Caterpillar Tractor Co. , USA.
确定圆弧形齿轮轮齿强度将涉及到很多因素。就是在弹性理论上来看也是一个复杂的课题。
Determination of the bending strength of gear teeth of circular-arc profile gear is very difficult due to many unknown factors, which would be also a complicated problem in the field of elasticity.
电动机与齿轮泵须用弹性联轴器连接,同轴度小于0.1毫米,倾斜角不得大于1度。
Motor and gear pump with elastic shaft coupling, coaxial degree is less than 0.1 mm, Angle shall not be greater than 1 degree.
我们将齿轮啮合过程中因多齿啮合而导致齿轮副承载能力提高的现象称为弹性啮合效应。
The phenomenon of increased loading capacity caused by several contact teeth is called Elastic Meshing Effect (EME).
他们采用电动马达或引擎,通过连接的齿轮,皮带,橡胶或弹性耦合,以减少振动。
They are powered by an electric motor or an engine, connected through gears, belts, or a flexible elastomeric coupling to reduce vibration.
光弹性试验结果表明锥齿轮在两种载荷分别作用下,齿根应力分布是不同的。
The results show that the stress distributions in roots of the bevel gear are different under respective loads.
为了对弹性联轴节的隔振作用有进一步的了解,在分轴齿轮箱试验台上进行了对比试验。
To understand the isolation effect of the elastic coupling, the contrast test was made in the special gearbox test device. The results indicate that the elastic coupling produces e…
为了对弹性联轴节的隔振作用有进一步的了解,在分轴齿轮箱试验台上进行了对比试验。
To understand the isolation effect of the elastic coupling, the contrast test was made in the special gearbox test device. The results indicate that the elastic coupling produces effects not...
根据光弹性试验和综合振动试验结果得出如下结论:1。锥齿轮齿槽裂纹并非由起动扭矩引起。
According the results and the comprehensive vibration test data, it can be concluded as follows: 1.
根据光弹性试验和综合振动试验结果得出如下结论:1。锥齿轮齿槽裂纹并非由起动扭矩引起。
According the results and the comprehensive vibration test data, it can be concluded as follows: 1.
应用推荐