采用逐点增量弯曲的方法对网格式带筋整体壁板进行了试验研究，并进行了有限元模拟。
In this paper, the incremental bend forming technology and finite element simulation are applied to form the panel.
能带弯曲是一种有效杀死病毒的方法，因为这种技术使得电子由紫外线中解脱出来，向前来游荡与水反应产生羟基自由基。
Band bending is an effective way to kill viruses because the technique allows electrons, which were freed by the UV, to travel forward and create hydroxyl radicals by reacting with water.
当天文学家用这种方法从地球上观测到一颗恒星在另一颗恒星前“走过”时，距地球较近的这颗恒星的重力就如同一个镜头，将较远的那颗恒星的光弯曲并放大。
In this method, when one star passes in front of another, as seen from Earth, the nearer star's gravity ACTS like a lens, bending and magnifying the more distant star's light.
这一方法指的是将目光集中在恒星上，当行星从恒星前经过时产生的引力将会使光线弯曲，这时就会得到关于详细情况的报告。
The idea would be to stare at a distant star and report instances when its light had been bent by the gravity of a planet passing in front of it.
避走弯曲的小路或是偏僻的乡村小路是降低风险的很简单的方法。
Avoiding curvy roads or isolated rural routes is one easy way to cut way down on the risk.
我们到了一个需要优雅地处理多处弯曲的步骤，但是，其核心方法不过是拷贝、移动和使用变形工具模仿曲线。
We have reached a delicate part which takes a lot of tweaking to get right, but the main idea is to use a copy of the volume, move it into place and then use the Warp Tool to simulate the curvature.
加热(如烹煮或加热杀菌)或者照射等杀菌处理是从受到污染的食品中祛除弯曲杆菌的唯一有效方法。
Bactericidal treatment, such as heating (e.g. cooking or pasteurization) or irradiation is the only effective method of eliminating Campylobacter from contaminated foods.
因此，研究者们使用各种方法，以期设计出能够随意弯曲的电子部件，电子纸就是其中的一种。
Researchers have devised ways to make flexible electronics, for such things as electronic paper.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
这种方法是适用于由刚性结构体系(强柱和梁)转变成框架、弯曲的元素。
This approach was applied by transformation of the rigid structural system (strong columns and beams) into framing, curved elements.
分析了钻杆接头对水平井段钻柱屈曲临界力和弯曲应力的影响，提出了计算钻柱正弦屈曲临界力的新方法。
The effects of the connectors on the critical buckling load and the bending stress of pipes in horizontal section are analyzed.
双参数方法是构造高阶问题有限元(例如薄板弯曲问题单元)的有效方法。
The double set parameter method is an effective way for constructing finite elements of higher order problems (such as plate bending problem finite elements).
采用显微观察、拉伸和弯曲等力学测试方法，研究了竹材的微观结构和力学特性的关系。
The microstructure of bamboo was investigated and correlated with the mechanical properties of this material under tensile and flexural stresses.
提出了机翼形叶片弯曲成型模的回弹计算方法。
Resilient calculating method of bending forming die for wing blade is put forward.
提出了一种新型气动弯曲关节手指，并应用坐标变换的方法建立了手指的运动学方程。
This paper presents a new type of finger based on pneumatic bending joint and establishes the kinematics equation of the finger by using coordinate system transform.
通过两种武汉市售蒙脱土和实验室纯化蒙脱土，采用压缩应变能、弯曲应变能的方法，进行蒙脱土改性沥青低温性能研究。
The methods of compressing strain energy and bending strain energy are adopted to study low temperature performance of montmorillonite modified asphalt with two different montmorillonites by indoo.
本文建立了无粘结预应力混凝土结构开裂后弯曲计算的计算机方法。
A computer method is presented in this paper for the bending analysis of unbonded prestressed concrete structures after cracking.
基于二维线性断裂力学理论，提出了一种表面淬火齿轮的弯曲疲劳寿命预测方法，并开发了相应的计算程序。
A method for predicting the bending fatigue life of a surface quenched gear is proposed based on two-dimensional linear fracture mechanics and a computer program is developed.
这在线性空间中是很好用，但是在弯曲立面中，用同样的方法，用的是更小的草模型。
This worked well in linear spaces. But along the curved facade I used the same method with smaller grassmodels.
本文提供一种用截断多项式求解连续梁弯曲变形的简单方法。
This paper provides a simple method for an interrupted polynomial solution for the deflection of a continuous beam.
针对工厂积累的大量生产和实验数据，提出一种基于人工神经网络计算弯曲件板料展开长度的方法。
A new method based on artificial neural network to calculate the developed length quickly is proposed according to many data accumulated during experimenting and manufacturing.
采用复变函数法和多极坐标方法，研究了弯曲波对含有多圆孔薄板的散射问题。
Scattering of flexural waves by multiple cutouts and dynamic stress concentration in the thin plates were investigated in terms of the complex variable function method and multi-polar coordinates.
本文从方材弯曲的原理出发，分析了弯曲技术及木材软化处理的一些方法。
This paper studies the theory and technology of bending cubic wood and some method of softening.
该方法对改进离心泵弯曲形扩散管的设计方法和提高其设计质量具有重要的意义。
The method is proved to be significant for improving the design method and enhancing design quality of the bend-shaped diffuser.
首次采用梁的弯曲理论和能量法结合的方法推导了弯曲力和行程的理论解析公式。
It firstly derivates theoretical analysis formula of force and stroke by using beam bending theory and energy method.
通过对管材弯曲成形过程的数值模拟方法的研究，对管材成型产品的设计和新产品的开发具有重要的意义。
Through the research of the simulation method of pipe bend forming in pipe-bender, it have important purpose for design and development of new products of pipe forming.
本文主要对双圆弧齿轮传动的载荷分配、静念啮合和动念啮合的接触及弯曲应力的分析模型和计算方法做了研究和探讨。
This paper primarily represents the study and discussion about computing methods and modeling of load share of contact stress and bending stress of static mesh and dynamic mesh of DCAHG.
众所周知，双参数方法是构造高阶问题有限元(例如薄板弯曲问题单元)的有效方法。
As it is known that the double set parameter method is an effective method for constructing finite elements of higher order problem (such as plat bending problem finite element).
众所周知，双参数方法是构造高阶问题有限元(例如薄板弯曲问题单元)的有效方法。
As it is known that the double set parameter method is an effective method for constructing finite elements of higher order problem (such as plat bending problem finite element).
应用推荐