本文利用弯曲法研究了碳纳米管膜的压阻效应。
The carbon nanotubes used in this study were synthesized by hot filament chemical vapor deposition.
用综合弯曲法成功地对成形辊进行改造设计，并取得较好效果。
A comprehensive bending method is applied successfully to both the reformation and the design of this kind of shaping roller much better effects obtained.
传统的射线追踪方法包括初值问题的试射法和边值问题的弯曲法。
The traditional raytracing methods comprise the try-shooting method of the initial value problem and the bending method of the border value problem.
用综合弯曲法成功地对成型辊轮进行改造设计，并取得较好的效果。
A comprehensive bending method is applied successfully to both the reformation and the design of this kind of shaping roller, much better effects obtained.
弯曲法比较胶带法严格，有很多场合胶带法是无法测试镀层的附着力。
Bending method more tape law strictly, there are many occasions tape can't test method is the coating adhesion.
震源定位；层析成像；震源机制； 伪弯曲法射线追踪；波数积分。
The location of the earthquakes; tomographic imaging; focal mechanism; pseudo-bending ray tracing; the integral of the wavenumber.
本文介绍在CSY型传感器系统实验仪上扩展用弯曲法测材料弹性模量新实验。
A new experiment of measuring modulus of elasticity with the flexural method on the experiment device of CSY sensor system is introduced.
或称为密着性测试，方法有弯曲法，胶带法，急冷法，切割法，滚压法，刮磨法等。
Or the gender test called dense, methods have curve method, tape method, nasty cold method, cutting method, rolling method, blow grind method, etc.
本文指出四点弯曲法是定性分析和定量计算气相沉积薄膜与基体结合强度的较理想的方法。
The four-point-bending method is a comparatively ideal method to evaluate the adhesion strength Of vapor deposited film to matrix is given in this paper.
利用弯曲法进行有倾角的层状介质的两点射线追踪，并采用改进的阻尼最小二乘法迭代求解。
Using the bent method , we do two point ray tracing in dipping layered media and have acquired solutions iteratively with the improved Marquardt least square .
本文在双半径法和边缘弯曲法的基础上，介绍了一种冷弯圆管的中部反向弯曲孔型设计理论。
According to double radius method and edge bend method, this paper introduces the design theory of roll pass with opposite direction bend in middle part for cold forming of round pipe.
结果表明：本方法比伪弯曲法的计算效率和计算精度更高，但是只适用于一维速度结构；
It turns out that the method in this paper is much more efficient and accurate than the pseudobending technique, but is only applicable to 1 D velocity model.
采用弯曲法、锉刀实验法和划线划格实验3种镀层结合力测试方法，对化学镀镍层与镁合金基体之间结合力的优劣进行了定性评价。
The adhesive force between the coating and the magnesium substrate has been estimated by using bend test, file test, and scribe test.
这一方法指的是将目光集中在恒星上，当行星从恒星前经过时产生的引力将会使光线弯曲，这时就会得到关于详细情况的报告。
The idea would be to stare at a distant star and report instances when its light had been bent by the gravity of a planet passing in front of it.
最小弯曲能量法以结构的弯曲应变能为目标函数，通过求出最小弯曲能量来求得合理索力。
The least bending energy method takes the bending energy as the objective function, and gets the reasonable cable forces by seeking the least bending energy.
用梁弯曲的力法正则方程对旋回式破碎机下架体进行了内力分析，以此为基础可对下架体进行强度计算。
The paper makes analysis to lower bracket of rotary crusher on its inner force by regular equation of beam bend, on basis of which strength of lower bracket can be calculated.
声学脉冲识别(apr)技术，一种新的弯曲波触摸屏技术，利用“声学指纹识别”法在触摸屏上对触摸位置更精准地定位。
A new approach to bending-wave touch-screen technology called acoustic Pulse Recognition (APR) USES "acoustic fingerprinting" to better pinpoint the location of impact on a touch screen.
根据应力场强法，分析了旋转弯曲疲劳极限与扭转疲劳极限之间的关系。
Through the stress field intensity approach, the relationship between the rotary bending fatigue limit and torsion fatigue limit was studied.
根据弹性薄板理论和振动理论，运用边界元法(BEM)分析了薄板弯曲自由振动的频率特性。
According to the elastic thin plate theory and vibration theory, a boundary element method (BEM) was used to analyze the frequency characteristics of a thin plate in lateral free vibration.
本文提出一个用边界元法求解薄板大挠度弯曲问题的新途径。
A new approach to the solution of large deflection bending problem of thin plates is presented by using boundary element method.
由于零件厚度薄、多向弯曲、回弹量大且相互影响，用常规回弹补偿法很难确定回弹规律。
Since the part is thin, multi-direction bending and springback is large, it is very difficult to decide the springback law using the usual compensation method.
目的：评价用平衡力法预备弯曲根管的临床疗效。
AIM: To evaluate the clinical effect of balanced force technique in preparation of curved root canals.
引入缓慢弯曲试验法，对水泥砂浆的增韧改性进行了试验研究。
In this paper research on improving of toughness for cement mortar is carried out by applying the slowly bending experimental method.
提出了考虑剪切变形时深梁弯曲问题的初参数法。
In this paper, initial parameters method for the bending problem of thick beam with shear deformation is presented.
采用复变函数法和多极坐标方法，研究了弯曲波对含有多圆孔薄板的散射问题。
Scattering of flexural waves by multiple cutouts and dynamic stress concentration in the thin plates were investigated in terms of the complex variable function method and multi-polar coordinates.
首先利用荷载增量法将薄板弯曲的非线性微分方程线性化。
At the first, the nonlinear differential equations for the bending of a thin plate are linearized by means of incremental loading method.
针对高速研磨加工中使用的弯曲成型法非球面磨具的变形特点，分析了磨具在弯矩作用下产生的弯曲变形，指出磨具高度对磨具成形误差影响较大，磨具宽度对其影响较小。
The bending deformation of the aspherical bending lapping tool under the action of bending moment was analyzed according to its deformation feature in high speed lapping process.
针对高速研磨加工中使用的弯曲成型法非球面磨具的变形特点，分析了磨具在弯矩作用下产生的弯曲变形，指出磨具高度对磨具成形误差影响较大，磨具宽度对其影响较小。
The bending deformation of the aspherical bending lapping tool under the action of bending moment was analyzed according to its deformation feature in high speed lapping process.
应用推荐