传感器引线及其保护层应为一体化结构，与变送器模块的连接应采用厂家提供的标准。
The lead wire and its protective layer of the sensor shall be of one-piece construction, and its connection with variable conveying module shall subject to the Manufacturer's standards.
发光三极管的引线框结构较为精细，产量很大，用高速冲床生产，对模具的精度和寿命要求很高。
The lead frame structures of LET(light emitting triode)are much fine and with high yields, it is for high speed punch with very high precision and life.
超级电容器主要由极化电极、集电极、电解质、隔离膜、引线和封装材料几部分组成，各部分的组成、结构均对其性能有重要的影响。
It consists of polarized electrode, collector, electrolyte, separator, lead and packing material, and its performances are affected by the composition and structure of each component greatly.
就变压器引线设计中如何考虑局部放电的问题，从计算、结构设计和工艺制造等方面做了介绍，并给出实例加以论述。
How to consider the partial discharge in the design of transformer lead is expounded from its calculating, structure design and manufacturing.
曲线的形态和样品本身的结构、超导相构成通路的情况及引线接点质量等诸多因素有关。
It was found that the shape of a R-T curve depends on the construction of samples, communication of superconducting phases and the quality of the lead contacts, etc.
介绍了IC引线框架级进冲模的特点并着重讲述了其排样设计中的整形工位和模具结构中的卸料、微调和安全机构，可供精密级进冲模设计参考。
The traits of progressive die for IC lead frame have been introduced with emphasis on the ironing stage in layout design and stripping micro-adjustment, safety setup of the structure.
结构：采用聚酯膜作介质，铝箔作电级，有感结构，单向引线，透明环氧树脂包封。
Structure: adopting po1yeser film as dielectric al foil as electrode and inductive construction unidirectional lead diaphanous epoxy resin dip sea1de.
根据超声引线键合实验平台电路结构，设计了PZT(压电陶瓷)驱动信号采集电路。
According to the circuit of ultrasonic wire bonding experiment platform, a piezoelectric transducer (PZT) driver signal acquisition circuit was designed.
介绍了引线角多工位级进模，叙述了多单元条料的切断方法，及以一种新颖的导料钉结构。
The lead wire parts multi-position progressive die is introduced, the method of multi-units strip material cutting off is stated, and a novel guide pin structure is introduced.
它们有一个低功耗与低输出阻抗的简单结构，可以用作超大规模集成电路设计中的接口电路，以减少基片的外部引线数。
They have a simple construction with low power dissipation and low output impedance and can be used as interfacing circuits in VLSI designs to reduce the number of external connections on a chip.
聚酯膜有感结构，环氧树脂包封，体积小，重量轻，引线直接焊于电极，损耗小。
Polyester film feeling construction, inductive, epoxy resin coating. Small size and light weight. Small dissipation factor, the leads directly welded to electrodes.
传感器的该导电引线和分路结构可以以公共光刻掩模化和蚀刻工艺形成从而它们彼此自对准。
The electrically conductive leads of the sensor and the shunt structure can be formed in a common photolithographic masking and etching process so that they are self aligned with one another.
文章介绍了电路结构和工作原理以及消除引线电阻、电阻应变片的温度漂移和直流稳流电源供电质量对测量准确度的影响等问题。
It introduces circuit structure, operating principle and solves problems of temperature shift and dc constant-current power supply quality effect on measuring accuracy.
本发明结构简单，紧凑合理，使引线带处于张紧状态。
The invention has simple, compact and reasonable structure and keeps the lead tape under the tension state.
本产品采用齐平膜结构和多种引线方式能够最大限度的满足客户的要求，特别适用于食品制药，饮料加工和生物制品等行业。
The product is designed to level film structure and multiplicate down-leads, which could meet requirements of user farthest, in particular suitable for food , pharmacy, drink and biology goods.
该文还介绍励磁电流引线的不同结构尺寸和不同运行工况下的传热计算结果，并分析它们对漏热的影响。
The paper presents the results as well at different sizes and operations of the leads studied, and discusses the effect of these conditions on the heat leakage.
在完成整体结构圆片级真空封装的同时，通过引线腔结构方便地实现了中间电极的引线。
Through the silicon bonding, we achieve a wafer-level vacuum package, and the wire-bonding PAD is made after the fabrication is complete.
在完成整体结构圆片级真空封装的同时通过引线腔结构方便地实现了中间电极的引线。
Through the silicon bonding, the wafer-level vacuum package is achieved and the wire-bonding PAD is made after all the fabrication work is finished.
本文从降低热负荷的角度对CTB内部冷屏、超导电流传输线、电流引线、阀及冷却管路、外部盒体的设计进行了详细阐述，为最终结构的确定提供了理论依据。
Designs of thermal shield, superconducting busbar, current leads, valves and cooling pipes, and outer box of CTB are detailed described from reducing heat load point of view. They provide...
从传热学中的特征式关联式出发，给出一种电流引线冷却面积的计算方法，并以黄铜为例计算了电流引线的结构尺寸。
The section area can be worked out according to relational formula of characteristic formula in the heat transfer. As an example, the structural dimension of…
从传热学中的特征式关联式出发，给出一种电流引线冷却面积的计算方法，并以黄铜为例计算了电流引线的结构尺寸。
The section area can be worked out according to relational formula of characteristic formula in the heat transfer. As an example, the structural dimension of…
应用推荐