引纬机构：采用梭子单纬引纬。
生产中的重点是引纬模型的编制。
Drawing up guiding weft model is very important in the production.
提出了一种新颖的剑杆织机电子引纬方法。
The article presents a new way for insertion motion on rapier machine.
织机设计人员在一直探求取代梭子引纬的方法。
Loom designers have constantly sought to replace the shuttle as a means of filling insertion.
在引纬过程中，纬纱可能会断头，纬纱卷装会用。
During filling insertion a yarn can possibly break or the filling supply package might run out of yarn.
气流引纬控制技术是喷气织造设备中的关键技术。
The control method of air filling is a key technique on weaving loom.
喷气织机采用气流引纬，其织造工艺为小开口大张力。
The air jet weaving machine employs the air picking-up, its weaving technology consisting in small shedding and large tension.
本文在大量实验基础上，分析了喷气织机引纬管道的流场规律。
On the basis of numerous experiments, the rule is analysed about the fluid fields within the picking channel of a jet loom.
运用虚拟产品开发技术，分析了剑杆织机凸轮引纬机构的动态性能。
Using the virtual product development technology, the dynamic performance of CAM mechanism of rapier loom is analyzed.
剑杆织机和片梭织机都是按每次引入一纬设计的，因此可以任意引纬。
Rapier and projectile looms, which by design insert single picks, are ideally suitedfor pick - and - pick capability.
用弹性动力学和运动学方法对剑杆织机动态引纬运动进行了综合分析。
The synthetical analysis of weft motion in the rapier loom by elastic dynamics and kinematics methods is made in this paper.
光电传感器定长引纬，不会受射流压力等因素的影响，定长准确稳定。
Length guiding woof of photovoltaic sensor will not be influenced by jet pressure etc so as to make fixing length accurate and stable.
AIT能模拟引纬过程，并且可以测试在引纬过程中纬纱的速度和速度的变化。
The AIT provides a simulation of the welt insertion and measures the speed and speed variation of the weft yarn as it is inserted.
本文通过对喷气引纬过程中气流对纬纱作用力的分析，建立了纬纱运动的微分方程。
Through an analysis of the forces acting on a weft which is inserted by air-jet in a loom, a differential equation of weft flying movement is estabilislied.
NF无梭织带机引纬机构是由一组平面四连杆机构与一组空间RSSR机构组合而成。
The picking mechanism of NF narrow fabric needle loom is composed of a plane four-bar linkage and a space RSSR linkage.
本文分析了剑杆织机椭圆齿轮——连杆引纬机构的运动规律，并对该机构进行了优化设计。
In this paper, the kinematic analyses and optimization design for elliptic gear-linkage rapier driving mechanism in rapier loom were made.
分析了G1731型剑杆织机引纬机构的原理及运动规律，探讨了剑杆织机引纬机构的调整方法。
This article analyses the movement principle and regulation of the weft insertion of rapier loom model G1731, and discusses its adjustment.
如织机具有可以按预先设置可变化纬密的电子式卷取机构，或者织机的引纬机构具有不喂入纬纱的功能。
For example, looms have electronic winding down frame that setting transformable density of weft beforehand or picking-mechanism of looms have the function of no-feeding weft.
如果两侧均为多梭箱，任何颜色的纬纱的连续引纬数可以是任意数，这种织机通常被称为任意投梭织机。
With multiple shuttle boxes on both sides any number of picks from any color can be used. These looms are often called pick - and - pick looms.
这种减少引纬所占引纬循环角度的做法是可行的，因为载纬器不必像在较宽织机上那样穿行较长的距离。
This reduction in the number of degrees of the pick cycle available for weft insertion is acceptable because the weft carrier does not have as far to travel as in the wider mechanisms.
喷气织机主辅喷嘴性能的好坏直接影响到织机气流引纬的质量，因此了解喷嘴气流场的压力情况十分必要。
The quality of is directly influenced by the performance of air-jet loom nozzle, so it is necessary to measure the pressure of air field which is formed by the nozzle.
本文针对这一问题，提出了用微机来确定引纬时间的一种方法，也就是怎样用程序来完成作图查表的工作。
But this method is very complicated, lack of accuracy, and time intensive. In this paper, a new method is described for determining filling insertion time with a microcomputer.
织机的主要工作参数如主轴转速、引纬率、经纱张力等都能够在计算机屏幕上实时显示并能够根据需要调节。
The main parameters, such as the principal axle speed, weft ratio and warp tension can be real-time showed in the screen of computer and can be changed according to…
织造过程中采用早开口，迟引纬，调整绞边及废边纱穿法，有效解决了织造疵点，使织造效率达到82%以上。
Early opening and later weft insertion were adopted in weaving, adjusting of leno selvage and waste selvage yarn can reduce weaving defects and make weaving efficiency reach above 82%.
介绍了G 1613型剑杆织机引纬系统的组成，对引纬系统的引纬和打纬等机构的运动规律进行了分析与讨论。
This paper introduces the construction of weft insertion motion of rapier loom G1613, and analyses the movement regulation of weft insertion and battening.
本文对ZGJ83型刚性剑杆织机引纬机构进行了受力分析，并找出对凸轮驱动力影响较大的构件为剑杆、投剑杆及角形臂。
A dynamic analysis under the applied force is made of the weft-insertion mechanism of the ZGJ83 rigid-rapier loom designed by the college.
运用机械动态参数测试仪，通过对THEMA剑杆织机的开口、引纬机构进行动态测试，利用计算机处理有关测试数据，分析和讨论了该机的主要技术参数。
We analyze the main technical parameter of THEMA rapier loom with the data processed by computer by testing shedding mechanism and weft insertion mechanism with mechanical dynamic tester.
运用机械动态参数测试仪，通过对THEMA剑杆织机的开口、引纬机构进行动态测试，利用计算机处理有关测试数据，分析和讨论了该机的主要技术参数。
We analyze the main technical parameter of THEMA rapier loom with the data processed by computer by testing shedding mechanism and weft insertion mechanism with mechanical dynamic tester.
应用推荐