基于SIMP密度函数惩罚模型和优化准则法，建立了一种设计变量的显式迭代格式。
Further, an implicit iterative algorithm for the design variables is also established based on SIMP interpolation scheme and optimality criteria method.
本文建立了发生贴皮现象部位的力学模型，并提出了相应的金属表面切应力的算法，作为球铁磨球斜轧中防止贴皮现象的设计准则之一。
The mechanics model is set up for the section caused folding surface and the new algorithm of shearing stress for the corresponding metal surface are produced, as being the one of the design rules.
建立了对基于电压空间矢量pwm的三相高功率因数整流器实现电流稳态无差拍控制的设计准则。
Set up the circuit design criterion for the steady - stage deadbeat control to the line current of a three - phase high-power-factor rectifier based on voltage space-vector PWM.
本文用准则法建立了大型高精度天线结构的自动迭代设计方法。
An automatic iterative design procedure for giant accurate antenna structures with the criterion method is presented.
基于动态平差模型，应用多指标动态规划工具建立了两种同时顾及精度，费用和可靠性准则的二类优化设计模型。
Starting with two models of the dynamic adjustment, two models of second order optimal design are proposed by taking into account the criteria of precision, cost and reliability.
采用状态空间平均法建立了变换器平均模型，获得了关键电路参数的设计准则和变换器的外特性曲线。
By using the state-space averaging approach, the converter's averaging model is presented, and the design criterion of key circuit parameters and the output characteristic curve are given.
最后在满足稳定性准则约束条件和最大化目标函数——转向路感的基础上，建立了电动助力转向系统参数的优化设计模型，并给出了算例。
Finally, based on the restrictions of stability criterion and maximize the object function of steering feel, an optimization model of EPAS system was built and an example was presented.
通过分析级进模工序排样设计中的模糊性准则，利用模糊综合评判理论建立了对排样方案进行优化数学模型，并通过了事例验证。
By analyzing the fuzzy regulation for design of strip layout on progressive die, a optimum model has been set up based on the theory of fuzzy multi-factorial evaluation, which has been verified.
构造了一种以结构最低固有频率作为约束频率的结构最轻重量设计方法，并建立了相应的迭代公式和收敛准则。
A method of minimum weight design with the lowest frequency as the constraint frequency is provided, and the iterative formulas and convergence criteria are found.
按满应力准则建立了弹簧优化设计的数学模型，它是一个有约束的非线性规划问题。
Based on fully stressed criterion, a mathematical model for spring optimization design has been built. The model is a constrained nonlinear programming problem.
通过归纳或整理功能原理解及冲突解决原理，并将其层次化、条理化，建立了相应的设计准则和数据库。
Throughsummarization and organization of function principle solutions and contradictionresolving principles, corresponding design rule and database are established inconsecution and hierarchy.
该文以灵敏度准则为优化设计的目标函数，建立了变形监测网混合优化设计的数学模型。
Taking the sensitivity criterion as the object function of the optimum design, the paper establishes the mathematical model for the combined optimum design of the deformation monitoring network.
在该设计准则的基础上，建立了产品健壮设计的分位数优化模型，保证了所设计产品的抗干扰能力和可靠度。
Based on the proposed rules, the percentile based optimization model for robust design was presented, which assured a product's reliability and quality robustness to the noise.
建立了流动模型，提出了以无量纲准则数雷诺数为设计纤维液膜萃取分离器的准则。
A flow model was built. Moreover, based on the theoretical analysis, Renault number was proposed as the design principle dimensionless number for fiber film extractor design purpose.
根据您在[图表]和[准则]窗格所做的设定，修改由[查询和检视表设计工具]建立的SQL陈述式。
Modify the SQL statement created by the Query and View Designer based on Settings you make in the Diagram and Criteria panes.
利用所建立的理论模型，对地砖材料及几何特性在不同冲击输入下的人员防护效果进行细致的分析，并给出人员抗冲击设计的一些准则。
The influence of critical buckling force level and some other design factors on the attenuation performance of the foam cushion is discussed in detail. Some general design rules are also presented.
依据新型滚柱活齿传动的数学模型和活齿传动原理，确定了新型滚柱活齿传动基本参数设计准则，建立了新型滚柱活齿传动的基本设计步骤。
According to mathematic model and the principle of movable tooth drive, elementary design principles and design procedures of new-type roller movable tooth drive are decided.
本文以钢筋混凝土短牛腿为例，阐述拉-压杆模型的基本原理，同时通过一个设计实例说明拉-压杆模型的建立、设计准则、设计步骤等。
The design of reinforced concrete short corbel was taken as example, with the basic principle on strut-and-tie model stated and described. An example of design demonstrates the establishment of...
本文以钢筋混凝土短牛腿为例，阐述拉-压杆模型的基本原理，同时通过一个设计实例说明拉-压杆模型的建立、设计准则、设计步骤等。
The design of reinforced concrete short corbel was taken as example, with the basic principle on strut-and-tie model stated and described. An example of design demonstrates the establishment of...
应用推荐