该程序的设计开发成功，印证了计算机建模及仿真能够作为经济理论分析研究的得力辅助工具。
The successful development of the computer game simulation proves that the computer modelling and simulation are powerful auxiliary tools for economic theory analysis.
通过对卷取机助卷辊的AJC动作及控制的分析，设计出了AJC控制系统，并对其进行了建模及仿真分析、模拟加载验证。
By analyzing wrapper roll's AJC action and control, the AJC system is designed and its mathematic modeling, emulation analysis and analogue loading verification are conducted.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
根据仿真建模的不同需要，介绍了PID调节器的控制算法及一些辅助功能。
According to the different requirement of simulation modeling, introduces the control algorithm of PID controller and some assistant functions.
基于时频变换原理，给出了频域建模、频域校正及频域仿真的方法，通过实例验证了这些方法的可行性。
This paper gives the method about modeling, rectifying and simulating in the frequency domain, and proves the feasibility of these methods through a series of examples.
对基于VRML技术在机械基础实验的实验仪器设备的静态建模方法及实验的动态仿真等的关键技术问题进行了探索。
The static state modeling method of equipment and the key technology of dynamic simulation in experiment of machinery bases based on VRML are explored.
针对保税港区海关卡口区域的建模问题，从海关监管、交通特征及排队网络分析出发建立了其离散事件仿真模型。
For modeling customs checkpost area on free trade port area, a discrete event simulation model was built by the analysis on queuing network, characteristics of customs supervision and traffic flow.
结合当前电力系统的实际需要，提出了稳定计算用励磁系统数学模型仿真建模及参数校核方法。
The simulation modeling method of excitation system for stability calculation and the check method of parameters are proposed based on the current need of power system.
图形建模软件可用于火力发电机组仿真系统中可压缩及不可压缩流体网络的建模。
The graphical modeling software can be used for model establishment for compressible or non-compressible fluid network in simulation system of thermal power-generation units.
重点对电动执行器的虚拟建模、虚拟装配、运动仿真、干涉分析和工程图生成及管理等方面进行了探讨和研究。
Emphatically, virtual modeling, virtual assembling, motions simulation, interference detection, the management and creating of engineering drawings etc. are researched and studied.
在结合微机差动保护装置算法及仿真建模的基础上，分析了负相序对差动保护的影响，并给出了相应的处理方法。
Based on the arithmetic of differential protection and simulation technique, this paper analyses the influence of the negative sequence to power system.
根据平台双轴运动实现的具体方式及运动传递关系，分析了平台稳定的有效性，并在软件环境下进行建模与仿真。
Analyze the validity of the platform by study of the moving method and transmission relationship, model and simulate the structure in software environment.
本文将对各种起落架，包括单气腔、双气腔、双油式起落架缓冲器进行数学建模，为缓冲性能分析及未来的试验仿真打下基础。
The paper builds the mathematical models of buffer, such as single air cavity, double air cavity. Also it will give basis to the buffer Function Analysis and the testing simulation.
研究了利用MATLAB进行通信系统仿真及其建模的方法，给出了几个典型仿真范例及仿真结果。
This paper studies methods of communication system simulation and constructing model with MATLAB software , and gives the several simulation examples and the results.
该文简要介绍了装备战斗损伤仿真的内容，详细论述了威胁模型、装备模型及损伤模型的基本结构及建模方法。
The content of battle damage simulation is briefly introduced in this paper, while the basic structure and modeling methods of threat model, equipment model and damage model are discussed in detail.
本文针对混流式水轮发电机组及辅助设备，从仿真对象、建模方法到仿真实现作了较深入的研究。
This paper makes a deep study on the simulation object, the modeling method and the simulation realization of mixed-flow hydraulic turbine generator unit and auxiliary machinery.
介绍了WMS2000型轮机仿真器中轴带发电机系统的工作机理、仿真系统设计及数学建模方法，并给出了部分具体数学模型。
This paper briefly introduces the principles of shaft generator in WMS2000 engine room simulator, the methods of designing and modeling, and some detailed mathematical models.
为此，简单介绍了一套较完整的仿真系统，其中主要介绍了发电机组三相短路后电压、电流数学建模过程及图形化显示方法。
The paper mainly introduces a kind of stimulatior, It emphasizes on the mathematical mode! of three phase short circuit breakdown and its showing methods.
针对WITNESS仿真环境下，复杂离散事件仿真建模过程中出现的大量顺序、并行、同步、冲突及因果依赖等关系，提出采用改进型idef 3方法进行仿真建模。
An improved IDEF3 method was presented to describe a great lot sequence, paralleling, synchronization, conflict and consequence relation during discrete event simulation using WITNESS software.
其次，对舰用动力装置及设备的减振抗冲机构进行力学建模分析，对试验结构在不同激励输入下的动力学特性进行了仿真研究。
Secondly, the mechanical model of basement of shipping power devices is deducted. The numerical simulations of dynamic characteristics of structure system are conducted.
综合利用三维实体建模技术与数据库技术，在计算机仿真模型中，构建了包括毛坯、刀具、夹具及机床等部件的“真实”数控加工仿真环境。
The nc machining simulation environment, including roughcast, tools, fixture and machine tool modeling, is constructed in computer by combining three-dimensional entity modeling and database method.
仓库设计对企业顾客服务水平及物流成本具有重要影响，而仿真建模的方法对 仓库 设计评价及优化越来越受到广泛重视。
The warehouse design has significant impact on customer service level and logistics cost for companies and has begun to be evaluated and optimized through simulation technique.
给出接收信号眼图及系统仿真误码率，pwm整流器的建模仿真，借鉴了主成分分析算法(PCA)。
The received signal is given eye and BER simulation systems, Modeling and simulation PWM rectifier it draws on principal component analysis algorithm (PCA).
文中给出了两口井的计算机仿真试验与实粘结果分析比较图，从而验证了建模方法及仿真计算的正确性。
The comparison diagram of computer simulation test and field practice between 2 Wells were shown, which testified the accuracy of the method and simulation calculation.
文中给出了两口井的计算机仿真试验与实粘结果分析比较图，从而验证了建模方法及仿真计算的正确性。
The comparison diagram of computer simulation test and field practice between 2 Wells were shown, which testified the accuracy of the method and simulation calculation.
应用推荐