应用数值分析方法对某汽车排气消声器进行了流场、温度场和声场分析。
The acoustic field, flow field and temperature field inside a muffler are studied by the numerical analyze method.
应用数值分析方法对这一模型求解，得到与实验相符的杂质原子扩散分布；
Zn diffusion profiles calculated from this model with numerical method were in good agreement with the results of experiment.
应用数值分析和计算几何理论，根据船体首部线型特点，建立首柱轮廓线数学模型；
Applying theories of numerical analysis and higher geometry, the corresponding mathematical model of stem line is established according to different stems.
介绍了应用数值分析和离心模型试验方法对三峡深水高土石围堰进行应力变形研究的成果。
This paper introduces the research results on numerical stress strain analysis and centrifuge model test for the TGPs high soil rock cofferdam.
应用数值分析方法研究了带宽限制放大传输系统中非线性增益对孤子间相互作用的控制作用。
The control of nonlinear gain for interaction between solitons has been studied by numerical analysis in band-limited amplification propagation system.
本文介绍了应用数值分析的某些方法和原理进行植物区系基本成分统计、地理成分划分及其分区。
This paper introduces some methods and principles of the numerical analysis that has been used for the statistics of basic elements, division of geographical elements and regionalization of flora.
数值模拟和分析表明，该光子晶体光纤在色散补偿型光纤方面具有广泛的应用前景。
The numerical simulation and analysis show that this type of PCF will find extensive applications in dispersion compensation fibers.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
本文采用理论分析、数值模拟与实验相结合的方法对合成射流流动机理及推力向量控制中的应用进行研究。
In this paper, the flow mechanism and the applications of thrust vectoring using synthetic jet are studied in theory, numerical simulation and experiment.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
本文阐述了如何应用间隙流动的数值模拟来分析解决贯流式水轮机的一些实际问题。
In this paper, it shows how the clearance flow numerical simulation is used to analysis and settle down the practical problem of tubular turbine.
概要介绍了船用汽轮机进汽阀箱气动性能的数值模拟分析系统的构成及其应用。
This paper briefly introduces constitutes and application of numerical simulation analysis system of gas dynamic performance for marine turbines inlet valve box.
本文对上述天线应用二维周期导纳表面理论进行了初步的理论分析、数值计算和实验研究。
Theoretical analysis, numerical calculation and experimental study are tarried out for this kind of antenna, by use of the theory of two-dimensional periodic admittance surface.
阐述了3DSIS的功能和应用，提出了3DSIS与数值分析方法、专家系统耦合集成的模型。
The function and application of 3DSIS are shown. The integrated model of 3DSIS, numerical analysis method and expert system is suggested.
以条件概率和数值分析方法为基础，提出了一种新的结构体系可靠度点值估算方法，并通过算例说明了该法的应用。
A new point-evaluation method for structural system reliability analysis is proposed based on conditional probability and numerical analysis method.
数值算例验证了混合分析法的应用、效率和精度。
The applicability, efficiency and accuracy of the mixed method are verified by numerical examples.
应用担普拉斯数值反演方法分析了群桩垂向粘弹性动力反应。
This paper presents the analysis of the vertical viscoelastic dynamic responses of pipe group by Laplace numerical inversion method.
采用有限差分数值分析方法，应用温度逐次更新处理技术对不同扰流孔下的椭圆管矩形翅片的肋效率进行计算。
The FDM numerical analytic method is applied to calculate the fin efficiency of elliptic tube with rectangular fins on which the disturbing holes were dug by using additional source term technique.
应用有限元数值计算方法，分析了复合路面在移动荷载下的动力响应问题。
The dynamic response question of composite pavement under moving load is analyzed by using the finite-element numerical calculation method.
目前，数值积分法在结构分析中的应用本质上没有突破构件的范畴，其主要原因是技术处理存在局限性，计算速度难以使人接受。
The ordinary numerical integration method has only been adopted for the analysis of the stability of steel members so far due to its limitations of handling technology and its slow computative speed.
水下结构声辐射和声传输的数值分析和主动控制研究，具有重要的理论意义和应用前景。
Numerical analysis and active control of underwater structural acoustic radiation and transmission are very important for achieving quiet submerged structures.
作者从计量段的熔体输送理论着手分析熔体的流变性，应用传热学原理对高速挤出换热进行详细的数值分析。
The melt rheology is analyzed by using the theory of melt conveying, and using the theory of heat transfer analyzes the heat transfer in the high speed extrusion in detail.
应用数值计算方法，分析了偏心钻头底部钻具组合的受力和变形特性。
The mechanical properties and the deformation characteristics of the BHA with the eccentric bit are analyzed.
应用数值传递函数方法建立了一种用于分析旋转壳静力、动力响应的截锥壳单元。
Truncated conical element is developed for analysis of revolution shells, using numerical distributed transfer function method (NDTFM).
同时讨论了己有理论分析方法和数值模拟方法的应用，分析了可燃气云爆炸研究的发展趋势。
Meanwhile, the article discussed the application of present theory analysis and numerical simulation method and predicted the trend of the research on the flammable gas explosion.
同时讨论了己有理论分析方法和数值模拟方法的应用，分析了可燃气云爆炸研究的发展趋势。
Meanwhile, the article discussed the application of present theory analysis and numerical simulation method and predicted the trend of the research on the flammable gas explosion.
应用推荐