此外，门静脉肌成纤维细胞可以产生更多且更容易伸长的应力纤维。
In addition the portal myofibroblasts form more stress fibres and are more elongated.
柔性模板的设计原理包括纤维柔性模板、锚杆悬吊模板技术和预应力纤维钢筋复合混凝土等三个方面。
The design principle of flexible formwork consists of three aspects: fiber flexible formwork, bolt suspension formwork technology and compound concrete pre-stressed by fiber and rebar.
并且为使非预应力钢筋具有与预应力纤维塑料筋匹配的防腐性能，采用先进的环氧涂层钢筋作为非预应力筋。
In order to enhance the corrosion resistance of steel bars, the epoxy coated ones are used as non-prestressing reinforcement.
纤维的吸水特性有助于保持皮肤干爽凉快，为避免摩擦力和剪应力的伤害提供了进一步的保护。
Absorbency properties in the fabric help keep the skin dry and cool, providing further protection against friction and shear.
我们跑应力有限元分析计算，确定了框架需要得到加强的最大强度和刚度，然后加强这些领域更多的碳纤维。
We ran finite element analysis stress calculations to determine where the frame needed to be reinforced for maximum strength and stiffness, then reinforced those areas with additional carbon fiber.
研究中主要讨论了基体、纤维和界面的力学性能以及纤维位向的变化对应力传递和应力分布的影响。
The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.
界面上的应力传递要求纤维与基体之间具有有效地偶联。
The stress transfer at the interface requires an efficient coupling between fiber and matrix.
在钢纤维混凝土单元开裂处理中，引入应力释放因子和剪力传递因子。
In dealing with the cracking of steel fiber concrete element, the stress release factor and shear transfer coefficient are introduced.
本文综述了聚合物基纤维复合材料界面残余应力的形成、测定方法和各种理论分析方法。
In this paper, an overview of the formation, determination and various theoretical analysis methods of residual stress at the fiber - polymer interface is presented.
结合原有的混凝土疲劳损伤模型，建立了预应力钢纤维混凝土板的疲劳损伤演变方程。
Based on the fatigue cumulative damage models, a damage evolution equation for flexural fatigue of SFRPC slabs is set up.
基于此模型，分析了受拉伸的层内混杂复合材料中某些纤维断裂后的应力重分布。
Based on the model, the stress redistributions due to the failure of some fibers in an intraply hybrid composite under tension are analyzed.
这种热残余应力可以表示为纤维、基体材料性质以及纤维束几何参数的函数。
The thermal residual stresses can be indicated as a function of the properties of fibers and matrix materials and geometry of twisted fiber bundle.
在纤维端部存在高切变应力视为导致产生裂缝的因素。
The occurrence of high shear stress at the fibre end is a factor which is expected to lead to crack generation .
通过直接拉伸试验，测量了配筋钢纤维自应力混凝土的抗拉强度。
Uniaxial direct tensile experiments were carried out to obtain tensile strength of self stressing concrete reinforced with steel bar and fiber.
PET纤维-甲胺系统的化学应力开裂被归结为一种高聚物断裂破坏现象。
The chemical stress cracking of PET fiber-methylamine system is considered to be a fracture phenomenon of polymers.
试验结果表明，玻璃纤维长丝纱有较明显的应力松驰现象，反复循环负荷作用对玻璃纤维长丝纱的强伸性能有较大的影响。
As a result, the stress-relaxation of yarn is obviously observed, and the cyclic loading has much more influence on the tensile property of yarn.
随施加应力的增大，纤维的恒蠕变速率增大，抗蠕变断裂时间变小，蠕变断裂伸长变小。
The constant creep rate was increased and creep-resistance breaking time and creep breaking elongation were decreased with the increase of applied stress.
通过对陶瓷基复合材料应力、临界纤维长度的讨论可知，复合材料的强度应考虑纤维取向和纤维长度。
The critical length of fiber and the stress of composites are discussed in this paper. The direction and length of fiber in the composites affect the strength of composites.
碳纤维制自行车是有前途的，通过应力计算会找到最适合的加工条件！
Carbon fiber of bicycle is promising, through the stress calculation can find the most suitable processing condition!
结果表明，纤维取向对玻璃纤维增强塑料的应力腐蚀行为有很大影响。
The results show that the fibre orientation affects on the stress corrosion cracking of GRP seriously.
采用自行设计的水泥砂浆塑性收缩应力测试装置研究了低掺量下聚丙烯纤维对水泥砂浆塑性收缩应力影响。
In this paper, the effects of polypropylene fibers on the plastic shrinkage stresses of the cement mortars were investigated by use of self-designed plastic shrinkage stresses measuring device.
纤维复合材料的力学特性很大程度上依赖于纤维和基体的应力传递。
Mechanical propertys of fiber composites largely depend on stress transfer of fiber and matrix.
钢纤维自应力混凝土是一种新型纤维增强复合材料。
Steel fiber reinforced self-stressing concrete is a new type of fiber reinforced composite.
碳纤维车架是把碳纤维对着发生应力的方向层层叠而得到强度。
Carbon fiber is put on the frame of the direction of stress and strength layered-over.
在纤维的轴向应力达到其强度的地方，纤维逐步破成小的碎片。
The fiber breaks into incrementally smaller fragments at locations where the fiber's axial stress reaches its tensile strength.
施工中可采用MPFC防治法，即对复合式地铁车站可从材料技术、预应力技术、纤维混凝土技术及施工保障系统出发进行全面防治。
MPFC method may be adopted for prevention in the construction, namely, to make full prevention for the station from respects of material, prestress, fiber concrete and construction guarantee system.
研究了TWINTEX纤维增强塑料在酸中的应力腐蚀，并与玻璃纤维增强塑料的应力腐蚀进行了比较。
Stress corrosion cracking of unidirectional TWINTEX yarn reinforced plastics was investigated and compared with that of unidirectional glass fibre reinforced plastics.
复合材料压力容器的纤维缠绕预应力对容器的性能有很大的影响，合理设计这种纤维预应力可提高复合材料容器的综合性能。
The reasonably prestressing of carbon fiber wound on composite material vessel, which have great influence on vessel's capability, can improve the integrated performance of composite material vessel.
试验结果表明，钢纤维自应力混凝土能够明显地提高压力管道的抗裂承载力。
The experimental results show that steel fiber reinforced self-stressing concrete can significantly increase the cracking load of penstock.
试验结果表明，钢纤维自应力混凝土能够明显地提高压力管道的抗裂承载力。
The experimental results show that steel fiber reinforced self-stressing concrete can significantly increase the cracking load of penstock.
应用推荐