开发岩体应力状态分析软件是地质动力区划课题研究工作的重要内容之一。
Software development of rock mass stress state analysis is one of the important problems of the geo-dynamic division team's research.
分析在弯曲工况、制动工况、转弯工况和扭转工况下的应力与变形状态，对应力集中位置结构提出改进方案。
Do research on the stress and deformation state in the condition of bending, braking, turning and reversing, and then make a program that improves the structure of the frame.
1991年以来的地壳运动趋势分析，对判断该区域的应力状态和地震大形势具有一定的参考意义。
The analysis of the crustal movement tendency since 1991 have some significance for the judging stress state and large seismic situation in the area.
分析了非均匀接触下燕尾形榫头连接的应力状态，并借助于模拟试验，提出了非均匀接触导致疲劳破坏的基本痕迹特征。
The basic fatigue failure characteristics have been analyzed according to the stress analysis and simulation test under inhomogeneous swallowtail between compressor disk and blade.
通过研究基坑的变形，锚杆的受力状态和轴力的分布规律，来分析预应力锚杆柔性支护的力学性能。
The mechanics of its performance are studied by researching the deformation of excavation, the force of anchor and the distribution of axial force.
另外，本文借助有限元程序分析了墙体的应力分布状态，这为实际工程中的概念设计提供一定的参考。
Further more, this paper analyzed the wall's stress distributing state by the finite element program, it provides a reference for concept design in the practical engineering.
推导出单向和双向拉伸应力状态下的内时本构方程，据此分析了分散性失稳和集中性失稳。
The endochronic constitutive equations under uniaxial and biaxial tensile stress state are given to analyze diffuse instability and localized instability.
进行了井下巷道地震反应的弹塑性分析，探讨了地震力作用下巷道围岩应力状态的变化规律。
The elastic-plasticity numerical analysis of a tunnel model which subjected to earthquake waves loads is done to study the tunnel surrounding rock's dynamic stress state.
对这些有缝结构进行计算分析时，接缝及裂缝状态的变化会使得接触界面的范围和界面上的应力和位移不断发生变化。
When analyzing structures with joints or cracks, state changing of these interfaces will affect stress and displacement of contact surface.
对环状波形阀簧的变形特性和应力状态进行了理论分析，得到了一系列设计计算式；
This paper analyzes the load-deflection and stress characteristics of the ring-wave spring in theory, and obtaines several calculating formulas.
利用有限元法分析KE495发动机曲轴的内部应力分布状态，得出原曲轴结构的不合理之处。
The finite element method is used to study the internal stress distribution condition of the KE495 engine crankshaft, then the unreasonable design of the original crankshaft is known.
本文采用非线性有限元方法，对极限工况下该区域的应力状态作了分析计算。
The non-linear finite element method was used in this paper to analyze the stress distribution in the area.
用有限元法对服役状态的摩托车铝合金轮毂进行了应力分析。
Stress of al motorcycle wheel under the service condition was analyzed with finite element method (FEM).
利用形状记忆合金的本构关系，分析了在自由应力状态下的残余应变与温度的关系。
The relationship between the residual strain and the temperature under free stress condition is analyzed by using constitutive relation of SMA.
对挤压过程热传递过程分析表明坯料冷却程度与其所处应力状态和保温介质有关。
It shows that the thickness of cooling hard layer is associated with the state of stress and heat preservation material by analyzing the heat transfer principle.
通过试验结果与应力场分析，讨论了不同应力状态参数下，金属材料韧性断裂形式的变化规律。
Through the analysis of test results and stress fields, the change of metal materials' ductile fracture mode with different stress condition parameters are discussed.
在建立接触副统计表面分形模型的基础上，分析了不同加载条件下的接触应力对磨损状态的影响。
The statistical fractal model of contact surfaces is presented, and the influence of contact stresses on damage states under different load condition is analyzed.
采用传统的极限平衡方法来分析边坡的稳定，没有考虑土体本身的应力—应变关系，其工作状态是虚拟的。
Analyzing the stability of the side slope through classical ultimate balance method, the working state is fictitious without considering the stress-strain relation of the soil mass.
给出了板状介质在重复率泵浦和连续泵浦情况下的温度分布和应力状态的解析解，对板的热效应进行了分析与讨论。
Analytic solutions of temperature and stress distributions in condition of CW and pulse pumping are given. We have analyzed and discussed the thermal distortion in the slab.
对有限元的计算结果进行了分析，对运用最大剪应变等值线、大主应变等值线确定可能滑动面，运用应力水平分析单元的受力状态进行了研究。
The results of FEM are analyzed , and the action of the strain isoline , stress level isoline, energy isoline and safety factor isoline is applied.
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
本文应用基于多重剪切塑性本构模型和液化状态面的有效应力分析方法，探索了液化场地微型斜桩的抗震性状和桩土动力相互作用机制。
Herein an effective stress analysis method using a multiple shear plasticity model and a concept of liquefaction front was used to investigate the static and dynamic.
本文利用弹性层状体系计算程序，对沥青路面内的应力应变状态进行了详细的分析。
This paper USES the layered elastic analysis calculation procedure to analyze the stress condition and the strain condition in asphalt pavement.
基于湿吸力概念，分析并给出了有效应力公式，建议了非饱和土的状态分类及有效应力原理。
Based on this absorbed suction concept, the classification of saturation in soil and a principle of effective stress are proposed for unsaturated soils.
分析了与各种制动工况有关的热负荷作用下辐板形状不同的整体辗钢车轮的应力变形状态，给出了分析和计算结果。
The stress strain conditions of integral rolled steel wheels with different shapes of web plates under the heat load related with various braking conditions are analyzed.
分析预应力钢筋混凝土正截面承载能力极限状态计算公式。
That have analyzed prestressed reinforced concrete normal section calculate formula of bearing capacity limit states.
基于单轴应变疲劳分析，提出了比例加载多轴应力状态下的疲劳寿命计算方法。
Based on the local strain method of the single axle stress condition method, the multi axial stress condition computing method of the proportional loading is presented.
计算并分析了震源力学状态这种变化在其周围产生的附加应力场，以及反映这一过程的地应力变化特征。
Based on this variation of mechanical state at the earthquake fault, the additional stress given rise on its surroundings and the stress change of this process have been computed and analyzed.
计算并分析了震源力学状态这种变化在其周围产生的附加应力场，以及反映这一过程的地应力变化特征。
Based on this variation of mechanical state at the earthquake fault, the additional stress given rise on its surroundings and the stress change of this process have been computed and analyzed.
应用推荐